Sneaky Pete stuff

Custom made glass and adapters to work with your favorite vaporizer. Glass adapters to fix the Pax 3, DaVinci IQ, Arizer Air/Solo/Solo 2, Dynavap, and more! These are quality and affordable components to enhance your vaporizing experience.
Bring harmony to your vape setup with this versatile adapter. This low profile adapter is a super easy way to turn your 14mm female joint into a 10mm female. It allows you to hook up your favorite 14mm female water...
These adapters will allow you to use two male joints together. The adapters are sturdy and approximately 2.5" tall, and will work with your favorite water piece and vaporizer adapter. To attach two 14mm male pieces, select the 14mm Female...
Complete your V.A.S. (Vaporizer Accessory Stand) with a Round Top or Flat Top Glass Stopper. Made from borosilicate glass, the Glass Stopper allows you to fill the reservoir arm with isopropyl alcohol and will prevent the alcohol from evaporating. Isopropyl...
These adapters will allow you to use any two 14mm female joints together. The adapters are sturdy and approximately 2.5" tall, they will work with your favorite water piece and vaporizer adapter.
The Aristocrat Stem introduces extra length and sophistication to your DynaVap set-up. Measuring in at an extended 90mm length, the Aristocrat Stem is easier to handle for large hands and also offers some additional cooling. Available in seven striking colors,...
With our Arizer 3-in-1 Glass Adapter, you can use your Solo 2 or Air 2 on any water piece with a female joint. It is the perfect option for any Arizer owner looking to enhance their experience with a water...
The 3D Flow Stem features striking and functional divots throughout the length of the stem to increase the surface area your vapor passes over. The increased surface area allows for more cooling of the vapor, resulting in a smoother draw....
This adapter fits directly into your Arizer Air 2/Solo 2, replacing the traditional stem. It is very easy to install on your device, and it's just as easy to remove (it has a tight fit, heat your device before you...
If the Arizer Air 2 or Solo 2 are part of your vape game, well, here's a game changer! The BubbleMax gives you the cooling of a large water-piece in a compact package, delivering cool hits through your Arizer vape. The difference...
This 3-In-1 Adapter will allow you to use your Arizer Go (ArGo) with either a 10mm, 14mm, or 18mm female water piece! The Arizer Go is an amazing portable, but it's also a great vaporizer to run through water. You...
Advanced 3D glass nipple cooling technology for your Arizer Go, now with a carb cooling system! While the stem still has the same glass nipple cooling, you now have the option to feather your finger on the carb to clear the...
The Arizer High Airflow 3-in-1 adapter features one single large diameter hole in the vapor path protecting your herb with a stainless-steel screen. Sized to work perfectly with either the Solo 2 or Air 2, this adapter fits on any...
The Arizer High Airflow Coil Stem is an effective way to add the effects of boosted water cooling to your Arizer Air 2 or Solo 2 without needing to add liquid. Vapor will travel through over 12” of coiled cooling...
The Arizer UltraDry Stem is a custom made stem featuring 10 pairs of glass cooling nipples to disrupt vapor flow and mellow out your hit. The UltraDry Stem also has an easily accessible carb hole to allow you to easily...
Like the smaller original, the new Baby Bong V2 XL is designed to work with DynaVap tips so you can have water-cooled vapor wherever you go. It is one-third larger than the original and holds over twice as much water,...
The Copperhead is a hybrid design glass stem for DynaVap that combines the twisting vapor pathway and added length of our Sidewinder stem with the advanced glass nipple technology of our Hula and longer Hula XL stems. Only 5” end-to-end,...
How do you make the Crafty+ even better? Simple. Add the Stainless Steel Cooling Unit. It absorbs heat from the vapor, delivering clean, pure flavor, while its sturdy stainless steel construction is incredibly easy to clean. It includes both a...
The Crafty+/Mighty Mini Bubbler fits snugly on either device, and comes with a soft silicone base, or with a two-piece design depending on your preference. The bubbler delivers cooling hydration to your vape hits, while being small and discrete enough to...
The Titanium Mouthpiece for the Crafty+/Mighty brings the ultimate in durability to your vaporizer. This Titanium Mouthpiece is almost as light as our Glass Mouthpiece, but is infinitely stronger and adds all of the additional benefits of titanium. Titanium is...
The Crafty and Mighty undoubtedly have some of the highest quality plastic you'll find on a vape, but even the best plastic will never be comparable to glass! This glass mouthpiece enhances your Crafty or Mighty experience by adding extra...
This adapter fits directly onto your Crafty/Mighty, you simply remove the cooling unit and twist this into place. It is very easy to install on your device, and it's just as easy to remove. Once it's installed, you can...
These Glass Syringes are the perfect way to fill a TH2 Cartridge or to dispense your concentrate! The Syringe is made from glass and features a Luer Lock to keep the syringe contents fresh. The Short Blunt Tip Needle attaches...
Simple, elegant, and effective, the pure glass utility stand features a wide, stable base with three different joint options: 14 or 18mm male, or 14mm female. Easy to clean and versatile, they're a great place to store your glass pieces,...
The Gnarly Stem for DynaVap is a serious looking stem that provides serious cooling action. The Gnarly Stem is made from thick transparent glass and is a full 6" in length, for huge vapor path extension. It features a broad...
The Hula Stem V2 XL works with a stainless steel or titanium DynaVap tip to add cooling and the purity of glass to your DynaVap experience. Simply place any DynaVap tip onto the Hula Stem XL and heat like normal....
When glass meets glass, ensure the connection stays secure with our plastic Keck Clips. Whether you're securing a freshly filled bowl of flower, or keeping your mouthpiece or Sidestep Adapter firmly in place, these clips ensure that your glass stays...
The LittleFinger Adapter is the easiest, cleanest, and most convenient way to use any DynaVap tip with a waterpiece. With its universal 10, 14, or 18mm male joint, the LittleFinger truly does adapt to whatever your needs are. Two wide...
The Maraca Glass Stem combines many different cooling elements in one piece that’s convenient and comfortable to hold and use. The tip end is sized to fit any stainless steel or titanium DynaVap tip, and The Maraca Stem’s glass it...
Advanced 3D glass nipple cooling technology has made the leap from our stems over to this new mouthpiece for your Mega Globe or Sneaky Pete Globe. Eight nipples increase the air-path's total surface area, adding an extra layer of vapor...
The Mighty Stainless Steel Cooling Unit provides enhanced cooling for the Mighty by replacing the original plastic mouthpiece - making the best portable vaporizer even better. With its included titanium or glass mouthpieces, the Mighty Stainless Steel Cooling Unit absorbs...
Our custom branded MoodMats will prolong the life of your glass piece, and give you a nice soft place to safely put them down without worry. Our branded MoodMats are made from upcycled neoprene - including wetsuits, gaskets, weatherstripping, wheelchair...
The Pass-Through Adapter creates amazing versatility for vaping through water. It features a 14mm female to 14mm male pass-through adapter, with an added 10mm female adapter on the side. As a multi-function adapter it enables you to:- Use the adapter...