Water Pipe Adapters

Vapvana All-Star Glass Bowl – Clean Flavour, Smart Airflow Built specifically for the All-Star heater, the All-Star Glass Bowl brings clean, pure glass performance to your desktop setup. It mirrors the All-Star’s heater profile for efficient heat transfer and dense, flavour-rich vapour, while the glass build keeps the taste crisp and true. Purpose-Built for the All-Star This bowl’s geometry matches the All-Star heater shape for consistent extractions and smooth airflow. A replaceable fine-mesh screen is pre-installed, and extra screens are included so you can keep sessions fresh with minimal downtime. Clear Without Lifting the Heater A built-in 10 mm pass-through on the side lets you clear your piece without removing the heater head. It’s faster, cleaner, and easier - especially during back-to-back draws. Fits Most Rigs Out of the Box The bowl features a 14 mm male joint to pair with the majority of water pieces. Running an 18 mm rig like Vapvana’s Big League Bubbler? You’re covered—an 18 mm adapter is included. Locked-In, Dialled-In An included Keck clip (joint clip) secures your connection, helping prevent accidental pulls when you lift the heater or clear the piece. What’s Included All-Star Glass Bowl (profile-matched to All-Star heater) Fine-mesh screen (installed) + extra screens 14mm male joint (bowl base) 18mm adapter Keck clip (joint clip)

Read more less

The PreClean Dry Ash Catcher – Keep Your Bong Cleaner with First-Stage Filtration Whether you combust or vaporize, keeping your bong clean can be a challenge. That’s where The PreClean Dry Ash Catcher comes in. Acting as a first-stage filtration system, this glass ash catcher is designed to trap ash, flower, and debris before they enter your bong—making it one of the most effective ways to keep your bong cleaner for longer. It’s much easier to clean a compact glass ash catcher than a large water pipe, and once you start using this kind of bong accessory, you’ll immediately notice the difference in cleanliness and maintenance. Works with Combustion or Vapour If you use combustion, this ash catcher for bong setups helps collect the majority of ash right at the bowl, preventing it from clogging up your water pipe.If you’re a vaporizer user, it works like a dry herb catcher, grabbing loose flower bits that would otherwise drop into your bong and gunk it up. Designed for Larger Setups These ash catchers have a solid build and a noticeable weight, so they're best paired with larger, heavier water pieces. They will shift the centre of gravity of your setup, so we recommend pairing them with stable bases. Two Versions – Choose What Fits Your Setup Twister (Large – Dual Twisting Interior) A visual standout with serious function, this large dry ash catcher features a dual-twist interior design that looks incredible as vapour passes through. It offers smooth airflow and effective dry filtration—perfect for full-size bong setups. Shorty (Compact – Opposing Glass Filters) Smaller and lighter, this compact ash catcher fits medium and smaller bongs with ease. Its dual opposing glass filters efficiently trap ash and flower bits while keeping your rig more balanced and portable.

Read more less

Mr. Twister Deluxe – The Ultimate Dry Herb Catcher for Water Pipes The Mr. Twister Deluxe is an advanced dry herb catcher designed to keep your water pipe cleaner, reduce maintenance, and improve airflow. This must-have accessory is perfect for anyone using a vaporizer with a water piece, catching the majority of loose herb particles before they enter your water pipe. With an integrated pass-through adapter and an innovative dual-stage catching system, the Mr. Twister Deluxe takes dry herb catchers to the next level, making your sessions smoother, cleaner, and easier to manage. Why You Need a Dry Herb Catcher When using a vaporizer with a water pipe, small bits of ground flower inevitably fall through your adapter. Over time, these particles clog your piece, dirty the water, and create buildup that’s a hassle to clean. A dry herb catcher like Mr. Twister Deluxe traps these particles before they enter your water pipe, helping to: ✔ Keep your water piece cleaner, longer✔ Reduce the need for frequent deep cleanings✔ Make cleaning easier with a small, detachable piece What Makes the Mr. Twister Deluxe Special? Built-In Pass-Through Adapter – Features a 14mm female top, 14mm male bottom, and a 10mm adapter with a removable glass stopper. Easy Vapour Clearing – No need to remove your vaporizer—simply pull the glass stopper to clear vapour from both the dry herb catcher and water pipe. Innovative Twisting Glass Tube – A secondary catching chamber with a spiraled green glass design catches even more loose particles, improving performance. Drop-Down Intake Tube – Optimized airflow design improves filtration efficiency. Large Catching Reservoir – Holds more herb particles, extending the time between cleanings. How to Use the Mr. Twister Deluxe Attach the Mr. Twister Deluxe between your water pipe and vaporizer adapter. Use your vaporizer as normal—loose herb particles will be caught before they enter your water piece. To clear vapour, simply pull the glass stopper instead of removing your vape, preventing accidental breakage. Clean as needed by soaking the catcher in isopropyl alcohol—much easier than deep-cleaning an entire water pipe! FAQs About the Mr. Twister Deluxe Q: Will this catch all loose herb particles?A: While no catcher will grab every single piece, the Mr. Twister Deluxe captures the vast majority—and as it gets slightly sticky from use, it becomes even more effective. Q: What makes this different from a regular dry herb catcher?A: The pass-through adapter with a glass stopper makes clearing vapour much easier and safer, reducing the risk of breaking your vaporizer or water pipe. Q: How often do I need to clean it?A: It really depends on your usage, but a quick alcohol soak every few days/weeks/months will keep it performing at its best—much easier than cleaning an entire water pipe. Q: Will this fit my water pipe setup?A: The 14mm female-to-male connection is compatible with most standard water pipes and vaporizer adapters, plus it includes a 10mm adapter/stopper. Why the Mr. Twister Deluxe is a Must-Have for Water Pipe Users ✔ Prevents herb from entering your water pipe✔ Keeps water cleaner and reduces deep cleanings✔ Easy vapour clearing with the pull-out stopper✔ Twisting glass tube catches even more herb✔ Durable, high-quality glass construction✔ Affordable, yet highly effective upgrade Once you try a dry herb catcher, you’ll never go back—and the Mr. Twister Deluxe is one of the most advanced and functional designs yet. Protect your water pipe, simplify maintenance, and enjoy smoother sessions every time.

Read more less

A Better Way To Use Your Chill Pipe Transform any Chill Steel Pipe into a functional hookah for optimal vaporizer use with the new Chill Hookah Set. Constructed from 100% food-grade silicone and strong borosilicate glass, the Chill Hookah Set turns your Chill Steel Pipe into a versatile water piece with a streamlined air path—perfect for dry herb vaping, dabbing, or slowly enjoying a bowl without the need to clear a large chamber. For anyone wanting a more compact Chill experience with a smaller air volume, this set is your solution! The Chill Hookah Set includes: - Chill Silicone Hookah Adapter- Chill Whip Silicone Hose- Borosilicate Glass Plug- Borosilicate Glass Mouthpiece Setup Instructions: First, detach the Chill Neckpiece from the Base and replace it with the food-grade Chill Silicone Hookah Adapter. Next, assemble the Chill Whip by connecting the Borosilicate Glass Plug and Mouthpiece to each end. To switch up the airflow, remove the Downstem from the front Downstem Gasket and insert it down through the Silicone Hookah Adapter, then place the Borosilicate Glass Plug end of the Chill Whip into the Silicone Downstem Gasket. Inverting the airflow provides better balance for vapes like a DynaVap HyperDyn or VonG, Puffco Proxy Glass Adapter, Ceramic Hookah Bowl, and more. If you prefer not to invert the setup, keep the downstem in its original position. The Borosilicate Glass Plug fits snugly into the Silicone Hookah Adapter, so you can simply attach the Chill Whip to the top of your Chill Base in place of the Neckpiece. Upgrade your sessions with the Chill Hookah Set—crafted for smooth, flavourful vapour and enhanced versatility. Visit our blog for a full review and user guide to see why this steel pipe upgrade is a game-changer for vaporizer enthusiasts.

Read more less

Ed’s TNT Venty Water Pipe Adapter – Handmade in Mississippi Ed, a true OG in the custom wood accessory game, has been crafting unique, high-end pieces for longer than just about anyone. If you're someone who appreciates premium quality, the Ed’s TNT Venty Water Pipe Adapter (WPA) is exactly what you’re looking for. Premium Craftsmanship Each piece is handmade by Ed in Mississippi, ensuring exceptional quality. Ed personally inspects everything he creates, guaranteeing a perfect fit for your Venty. This adapter couples seamlessly with a silicone shoe, letting you use your Venty with any 14mm water piece for a luxurious experience. Extra Filtration Option This WPA also includes an optional basket screen, giving you the option for additional filtration. Whether you prefer basic or high-end accessories, Ed excels at delivering premium quality with a personalized touch. Versatile Design While the main intent is to pair with the Venty, a happy accident is that it also fits in a Tinymight 2. It works perfectly as a 14mm WPA for the Tinymight 2, as long as you use the included basket screen, offering unexpected versatility to this piece. Gorgeous Cocobolo Wood Crafted from stunning cocobolo wood, each adapter is completely unique. Since no two pieces of wood are alike, you’re guaranteed a one-of-a-kind piece that’s as visually striking as it is functional. This is another great accessory from Ed, and it showcases the skill and attention to detail he’s become known for over the years.

Read more less

Sneaky Pete Pass-Through Injector Bowl The Sneaky Pete Pass-Through Injector Bowl is an 18mm female bowl designed to work with most injector vaporizers, including the Terp Hammer, Freight Train, B-Zero, and many more. Secure and Replaceable Metal Screen Featuring a 20mm metal screen, this bowl offers superior airflow for the biggest and smoothest hits. The screen stays securely in place, allowing you to stir your bowl without hassle. Additionally, it's removable and replaceable, so you can easily pop in a new one whenever needed. Universal Connection The Sneaky Pete Pass-Through Injector Bowl terminates in a 14mm male connection, making it compatible with the most popular water pieces. This ensures you can use it with your favourite setups without any compatibility issues. Innovative Pass-Through Design The standout feature of this bowl is its pass-through connection. This design allows you to easily clear your water pipe without needing to remove your vaporizer. This not only simplifies the process but also reduces the risk of breakage, as you can leave everything assembled and just remove the glass stopper to clear your pipe. Superior Airflow for Optimal Hits We chose a metal screen to provide superior airflow, allowing you to take the biggest and smoothest hits possible with minimal draw restriction. While glass screens have their own advantages, the metal screen in the Sneaky Pete Pass-Through Injector Bowl is specifically designed for maximum performance.

Read more less

Premium XL Bowl Upgrade Introducing the 18mm Female XL Glass Injector Bowl, a premium upgrade from the standard option. Maximized Compatibility Featuring an unfrosted 18mm female input joint, this injector bowl ensures your vaporizer slides in and out with ease. It's designed to fit a wide range of popular devices, ending in the widely used 14mm male joint size. Enhanced XL Capacity For Heavy Hitters This XL version offers a significantly larger bowl capacity compared to the original model. With double the size of the regular bowl, it's ideal for those who want bigger hits. You can pack a substantial amount of flower for massive hits or use a smaller amount for regular function. Robust Metal Screen The rigid metal screen stays securely in place, even during stirring. The fluted bowl design allows the screen to fit snugly, providing a durable solution when handled with care. Replacement screens are also available if you need a fresh one. Easy To Handle The 18mm Female XL Glass Injector Bowl comes with a sturdy glass arm on the side, making it easy to move and handle, even when hot.

Read more less

Cool Down your VENTY Vapour If you have tried a VENTY, and chances are you have if you’re reading this, then you are fully aware of incredible power from this portable made by the most prominent name in vaporizers, Storz & Bickel. For both cloud chasers and casual vapists, adding water to your VENTY setup is a no brainer, and with the VENTY Water Pipe Adapter, it is very simple to do. Tough Where it Needs be, Tender Where it Should Be This Water Pipe Adapter has been measured and engineered so that you’ll be able to easily use your VENTY with a water pipe. The silicone construction, along with an internal metal tube that runs the length of the stem, is rigid enough to hold your VENTY securely in place but also gentle enough not to damage your device. It’s kind of like that Phil Collins song, “Easy Lover.” One Adapter, Two Sizes Easy to install, just remove the native cooling unit from the VENTY and twist the Adapter in place. That’s it! The Adapter will work with either 14mm or 18mm pieces, so most of your glass collection should now be available to use with your VENTY. Chase the Biggest Clouds More Comfortably As the VENTY is a tall device, we definitely recommend keeping a hand on it during use when using with a water piece. Not only is the VENTY tall, but it’s a powerhouse that’s easily capable of milking up water piece, so put it through its paces with less harshness on your throat. Enjoy the Volcano output from this portable package with greater comfort with the help of the VENTY Water Pipe Adapter.

Read more less

Bonger Silicone Water Pipe Adapter Those who think there’s only one way to skin a deer aren’t being creative enough. The boys at DynaVap get that, big time, and are always finding new ways for you to enjoy your current products in new and valuable ways. Enter the DynaVap Bonger, a new silicone accessory to use your favourite DynaVap tip and cap combination through a water piece. Use With Any Tip & Cap DynaVap is respected for the flexibility in their lineup, and this ingenious little guy is the perfect way to interface a DynaVap with a water piece. The Bonger works with any current tip and cap in their roster, showing the tendency towards compatibility that DynaVap has worked hard to establish. Stainless Airpath Only 45mm in length, the Bonger works with both 10mm and 14mm water pieces directly without needing another adapter. We’re really stoked on the stainless-steel condenser that runs directly from the CCD in your tip down through the Bonger and then out to the water piece. This takes the Bonger beyond just an adapter and adds both the purity of a stainless airpath and the easy-cleaning nature of metal to the system. Affordable & Airport-Free And for the first time ever… this DynaVap does NOT include an Airport! I know right? Mind blown. But the airflow is perfect for maximum thickness and milkiness action; adding additional airflow is totally unnecessary, this is engineered for performance. This super affordable accessory comes in black or green/black variation. If you already own a DynaVap tip and cap, the Bonger is your easy avenue to using them through water, which is probably our favourite way to use a DynaVap to begin with.

Read more less

Keep Your Water Pipe Clean Dry Herb Catchers are the must-have accessory that you never knew you needed. When using a water piece, as you inhale through a vaporizer, small bits of flower will inevitably pass through the adapter and enter into your water piece, which can make a mess. A Dry Herb Catcher sits on the intake joint of your water piece, and acts as first stage filtration to prevent the majority of that flower from entering into your water piece, keeping it way cleaner for much longer. As they are made from glass and hold no water themselves, they will not reduce the flavour or strength of that delicious vapour. A Dry Herb Catcher can come in different shapes and styles, all having their own unique advantages. You can select from the Barrel, High Airflow, or the Mr. Twister version of Dry Herb Catcher, depending on your preferences.  All of our Dry Herb Catchers feature a 14mm female input joint and a 14mm male output joint.

Read more less

If you’re anything like us, you can’t get enough of experimenting with different setups using tools from your vape arsenal. Batman is always making Alfred create experimental gadgets, like Batarangs with smoke bombs attached, so let me be your vape-Alfred and facilitate your experimentation by offering the 14mm Water Pipe Adapter for the Tinymight. Everyone’s favorite portable dry herb vape from 2021 has one issue: its vapour output heavily outweighs its native cooling capacity. It's much more pleasant to use it with water cooling, but there are no parts included with the Tinymight to make that possible. This 14mm Water Pipe Adapter is the perfect solution. It features a permanent glass screen with good airflow and slides snugly into the body of your Tinymight. The commonly used 14mm size of the Adapter gives you a secure connection with your glass water pipe and the tough construction means you can use the weighty Tinymight at an angle with no worry about breakage. Measuring 3.25” in length and a great aesthetic fit with the device, you’ll now be able to add as much water filtration as you'd like, to get the level of cooling that you’re seeking.  If you don’t have anything on your vape utility belt yet, adapters are always a good choice as the first addition. Open up the capabilities and possibilities of your portable vaporizer with the 14mm Water Pipe Adapter for Tinymight.

Read more less

This 18mm Female Glass Injector Bowl is a luxurious replacement for the default solution. The unfrosted 18mm female input joint allows the injector-style vaporizer to slide in and out smoothly, and is deep enough to accept any of the popular devices on the market. The bowl terminates in either a 14mm male or 18mm male to give you more options. The metal screen is rigid and stays in place even while stirring.  The fluted bowl allows for the screen to slot in place, leading to a near permanent solution when treated kindly.  Replacement screens are also available should you want install a new one at any point. The 18mm Female Glass Injector Bowl also includes a sturdy glass arm on the side that allows for easy movement and handling of the bowl, even while hot.

Read more less

The Crafty+/Mighty+/DynaVap 14mm Whip Adapter 14mm Whip Adapter is the perfect way to add some length to your air-path and cool your hits through a water pipe while using these top-notch dry herb vaporizers. This super direct and straightforward way to lower your vapour temperature attaches directly to the stock mouthpiece of your Crafty or Mighty; there is no need to remove the cooling unit. When using the Whip Adapter, you can keep your vape upright, there is no need to invert it, just hold it in your hand, sit it on a table, or whatever you prefer. Measuring just under 35cm long, the business end of the Whip ends in a 14mm male joint for maximum compatibility. The end which attaches to the mouthpiece of your vaporizer has a nice tight fit for a perfect seal. A great option for any owner of a Crafty, Crafty+, Mighty, or Mighty+, add the 14mm Whip Adapter for an easy, viable cooling option. This adapter will also work with any standard DynaVap body to add a 14mm male whip adapter to your favorite VapCap!

Read more less

Ed Makes A Great Tinymight 2 Adapter We’re happy to bring you another beautiful piece from master craftsman Ed of Ed’s TNT, the Wooden Tinymight WPA. These wonderful works of art pair with your Tinymight to bring you a marvelous execution of a simple idea.  Made from beautiful cocobolo wood, this multi sized water pipe adapter (WPA) will work with 14mm and 18mm female joints. When using this adapter, you can skip the cooling unit in your stock stem as you will be taking advantage of water cooling. Simply place your flower in the conical screen (two included) and you’re all set. The fit and finish on these adapters is immaculate; you’re getting a truly beautiful and unique piece of art. Utilize the cooling power of water with your Tinymight by adding Ed’s TNT Wooden Tinymight WPA.

Read more less

This is a 3-in-1 solution for using your Fury Edge with your favorite water tool. This official Healthy Rips accessory Water Pipe Adapter is sized to fit 10, 14, and 18mm female joints, and it keeps your vapor path 100% pure glass to ensure the cleanest flavor.

Read more less

The Sneaky Pete Master Adapter™ fits almost all vaporizers to any water tool with a female joint. The adapter itself is two separate individual accessories that perfectly fit together. The smaller piece goes neatly within the larger piece so it's all one very convenient package less than 1.5" tall. The smaller adapter has a gradual inner taper for more narrow round tips, while the larger adapter has distinct cutouts for specific vapes. Together, they fit your bong to any cartridge and all DynaVap stems and bodies. They also adapt for the Arizer Solo 2, Air 2 and ArGo, the Flowermate V-5 Nano, the DaVinci IQ, the RBT Splinters, the E-Nano… Pretty much any vape with a round mouthpiece works with this accessory thanks to its innovative design and silicone flexibility. The Master Adapter covers more vapes than any other adapter on the market. Key Features: - 100% silicone, durable and shape-able- For 10mm, 14mm and 18mm female joints- Works with more vapes than any other adapter- Most affordable way to adapt the most vapes for water use

Read more less

Do not over-tighten the adapter onto your vaporizer! It only needs a slight/eighth turn, over-tightening will damage your vaporizer. This water pipe adapter is designed to fit Crafty and Mighty vaporizers to take your vaping to the next level. Plumb in a water pipe to your vape set-up for cooler vapour, concentrating it through percolation for larger and cloudier hits. The adapter comes in 14mm and 18mm male vaporizer joint variations, and connects universally to 10mm, 14mm, and 18mm female water pieces. Easy to install, simply remove the cooling unit on your vaporizer, then line up the slots on the adapter with the holes on your device. Very slightly twist the adapter to secure it; an eighth turn will make it completely secure. Be sure not to twist the adapter too much! Over-tightening will damage your vaporizer. Once the adapter is secured, attach your modified vaporizer to your water pipe of choice and enjoy fresh water hits. Highly recommended for Crafty and Mighty users for a superior vape experience.   Key Features: - Compatible with Crafty, Crafty+, Mighty, or Mighty+ vaporizers- Durable plastic housing contains borosilicate glass for a pure vapor path- Replaceable screen included- Easy to assemble - Available with a 14mm or 18mm male vaporizer joint- Universally adapts to 10mm, 14mm, and 18mm female water pieces

Read more less