If the Arizer Air 2 or Solo 2 are part of your vape game, well, here's a game changer! The BubbleMax gives you the cooling of a large water-piece in a compact package, delivering cool hits through your Arizer vape. The difference in performance after adding the BubbleMax is dramatic, while maintaining the discrete and portable attributes of Arizer vapes.
Standing 6" tall with a tube percolator boasting 4 slits for additional bubbling, the BubbleMax gives you an easy draw from a mouthpiece canted to a comfortable position, all through pure glass, tip to tip. We designed and built both variants of the BubbleMax here at Sneaky Pete Vaporizers to fit perfectly with the Multi-Stand, and it's an addition we're thrilled to share with you. Get the cooling you'd expect from a stand-alone water-piece and change your game.
Get the BubbleMax; it's cool.
Key Features:
- Compatible with the Arizer Air MAX, Air 2 and Solo 2- Numerous slits on percolator provide cooler temperature hits- Ultimate purity from all glass production with a permanent filter - Portable and discrete, but highly effective- Designed to be a significant improvement over the stock experience- We love this one!- Never leave a water piece unattended on your vape, remove the water piece between uses
The LittleFinger Adapter is the easiest, cleanest, and most convenient way to use any DynaVap tip with a waterpiece. With its universal 10, 14, or 18mm male joint, the LittleFinger truly does adapt to whatever your needs are. Two wide glass bands provide extra durability while also allowing you to set the unit down when it's hot, as it holds the tip suspended in the air rather than laying it on the table. Plus, it's enjoyable to watch the vapor travel through the glass.
Fun, versatile, and super convenient. Get cooling hydration combined with the purity of glass with the LittleFinger Adapter.
Go to the whip with any 10, 14, or 18mm female water piece by using the Universal Whip Adapter. The multi-sized glass connector allows for more functionality than our standard whip adapter. And with its 8.1mm whip connector, it can be used with a Volcano Hybrid, Arizer Extreme Q, and many more setups. Ready to whip it good? Get the Universal Whip Adapter.
Sneaky Pete says:
The new Captive Cap will help to keep your Cap right where it should be; on your device. The new Captive Cap brings about enhanced functional geometry, creating more evenly distributed airflow. In addition, the heat up and cool down 'clicks' are more noticeable. The updated Captive Cap stays firmly in place, while still rotating freely on the DynaVap. The new Cap will work on any DynaVap tip to allow for full cross compatibility.
Sneaky Pete says:
Made of pure quartz, just like the original, the Quartz Deep Dish Replacement 2-Pack is great to have on hand in case yours show signs of wear and tear. It's also a good idea to replace your quartz dish periodically for best flavor and maximum efficiency. In either case, the Quartz Deep Dish Replacement will look good on your e-nail, and keep your vaping experience as pure as possible.
'Optimal vaporization' are the key words with the MiniNail Quartz Banger. The MiniNail delivers low and consistent heat to the banger, which then delivers more of your concentrate to you. No 'pooling then cooling' as can happen with a torch; just great vaping with smooth rich flavor. The custom designed 5mm thick quartz base and sturdy quartz walls retain heat beautifully, especially at lower temperatures. 5mm extra thick base for better heat retention, 14mm male connection, includes silicon band for optional fastening.
Must-Have MiniNail Accessory
Get the perfect heating setup with MiniNail's Gen 2 Heater Coil Stand. Designed to hold your Quartz Banger, Hybrid Nail or Heater Coil securely so you can elevate your dabbing experience, while keeping things safe. Crafted from high-grade polished stainless steel and available in a beautiful gold finish, the MiniNail Heater Coil Stand also features a slot for storing useful accessory tools like dabbers close to the action, this stand is an essential companion of any MiniNail eNail set up.
Store Your MiniNail Safely
Storing your hot MiniNail on a stand like this is preferable for many users as compared to leaving a hot MiniNail on their favourite water piece, and this is the perfect place to store your MiniNail setup with your most used accessories right where you need them. The Coil Stand is priced right and will soon find a permanent place in your setup.
Handmade in California from high quality German Schott glass, this Glass Shovel Dabber is perfectly designed for scooping concentrates. Precision cut with a shaped shovel style dabber tip, it measures 3 1/2" in length, and can easily scoop materials that other dabbers struggle with. It will smoothly fit all the way to the base of any MiniNail type: Quartz Hybrid Nail, Titanium Nail, Quartz Hybrid DeepDish Nail, or Quartz e-bangers.
Dab tools (used to scoop concentrate into your dab rig) are often makeshift: screwdrivers, nails, tent pegs, human teeth... They have to be metal to withstand the heat (ok forget the teeth) and they should be clean. What microscopic crud was on that screwdriver that you’re now inhaling into your lungs? Call me old fashioned but I believe in the adage 'a job for every tool, and a tool for every job'.
Cue the SPV Artisan Series - Long Handled Dab Tool. It’s purpose-built for dabbing, giving it optimal design and functionality. The pure grade 2 titanium spade was custom made by DynaVap, and it tapers to a spade, making it easy to scoop and manipulate your concentrate.
The handle is bespoke from Ed’s TNT, individually crafted from one of two woods: either Mexican T’zalam (pronounced salam) or Mexican Katalox. Both come from lumber with lots of curly stripes which gives a vibrant look. The Katalox is the denser of the two with a deep rich coffee/chocolate tone.
One of the best features of this piece is that no matter how you set it down, the tool won’t roll and the blade won’t ever touch the surface. This prevents contamination of the spade or losing precious material.
This is the first custom collaboration between two of our favorite vape artists, combining their strengths to form a line of connoisseur-grade vape tools.
Key Features:
- Brand new innovative dab tool- 4” long wooden handle by Ed’s TNT- 1.5” wide titanium blade by DynaVap- 5.5” total length- 0.5” thickness- Smart design prevents rolling and contact with surface- Wide titanium blade with a tapered point for ease of use- 100% made in the USA
The Crafty+/Mighty+ Mini Bubbler fits snugly on either device and comes with a soft silicone base. The bubbler delivers cooling hydration to your vape hits, while being small and discrete enough to take with you on-the-go, or keep out of sight at home. A screen on the bottom of the Mini Bubbler is designed to prevent flower from getting into the water piece, keeping the experience clean and pleasant. The Crafty+/Mighty+ Mini Bubbler is well built, and will elevate your vaping experience with cool, water-conditioned vapour.
Works with the Crafty, Crafty+, Mighty, or Mighty+ by Storz & Bickel.
Sneaky Pete says:
Our custom branded MoodMats will prolong the life of your glass pieces and give you a nice soft place to safely put them down without worry.
They are made from upcycled neoprene, from sources such as wetsuits, gaskets, weatherstripping, wheelchair seat molds, and stock car tires, which are combined to create Lava Rubber. It's a green process that's good for the environment, while creating a cool looking accessory to keep your glass pieces and table tops scratch free.
These custom branded Sneaky Pete MoodMats are 12" x 12" tip to tip, and provide a safe place to sit for even the largest glass piece you have.
The Cadillac of E-Nails
The MiniNail is designed, engineered, assembled and packaged in the USA. It’s built to premium quality standards using only first-class materials, including third party tested pure titanium. The setup is small enough to go with you anywhere, but it’s heavy-duty enough to be your desktop daily driver. The MiniNail runs at very low power, about 20% of a normal e-nail, meaning it is cheaper to operate, very safe, and it will last longer than other e-nails. The manufacturer stands behind the MiniNail with a 2-year warranty on both the power/control box and the heating coil, something that’s almost unheard of in this industry. There is a very accurate digital temperature display, and the ideal range is 400 to 600°F, but it can go up to 1,000°F to do burn off cleanings.
Ready to Plug In and Go
Each kit includes a MiniNail power control box of your color choice and a hybrid coil heating element. One kit comes with a premium quartz E-banger and includes a glass carb cap and dabber. The other kit has a hybrid quartz/titanium universal nail with a multi-tip dabber/carb cap tool and two quartz dishes (titanium dish no longer included). Both include a 6' power cord and silicone dab mat.
Our Go To Concentrate Solution
Winner of our 2019 Vape Award for concentrate product of the year, the MiniNail is our daily driver for concentrates, and it'll soon become yours too!
Use 10mm Vapes with 14mm Glass Simply
Bring harmony to your vape setup with this versatile adapter. This low profile adapter is the super easy way to turn your 14mm female joint into a 10mm female. It allows you to hook up your favorite 14mm female water piece to a 2020 DynaVap M, or any other 10mm male vaporizer or accessory, and you're all set. This low profile adapter will not add any height, is barely noticeable, and fits snugly. Bring flexibility to your vaping rig: Adapt!
If low profile isn't your thing, we offer a traditional version as well. Same quality, same functionality, different height.
Complete your V.A.S. (Vaporizer Accessory Stand) with a Round Top or Flat Top Glass Stopper. Made from borosilicate glass, the Glass Stopper allows you to fill the reservoir arm with isopropyl alcohol and will prevent the alcohol from evaporating. Isopropyl alcohol is the ultimate cleaning solution for all of your vapes and accessories, so keep it close at hand at all times. Vape enthusiasts know the V.A.S. is the perfect accessory for all of your desktop organizational needs, and the Glass Stopper will give even more utility to your setup.
Keep it clean, keep it wipey! Your glass items, vapes, and accessories will shine with Great White Wipes. Our individually wrapped wipes are made with 99% isopropyl alcohol, made of sturdy material to give them the strength to handle the toughest jobs. There's no scent or additives, and the purity of the alcohol means the Sneaky Pete Wipes will leave your vaporizers clean and hygienic, with no residue left behind. Each wipe measures an expansive 20cm x 15cm, so there's no fussing with undersized wipes. Whether sharing a puff with a friend, or just doing some regular vape maintenance, these wipes will ensure fresh clean hits. Our wipes come in a bargain sized box of 50.
Wipe out grime and germs, and make your vapes pristine, with Great White Wipes.
The Maraca Glass Stem combines many different cooling elements in one piece that’s convenient and comfortable to hold and use. The tip end is sized to fit any stainless steel or titanium DynaVap tip, and The Maraca Stem’s glass it thick and durable. Behind the tip is a shotgun carb to clear the entire stem with a massive rush to the head. After the carb is a restriction point followed by an expansion chamber, causing even more cooling. The chamber contains three glass beads to further condition and cool the vapor, and it's enclosed at the back end by a pinch point with three pokes. Finally, three glass nipples agitate the vapor completely before ending at the mouthpiece, much cooler and cleaner than when it left the tip.
On top of everything else, it can double as a musical instrument. Name another DynaVap stem that can do that 😉
Key Features:
- Clear glass w/red glass beads- 85mm length- Fits any DynaVap tip- Shotgun carb at tip end- Glass beads agitate and filter vapor- Restriction point/expansion chamber adds cooling- Glass nipples finalize conditioning and complete cooling
The Bent-Neck Carta Top is the perfect replacement and upgrade for its factory water attachment. It’s sized to fit directly onto your Carta base and has the same percolator and water volume to cool those monster rips the Carta is known for. This piece’s advantage is having the neck stretched and bent at an angle, so it’s not just a straight opening in the top like the original model. The bent neck design more naturally matches the angle you use when dabbing with the Carta, so it's much more comfortable, plus the bend helps eliminate any splashing. The mouthpiece is flared and worked for a better feel and the borosilicate glass is thick and durable, complementing the Carta's rugged design.
Sneaky Pete says:
By clicking earlier in the heating cycle, DynaVap’s Low Temp Captive Cap helps you be more consistent with your torching times, enabling you to vape your flower with less risk of combustion and enjoy a more complex flavour profile. It makes the routine more predictable and enjoyable for many, and it is much more efficient with your material. The Low Temp Captive Cap also has a specialized logo to help you tell it apart from the rest.
This Sidestep Adapter is sized 14mm with a male joint at one end and a female joint at the other. There isn’t much vertical difference between the joints, but it moves the connection about 3.5” off to the side of the Mega Globe, so now your vapes and bangers won’t sit directly on your rig itself. Sidesteps are handy to catch debris and reclaim, keeping your water piece cleaner. You’ll also protect your Mega Globe (or another piece, it fits any 14mm rig) from being in direct contact with vapes or hot bangers. Keep your investment safe and save time on maintenance with our Sidestep Adapter for the Mega Globe.
The industry standard that keeps getting better, the Crafty+ by Storz & Bickel will keep its spot on your utility belt. Great out of the box, the battery powered Crafty+ also features a complimentary Android app and an iOS compatible web app that furthers control over basic settings.
This Crafty+ heats up 30% faster than its predecessor and boasts increased battery life and modern USB-C charging as well. The Crafty+ can provide about 40 minutes of session time more than the original model as well as charging roughly 25 minutes faster. The Crafty+ has a new, slick design and can feel very different from the original.
Reaching a temperature of 210C and operating from one single button, you’ll be happy with how quickly the Crafty+ can switch through its three temperatures selected right from the device. Using improved housing materials and electronics, we’re still as thrilled with this device today as we were when it first released.
Like the rest of the Storz & Bickel line, the Crafty+ has updated its filling chamber from stainless steel to ceramic coating. Ceramic coating is more durable, is easier to clean and promotes enhanced flavour; a clear homerun.
These are official Healthy Rips replacement O-ring/Stainless-Steel Screen sets made to fit the Fury Edge/Fury 2/Rogue. They come in a set of two and are perfect replacements if you've lost yours or just want some backups.
This is a 3-in-1 solution for using your Fury Edge with your favorite water tool. This official Healthy Rips accessory Water Pipe Adapter is sized to fit 10, 14, and 18mm female joints, and it keeps your vapor path 100% pure glass to ensure the cleanest flavor.
This official Health Rips accessory is a convenient way to add a little water filtration and cooling to your Fury Edge. It attaches directly onto the vape itself, so you don’t need an adapter or anything else. It features a two-chamber body to keep you from getting splashed, and it keeps your vapor pathway 100% pure glass for the cleanest taste.
These official Healthy Rips Dosing Capsules are the perfect accessory for a simple load and go experience with your Healthy Rips Vaporizer. Simply put, these caps will keep your pre-loaded herb secure, great for a quick pack of your vape at a moment's notice. Plus they come with the added bonus of keeping your bowl cleaner for longer. Which means less time cleaning your vaporizer and more time enjoying the goodness it provides.
This handy pack of four dosing caps comes encased in a clear tube for super convenient portable storage. Before you set off for the day, you can easily pre-load the caps by scooping directly through your stash, lightly packing the herb and popping the cap back on. The cap is a little tricky to remove, especially for those of us with big clumsy fingers, but you can blame that on the secure seal that’ll keep your pre-packed herb safely within.
One thing to note is that the dosing capsules get very hot during use, so take care while removing them from a warm device, or let it cool for a few minutes before switching them out. The capsules themselves absorb lots of heat, so you may need to compensate by increasing the temperature on your vape when using a capsule.
They come in two sizes, with a perfect fit for either the Healthy Rips Fury 2 and Fury Edge, or the Rogue. These capsules also fit other devices like the POTV One vaporizer and the TinyMight. This is a perfect accessory for your Healthy Rips vaporizer that’ll make each session almost too convenient, and no clean up!
Key Features:
- Load and Go!- 100% pure stainless steel- Set of four w/ plastic capsule case- Dimensions: 10.5mm x 11mm - Capsule capacity: 0.09-0.11g
