All Accessories

Cap Armor — Stainless Steel Sleeve Upgrade for DynaVap Captive Caps More mass. More heat retention. More power — without replacing the cap you already love. Cap Armor is a precision-machined stainless steel sleeve designed to snap over a compatible DynaVap Captive Cap, adding serious thermal mass and heat retention to your setup. Think of it as a modular alternative to an Armored Cap: you keep using the cap you already trust, but you gain a smoother, more consistent heat cycle and a noticeable bump in extraction performance. The big quality-of-life upgrade is heating. With the added mass surrounding the cap, heat spreads more evenly through the sleeve, so you can point your torch and heat without constantly spinning your device. That means less technique, less hot-spotting, and an easier path to repeatable results—especially for anyone chasing that “one-hit” style extraction. In real-world use, Cap Armor helps push your DynaVap toward full extractions in 1–2 heat cycles with less guesswork. Because it’s modular, Cap Armor can be installed or removed whenever you want. It’s not difficult to take on and off, but if you plan on using it daily, many users prefer dedicating one to each cap in their rotation. It’s inexpensive, it’ll last forever, and it’s one of those upgrades that just makes the whole DynaVap experience easier and more effective. Features Modular performance upgrade: Precision-machined stainless steel sleeve that clicks onto compatible Captive Caps to add mass instantly. Enhanced heat retention: Added thermal mass smooths heating, extends cycles, and improves thermal consistency. No-spin heating: More even heat spread means you can aim the torch and heat without constant rotation. Stronger extractions: Helps achieve full extraction in 1–2 heat cycles. Microdose friendly: Still works with the DynaVap half-bowl setting for extremely efficient small loads. Built to last: Stainless steel construction designed for years of daily use. Compatibility Compatible with: Captive Caps in good condition Not recommended for use with: Non-Captive Caps, dented caps, PVD-coated caps, or Special Edition engraved caps How to Use Install: With your Captive Cap on an assembled device, gently press the cap into Cap Armor until you hear an audible click. Remove: While the cap is installed on a tip, brace your thumb on the digger-outer against the tip, then gently wiggle and pull Cap Armor off. Do not push from the top to separate—this may dent the cap. Notes Because this is a press-fit design, minor dents or impressions on the upper crimp of the Captive Cap are possible. This is normal and will not affect function of either part. Sneaky Pete Vaporizers — U.S. source for DynaVap parts, performance upgrades, and accessories.

Read more less

Crossing Tech Vital Tool Set — Essential Loading & Cleaning Kit A compact, versatile tool kit designed for dry herb and concentrate users who want cleaner handling, easier loading, and better control during every session. Overview The Crossing Tech Vital Tool Set is a highly practical accessory kit built for everyday use with dry herb and concentrate devices. Whether you're loading bowls, stirring mid-session, or keeping things clean, this set gives you the right tool for the job — without clutter or guesswork. Each tool threads securely into a comfortable birch wood handle, allowing you to swap tips quickly depending on what you’re doing. Everything packs neatly into the included zippered case, making it perfect for home use or travel. What Makes It Useful Cleaner loading — avoid using fingers or dumping material directly from a grinder. Precision tools — ideal for small bowls, microdosing, or detailed cleanup. Concentrate-friendly — scoop and slice tools work great for sticky material. Easy maintenance — included brush helps keep screens and chambers clean. Portable storage case — keeps everything organized and protected. Premium Materials & Compatibility All tool tips are made from non-magnetic SS304 stainless steel, offering durability, corrosion resistance, and easy cleaning. Each tip uses standard 10/24 threading, making them compatible with a wide range of popular modular systems and handles — including those from Crossing Tech, Vapvana, Cannabis Hardware, and Terp Chasers Club. The included birch wood handles are comfortable to hold and commonly sized for use with bowls and wireless heating setups. What’s Included 1 × Large Scoop 1 × Small Microdose Scoop 1 × Scoop / Slice Tool (ideal for concentrates) 1 × Stirring / Poke Tool 1 × Cleaning Brush 4 × Birch Wood Handles 1 × Zippered Storage Case (approx. 155 × 115 × 35 mm) Why Add This to Your Setup? The Vital Tool Set is one of those accessories that quickly becomes essential. It keeps your sessions cleaner, more efficient, and more enjoyable — whether you're using dry herb, concentrates, or both. Affordable, compact, and genuinely useful, it’s a smart upgrade for anyone who values clean handling and well-organized gear. Sneaky Pete Vaporizers — official retailer of Crossing Tech accessories and premium vaporizer tools.

Read more less

Mad Heaters Reload 3 — Aluminum Storage & Tool System An all-in-one aluminum storage and tool system built for the Tempest, Dynavap, and other magnetic cap devices — compact, airtight, and built for everyday use. Sorry, your browser doesn’t support embedded videos. Overview The Mad Heaters Reload 3 is a precision-engineered aluminum storage and tool system designed for Tempest users, Dynavap enthusiasts, and anyone looking for a durable, modular, magnetic setup. Built with convenience and efficiency in mind, it keeps every essential tool organized in a single compact unit. Featuring multiple airtight containers, integrated tools, and a built-in cooling magnet, the Reload 3 streamlines your workflow whether you’re at home or on the go. Key Features All-in-One Aluminum Design: Compact, durable, and modular storage and tool system. Three Airtight Containers: Bottom pot (28 ml, ~3 g), mini pot (20 ml, ~2 g), and dedicated ABV pot (28 ml). Built-in Decapper: Compatible with Dynavap caps — Standard, Armored, and Hyper. Tempest & Tornado Compatible: Opening tool integrated into the underside of the lid for Tempest V1, V2, and Tornado. Cooling Magnet: Safely stabilizes and cools hot caps between uses. Adjustable CCD Inserter: Adjustable for Tempest use; fixed half-bowl option for Dynavap users. ABV Pot with Removable Debowler: Keeps spent material contained and easy to clear. Integrated Tamper: Built into the bottom of the pots for quick packing. Precision Machined: Minor anodizing marks may be visible due to the manufacturing process. Specifications Material: CNC-machined anodized aluminum Size: 97 mm × 38 mm Weight: 85 g (with all three pots) Pot Capacities: Bottom 28 ml (~3 g), Mini 20 ml (~2 g), ABV 28 ml Performance & Design The Reload 3 is designed to unify storage, maintenance, and session flow into a single purpose-built tool. Airtight containers help preserve freshness, while the integrated decapper and CCD inserter simplify setup. The cooling magnet adds safety and convenience, and the overall build reflects Mad Heaters’ focus on intentional, functional design. Why Choose the Reload 3? Versatile, durable, and thoughtfully engineered, the Mad Heaters Reload 3 is an essential companion for butane-powered setups. From packing to cooling and storage, it handles every step efficiently in one cohesive system. Ideal for Tempest and Dynavap users who value organization and build quality. Final Thoughts The Reload 3 goes beyond basic storage — it’s a complete session companion. Compact, intelligently laid out, and built from anodized aluminum, it keeps your essentials clean, accessible, and ready whenever you are.

Read more less

YLL Silicone Adapter & Glass Tube Set — Perfectly Straight DynaVap Heating A custom silicone adapter and glass tube set for the YLL IH 3.0, designed to hold your DynaVap perfectly straight for cleaner, easier, more consistent heating. See the YLL IH 3.0 in action. Overview The YLL Silicone Adapter & Glass Tube Set is a simple upgrade that dramatically improves your experience with the YLL IH 3.0. The stock glass tube and silicone works, but it isn’t designed specifically for DynaVap. Your tip tends to sit on an angle, wobble slightly, or need to be manually centered. This custom adapter set fixes all of that. The silicone insert is sized specifically for DynaVap, so your tip sits perfectly straight and centered every single time. That means easier, more consistent heating, and a cleaner, more predictable workflow. Key Features Built for DynaVap — optimized to hold your DynaVap straight in the YLL IH 3.0. No more wobbling — fixes angled placement and ensures a repeatable heating position. Custom silicone adapter — grips the glass and stem securely while remaining easy to remove. Matched glass tube — sized to work with the adapter for a perfect fit. More consistent roasting — straighter alignment = more even heat around the cap. Supports standard caps — ideal for regular DynaVap caps in the YLL IH 3.0. How It Improves the YLL IH 3.0 The YLL IH 3.0 is powerful and flexible, but the default tube isn’t tuned specifically for DynaVap stems. This can lead to: Uneven heat distribution around the cap Mild hot spots or inconsistent extractions Needing to hold the stem manually to straighten it With this silicone adapter & glass tube combo, your DynaVap drops into the exact same straight position every time. You get more reliable clicks, smoother extractions, and a relaxed, hands-free heating experience. Compatibility This accessory is designed for: YLL IH 3.0 induction heater Standard DynaVap Caps and stems Oversized or specialty caps may not seat as cleanly, but standard caps fit perfectly. Final Thoughts If you're using your YLL IH 3.0 primarily with DynaVap, the YLL Silicone Adapter & Glass Tube Set is an inexpensive, high-impact upgrade. Straight alignment means better flavor, better consistency, and a smoother workflow every time you heat your cap. Sneaky Pete Vaporizers — your US source for YLL IH 3.0 accessories and DynaVap upgrades.

Read more less

YLL DynaVap Decapper Stand — Hands-Free Cap Removal A compact metal decapper stand with a strong magnet, designed for smooth, hands-free removal of any DynaVap cap — including HyperDyn and Armored caps. Overview The YLL DynaVap Decapper Stand makes removing a hot DynaVap cap fast, safe, and effortless. Just place your cap onto the magnet, give it a gentle lift or twist, and the stand takes care of the rest — no burned fingers and no awkward juggling. It’s built from durable metal with a routed groove sized for all DynaVap tips, ensuring stable placement whether you’re using a standard cap, HyperDyn, or the heavier Armored Cap. Key Features Hands-Free Decapping — remove hot caps instantly with a smooth lift or twist. Strong Center Magnet — grips any DynaVap cap securely, including large and heavy styles. Precision Metal Build — durable, stable, and cut with a groove to hold the device firmly. Compatible with Every DynaVap Cap — standard, HyperDyn, Armored, and specialty caps. Great for Faster Reloads — cools caps quicker and improves session flow. Why Use a Decapper Stand? If you've ever tried to remove a hot DynaVap cap with your fingers, you know why this accessory exists. The Decapper Stand solves three common problems: Hot caps that stay warm for longer — especially HyperDyn and Armored caps Unstable surfaces when trying to cool or remove a cap Interrupted session flow while waiting for safe handling temperatures A decapper lets you lift the cap the moment you’re done heating, giving you quicker cooldowns and faster reloads every time. Compatibility Works with all DynaVap caps, including: Standard Caps HyperDyn Cap Armored Cap Compatible with every DynaVap tip and stem style. Final Thoughts The YLL DynaVap Decapper Stand is one of those small upgrades that instantly improves the way you use your DynaVap. With a strong magnet, clean metal construction, and full compatibility with all caps — even the big ones — it’s a simple tool that makes every session smoother, safer, and more enjoyable. Sneaky Pete Vaporizers — premium DynaVap accessories shipped fast across the USA.

Read more less

Crossing Heated Dab Tool (Hot Knife) Load clean. Drop clean. No mess. The Crossing Heated Dab Tool is the easy way to load sticky concentrates into your wax pen or e-rig without scraping the sides of the bowl. A ceramic hot-knife tip, three voltage levels, and simple one-button controls let you warm and release your dab with precision. It’s compact, USB-C rechargeable, and comes with a protective cap for pocket-safe carry. Key Features Heated ceramic tip for smooth, mess-free loading 3 voltages (Blue / Green / Red) to match different concentrate textures Two heat modes: quick cycle (double-click) or manual hold USB-C charging with included cable Protective cover cap for safe storage 550 mAh battery for plenty of reloads between charges One-button operation—fast to learn, easy to use Why You’ll Like It Less mess: Warm the tip and your dab slides cleanly into the chamber—no more hard scraping. Better control: Choose a lower level for softer waxes or higher for firmer concentrates like shatter. Pocket-friendly: Lightweight, capped, and ready to travel. How to Use the Crossing Heated Dab Tool Remove the glass/plastic cap. Power on: Press the button 5× to turn on (repeat to turn off). Select voltage: Press 3× to cycle Blue → Green → Red. Heat the tip: Quick cycle: Press 2× to start a short auto heat. Manual: Press & hold to heat while you load. Scoop your concentrate, hover over the chamber, then warm the tip—after a few seconds the dab will slide offcleanly. Replace the cap when finished and power off. Tip: Use Blue/low for most waxes; bump to Red/high for firmer textures. Battery & Charging The integrated 550 mAh battery delivers many reloads per charge. Top up with the included USB-C cable. As with any small device, actual run-time will vary by heat level and usage. Easy Cleaning While the tip is still warm (not red-hot), wipe it with a vape-safe cleaning wipe to remove residue. Keep the protective cap on during storage to extend tip life and prevent debris. Specifications Tip Ceramic heated “hot-knife” style Heat Levels 3 voltages (Blue / Green / Red) Controls 1 button • 5× power • 3× level • 2× cycle • hold to heat Battery 550 mAh (integrated) Charging USB-C Cap Included protective cover Use Case Loading wax pens & e-rig chambers What’s in the Box Crossing Heated Dab Tool (Hot Knife) Protective tip cover USB-C charging cable Owner’s manual FAQs Which heat level should I use? Start on Blue for softer waxes. If the dab doesn’t release cleanly, step up to Green or Red for firmer concentrates like shatter. How do I keep the tip clean? Wipe the tip while warm with a vape-safe cleaning wipe every few sessions. Avoid scraping with metal tools. Will it work with my wax pen or e-rig? Yes—this tool is brand-agnostic. It simply helps you transfer concentrates cleanly into most chambers. Is there an auto shut-off? The quick-cycle heat runs for a short, pre-set interval. Always power off when finished and replace the cap. Safety Notes The tip gets hot—keep away from skin, fabrics, and flammables. Allow the tip to cool before capping or cleaning. Charge with a quality USB-C cable and reputable power source. Store capped, out of reach of children and pets.

Read more less

Vector Mystique Single Flame Torch Lighter The Vector Mystique pairs a sleek, vertical profile with one of the most comfortable ignition systems we’ve used. At 3.37" tall, 0.78" wide, and 0.94" deep, it’s slim, pocket-friendly, and built from metal for everyday durability. Key Features Side-Lever Ignition: Low-effort, natural thumb press to ignite and hold the flame Ultra-Slim Vertical Design: Tall, narrow body for easy everyday carry Large Flame Dial: Oversized adjuster at the base—turn with thumb and finger (no tool needed) Metal Construction: Solid feel and long-lasting durability Stylish Finishes: Metallic blue or gunmetal satin The side-lever ignition is the star here: press the small metal lever that rests flush against the body to fire the torch, then keep it comfortably depressed as long as you need. Because you’re holding a lever—not pushing in or flicking sideways—it’s exceptionally easy on the thumb and a great choice for anyone with mobility or grip issues. With its slim profile, simple operation, and large, easy-to-use flame adjustment, the Vector Mystique is an outstanding everyday carry torch lighter that blends comfort, style, and performance.

Read more less

Vector Stratos Single Flame Torch Lighter The Vector Stratos is a single flame torch lighter that stands out with its bold steampunk-inspired design and durable metal build. Compact at 2.87" tall, 1.30" wide, and 0.73" deep, it blends eye-catching style with practical performance. Key Features Steampunk Aesthetic: Unique industrial design with tactile controls Protective Jet Cover: Prevents dust and debris from entering the flame jet One-Press Ignition: Single button both opens the cover and ignites the flame Metal Construction: Built to last with premium textured or glossy finishes Adjustable Flame: Screwdriver-friendly control at the base Unlike most lighters with exposed jets, the Stratos features a built-in protective cover that flips open as you ignite, keeping the torch clear and ready to use. The push-down ignition is highly tactile — one smooth press opens the cover and sparks the torch, making it feel as satisfying as it is functional. Available in a textured matte black finish or a glossy sparkle burgundy reminiscent of a sports car, the Vector Stratosdelivers both style and substance for anyone who wants their everyday carry lighter to stand out.

Read more less

Vector Summit Single Flame Torch Lighter The Vector Summit combines the classic feel of a flint ignition with the power of a modern butane torch. Measuring 3.38" tall, 0.88" wide, and just 0.67" deep, this slim vertical design is perfect for everyday carry while still offering serious performance. Key Features Flint Ignition: Traditional spark-wheel design with modern torch flame Slim Vertical Build: Compact, portable lighter with a narrow profile Adjustable Flame Dial: Fingernail or screwdriver-friendly control at the base Stylish Finishes: Available in gunmetal or bold red matte Everyday Carry Ready: Lightweight and highly portable design Instead of electronic ignition, the Vector Summit uses a classic flint-style spark wheel — just flick the wheel to spark, and the butane torch ignites with a clean, blue flame. This makes it a unique option for anyone who enjoys the tactile feel of a traditional lighter but wants the performance of a modern torch. Sleek, stylish, and pocket-friendly, the Vector Summit is ideal for everyday carry or anyone who appreciates a lighter that blends classic design with modern function.

Read more less

Vector Speed Single Flame Torch Lighter The Vector Speed is a compact and powerful single flame torch lighter that delivers reliable performance with smart features in a stylish design. Measuring just 3" tall, 2.5" wide, and 0.75" deep, it’s easy to carry while offering the quality Vector is known for. Key Features Angled Flame: 45° flame output for more comfortable lighting Flame Lock: Hands-free operation with simple thumb control Fuel Gauge: Transparent window shows butane level at a glance Large Adjustment Dial: Quickly fine-tune flame size from the base Stylish Finishes: Available in vibrant colour fade or matte black The intuitive thumb ignition makes the Vector Speed one of the easiest lighters to use. Just press down on the built-in safety, ignite with a push, and lock the flame on with an upward slide for continuous use. Whether you prefer the sleek matte finish or the eye-catching fade pattern, this lighter is designed to look sharp and work flawlessly. Built for portability and performance, the Vector Speed Torch Lighter is an excellent choice for anyone seeking a reliable single flame torch that’s easy to use and maintain. With Vector’s reputation for quality, you can count on it for years to come.

Read more less

Vector Ultra Slim Single Flame Torch Lighter The Vector Ultra is a sleek, pocket-friendly torch lighter designed for everyday carry. Measuring just 2.4" tall, 1.36" wide, and only 0.45" deep, this ultra-slim design makes it one of the most compact single flame lighters available. Built from durable metal, it feels solid in the hand while staying light and easy to carry. Key Features Ultra-Slim Design: Just 0.45" deep for a discreet everyday carry Angled Flame: 45° flame output for easier, more comfortable lighting Simple Thumb Ignition: Push-to-the-side action with intuitive grip point Durable Metal Build: Satin rose gold or metallic speckled blue finish Adjustable Flame: Fine-tune with a coin or small screwdriver Operating the Vector Ultra is simple and intuitive. Rest your thumb on the raised grip near the top, push to the side, and the angled flame ignites instantly. The compact flame adjuster at the bottom lets you dial in the flame size for your needs. If you’re looking for a compact and stylish torch lighter that’s as slim as it is reliable, the Vector Ultra is a perfect choice. Sleek, discreet, and built to last, it’s ideal for anyone who values everyday carry performance without the bulk.

Read more less

Camouflet Super Capacitor The Ultimate Upgrade for XL Performance The Super Capacitor is the enhanced heating powerhouse for the Convector XL and Ceramo XL. Built from pure stainless steel and packed with quadruple the thermal mass, it delivers unmatched heat retention, increased extraction, and smoother sessions — even with a torch. Key Features: 100% Stainless Steel Construction – Designed for optimal induction compatibility and long-lasting durability 4x the Thermal Mass – Retains heat far longer for extended sessions and back-to-back hits without reheating Expanded Heating Matrix – More internal plates deliver deeper, more complete extraction Compatible with Convector XL & Ceramo XL – Plug-and-play with your existing Camouflet XL gear Forgiving Heat-Up – Easier for torch users with more margin for error and longer heat windows Why Choose the Super Capacitor? This is the biggest and most capable heater in Camouflet's lineup. Whether you’re just entering the battery-free vaporizer world or looking to push your XL rig further, the Super Capacitor gives you longer sessions, more consistent vapour, and higher extraction efficiency — all with less precision required. It’s a smoother ride with much more horsepower. Heat it with any source, but for best results, we recommend pairing it with Camouflet’s Inductor. Includes: 1x Super Capacitor Compatible With: Convector XL Ceramo XL

Read more less

Extra Large Chill Ice Cube Tray Set The ultimate ice solution for your Chill Steel Pipe. This custom-moulded tray is designed to create the largest possible ice cubes that will still fit perfectly inside your Chill Pipe — no wasted space, no compromises. Made Specifically for Chill Steel Pipes Each tray produces seven extra-large cubes engineered to match the internal dimensions of your Chill Pipe. That means you get maximum ice volume for a longer-lasting chill — keeping your water icy cold for up to 24 hours. Why Use This Instead of Regular Ice? Perfect Fit — No jamming or melting cubes to make it work Maximum Chill — Fills the pipe with ice for extended cooling Purpose-Built — Designed for your Chill, not your cocktail A Must-Have Accessory Using regular freezer ice just doesn't cut it. With this tray, you're always ready to load up your Chill Pipe with precision-sized cubes that perform better and last longer. It’s the easiest upgrade you'll ever make. What’s Included: 1 x Extra Large Ice Cube Tray (7 cube capacity) Made from durable, food-safe silicone Upgrade your Chill experience with the ice tray designed to match it — because Chill deserves better than standard cubes.

Read more less

Chill Lid & Plug Set Take your Chill Steel Pipe anywhere — without the mess. This custom lid and plug combo seals both ends of your Chill, making it 100% travel-ready and leakproof. Travel with Ice-Cold Confidence Whether you’re heading to a friend’s place or just out for the day, this set lets you pre-load your Chill with water and ice at home, seal it tight, and enjoy icy cold hits anywhere. It stays cold for up to 24 hours, so you’re always ready to chill on the go. Engineered for a Tight, Leakproof Seal Custom-designed waterproof plugs for both openings Keeps water locked in and spills locked out Built for mobility without sacrificing performance Pairs Perfectly With: Want the full mobile Chill setup? Use it with our Extra Large Chill Ice Cube Tray to pre-load your pipe with perfectly sized cubes before you head out. No melting mess, no hassle. What’s Included: 2 x Top Lid Plug 1 x Downstem Plug For Chill owners who like to keep it cold and keep it moving — this is your go-to upgrade.

Read more less

The Box by LidaVel — Electronic Vapor/Dab Cooling System Experience cooler, smoother hits — The Box by LidaVel is a premium electronic cooler designed to chill vapour or dabs without sacrificing flavor. Sorry, your browser doesn’t support embedded videos. Watch The Box in action — chilling your hits while preserving flavor. Overview The Box by LidaVel is built to cool your vapor or dabs using advanced electronic chilling technology. In just a few minutes, it transforms your sessions — reducing throat irritation, enhancing flavour, and delivering smoother inhale experiences. Ships from U.S. 🇺🇸 with fast service and dedicated support via SneakyPeteStore.com. Key Features Electronic Cooling: Cools in 2–5 minutes to maintain steady chilled output. 14mm Compatibility: Supports most vaporizers, rigs, and glass pieces with 14mm joints. Easy Maintenance: Removable glass cover and included cleaning tools. High-Quality Materials: German borosilicate glass, food-safe aluminum, and medical silicone. Elegant Design: Sleek, minimal, and built for performance and aesthetics. What’s Included The Box electronic cooling unit Glass cover (removable) 14mm Bowl XL Down stem Two hookah hoses (0.5m & 1m) 14mm adapters Cleaning corks Handle for hose Glass adapter Cleaning tools Power supply cord Tray/base Frequently Asked Questions How does The Box cool vapor and dabs? It uses electronic cooling technology to reduce vapor temperature quickly and consistently without compromising flavor. Is it compatible with all vaping rigs? It works with any device with a standard 14mm glass joint, including desktop vapes and dab rigs. How easy is it to clean? Very easy — the glass cover pops off, and the included tools let you do full maintenance in minutes. What’s it made from? Premium German borosilicate glass, food-grade aluminum, and medical-grade silicone for durability and purity. What warranty is included? It includes a 5-year service warranty for peace of mind with your investment. Final Thoughts If you want smoother, cooler, and cleaner sessions, the Box by LidaVel is one of the top cooling upgrades you can get. It brings advanced tech to your setup in a thoughtful, reliable package. Read our full review here.

Read more less

Glitterbomb – The Ultimate Indestructible Ice Bong Turn Heads. Hit Smooth. Never Break. Meet the Glitterbomb — a limited edition stainless steel bong that’s part art piece, part performance machine. With a stunning glitter finish and a construction built to last a lifetime, this is the kind of pipe you don’t hide in a drawer — you display it proudly and use it relentlessly. Unbreakable Design with Stainless Steel Power Made from double-wall, vacuum-insulated stainless steel, the Glitterbomb doesn’t just look incredible — it’s built to withstand anything. The interior features a patented ceramic lining for pure flavour and smooth vapour, giving you the taste of glass with none of the fragility. Limited Edition Glitter That Lasts The name says it all — this pipe explodes with colour. The glittering finish is fully sealed and protected, so it won’t fade, flake, or come off during cleaning. This is a true statement piece that’s made to be admired and used. Engineered for Icy Cool Hits Twist off the neck, drop in ice, add water, and enjoy the kind of cooling power only vacuum insulation can provide. The Glitterbomb keeps ice frozen for hours, giving you smoother, colder sessions without the constant refill. Pure Performance from Top to Bottom Every Glitterbomb includes a glass bowl and indestructible aluminium downstem, with a 14mm female joint that works seamlessly with most vaporizers and water pipe adapters. Food-grade silicone seals keep every hit clean and tight. Built for Daily Use. Designed to Last Forever. If you're tired of broken glass, weak cooling, or short-lived gimmicks, the Glitterbomb is your upgrade. Clean it like glass, use it like steel, and never worry about shattering your favourite piece again. Highlights: Limited edition glitter finish – fully sealed and protected Indestructible stainless steel body with double-wall insulation Patented ceramic interior for pure taste Compatible with vaporizers and 14mm adapters Comes with aluminium downstem and glass bowl Made to handle ice like a champ – cool, smooth, and clean The Glitterbomb is more than just durable — it's unforgettable. Whether you’re looking for your last bong ever or your most impressive one yet, this pipe delivers in every way.

Read more less

Tommy Chong x Chill Pipe – Limited Edition Paisley Collection Retro Vibes. Modern Chill. The Tommy Chong Limited Edition Chill Pipe – Paisley Collection is a tribute to cannabis culture, style, and one of its most legendary icons. Featuring bold bandana-inspired paisley prints in classic red or blue, this drop brings serious nostalgia with the rugged, high-performance design Chill Pipes are known for. Old-School Cool Meets New-School Engineering Behind the vintage paisley print is the Chill Pipe’s legendary stainless steel body — double-wall vacuum insulated to keep your ice colder, longer. The ceramic-lined interior delivers clean, flavour-rich hits with no metallic aftertaste, all wrapped in a bold, collectible shell stamped with Tommy Chong’s seal of approval. The Chill That Never Quits Twist off the top, load it with ice, and enjoy icy-smooth draws that last for hours. The durable steel build means no risk of breaking, and no babying required — this is a bong that’s built to use. Why You Want This Pipe Exclusive paisley artwork (Official Tommy Chong collab) in red or blue — loud, proud, and collectible 14mm female joint compatible with most bowls & vapes Glass bowl + indestructible aluminium downstem Food-grade silicone seals for a perfect, airtight fit Double-wall vacuum insulation – keeps ice frozen for hours Ceramic-lined interior – clean hits, no metal taste Ultra-durable stainless steel body – built to travel, built to last Easy to clean – just use isopropyl alcohol Whether you’re lighting up in the backyard or headed to the next sesh, the Tommy Chong x Chill Pipe delivers heavyweight chill with heavyweight style. Limited run. Maximum vibe.

Read more less

Rubberized Chill Steel Pipe – Rugged, Reliable, and Ready to Chill Built to Last. Designed to Perform. The Rubberized Chill Steel Pipe is an absolute beast — combining rugged durability with smooth, icy performance. Featuring a rubberized matte exterior that feels as solid as it looks, this water pipe is made to handle daily use, travel, and any adventure you throw at it. Whether you’re using it at home or on the go, it’s the definition of reliable. Rugged Finish. Pure Function. The rubberized coating adds extra grip and a tactical, stealthy look. This is a pipe you’ll want to use and not worry about. The tough exterior adds protection without compromising on style, and the internal construction is just as serious. Vacuum-Insulated Stainless Steel Core Inside the steel body, you’ll find double-wall vacuum insulation for unbeatable ice retention. Add to that the ceramic-lined interior, and you’ve got a bong that delivers clean, flavourful hits every time — no metallic taste, no compromise. Chill Hits Stay Cold Longer Twist off the neck, drop in ice, and enjoy hours of cool, smooth vapour. Thanks to the vacuum insulation, the Chill holds its temperature far longer than any standard glass bong — and with no risk of shattering along the way. Includes a Complete, Tough Setup Each Chill Steel Pipe comes ready to roll with a glass bowl and an indestructible aluminium downstem. The 14mm female joint works with your favourite vapes and adapters, and food-grade silicone seals keep everything tight and clean. Why Choose the Chill Pipe? Durable rubberized matte finish – extra grip, sleek look, rugged feel Unbreakable stainless steel body with double-wall insulation Glass-like ceramic interior for flavourful, pure draws Designed to handle ice and cold retention better than glass Includes aluminium downstem and glass bowl Low-maintenance and easy to clean with isopropyl alcohol When you want a bong that’s low-profile in colour but high-performance in function, the Rubberized Chill Steel Pipe is your go-to. Strong, subtle, and seriously satisfying — this is a daily driver with zero compromise.

Read more less

Mirror Chill Pipe – Limited Edition Stainless Steel Ice Pipe Sleek. Smooth. Unbreakable. Meet the Mirror Chill Pipe, a limited edition masterpiece that blends high-end function with polished perfection. Featuring a striking mirror finish and indestructible stainless steel construction, this is more than a pipe — it’s a statement. Built to perform, built to last, and built to turn heads. Unbreakable by Design, Cool by Nature Crafted from double-wall, vacuum-insulated stainless steel, the Mirror Chill Pipe is engineered for everyday use with zero compromise. Inside, a patented ceramic lining delivers the clean, smooth taste of glass — without the risk of ever breaking it. Striking Mirror Finish – Built to Shine The high-gloss, mirror-polished exterior isn't just for looks — it’s sealed and protected to resist scratches, stains, and wear. This pipe doesn’t just sparkle out of the box; it stays flawless with every use and clean. Engineered for Ice-Cold Rips Twist off the top, drop in ice, and let vacuum insulation do the work. The Mirror Chill Pipe keeps ice solid for hours, delivering colder, smoother hits than traditional glass — without the hassle of constant refills. Serious Performance, Seamless Compatibility Each Mirror Chill Pipe includes an ultra-durable anodized aluminium downstem and glass bowl, with a 14mm female joint that pairs easily with most vaporizers and water pipe attachments. Food-grade silicone seals ensure every hit is tight, clean, and satisfying. Built to Be Your Forever Piece Tired of fragile glass and gimmicky designs? The Mirror Chill Pipe is your upgrade — sleek, strong, and made to go the distance. Easy to clean, impossible to break, and beautiful enough to display. Highlights: Limited edition mirror-polished finish – sleek and scratch-resistant Vacuum-insulated stainless steel body for extreme durability Patented ceramic interior delivers pure flavor Compatible with 14mm vaporizers and water pipe adapters Includes glass bowl and anodized aluminium downstem Engineered for long-lasting ice retention and ultra-cool hits The Mirror Chill Pipe is more than a pipe — it’s a legacy piece. If you’re ready to own the last pipe you’ll ever need, this is it.

Read more less

Portable, Natural Cleaning Method ​Introducing Pink Slips, the innovative, plant-based all-purpose cleaner designed to rejuvenate your glass, ceramic, and metal items with ease. Harnessing the natural power of Himalayan pink salt, Pink Slips offers a gentle yet effective cleaning experience without the use of harsh chemicals.​ Key Features: Versatile Cleaning: Suitable for a wide range of materials, including glass, ceramic, and metal, making it ideal for cleaning items like bongs, pipes, and other accessories.​ Eco-Friendly Composition: Crafted from plant-based ingredients and infused with Himalayan pink salt, ensuring a non-toxic and environmentally conscious cleaning solution.​ Compact & Portable: Packaged in a small, convenient cardboard box containing five sheets, Pink Slips can easily fit into your pocket or bag, making on-the-go cleaning a breeze.​ How to Use Pink Slips: Prepare the Solution: Place a Pink Slip into your bong or a plastic bag containing your small glass items.​ Add Hot Water: Pour hot water into the bong or bag, ensuring the cleaning material is fully dissolved.​ Soak: Allow the items to soak for up to 30 minutes. For stubborn stains, extending the soak time or leaving it overnight is safe and effective.​ Rinse: After soaking, rinse the items thoroughly with warm water to reveal a pristine, clean surface.​ Economical Usage: Each sheet is designed to provide up to two cleaning sessions. For smaller items or less stubborn stains, simply tear a sheet in half to maximize usage, offering up to 10 cleans per package.​ FAQs About Pink Slips: Q: Can Pink Slips be used on materials other than glass, ceramic, and metal? A: While specifically formulated for these materials, Pink Slips may be suitable for other surfaces. However, it's recommended to test on a small, inconspicuous area first.​ Q: Are there any scents or fragrances added to Pink Slips? A: No, Pink Slips are free from artificial scents and fragrances, ensuring a neutral cleaning experience.​ Q: How does Pink Slips compare to traditional isopropyl alcohol and salt cleaning methods? A: Pink Slips offer a convenient and portable alternative to traditional methods. While they effectively clean your items, for heavily soiled pieces, a more intensive cleaning session with isopropyl alcohol and salt might be appropriate.​ Q: Is it safe to soak items overnight in the Pink Slips solution? A: Yes, soaking items overnight is safe and can be beneficial for removing stubborn stains without harming your pieces.​ Q: Are Pink Slips environmentally friendly? A: Absolutely. Pink Slips are made from plant-based ingredients and packaged in recyclable materials, aligning with eco-friendly practices.​ Experience the convenience and effectiveness of Pink Slips, and keep your accessories looking their best with minimal effort.​

Read more less