Crossing Heated Dab Tool (Hot Knife)
Load clean. Drop clean. No mess.
The Crossing Heated Dab Tool is the easy way to load sticky concentrates into your wax pen or e-rig without scraping the sides of the bowl. A ceramic hot-knife tip, three voltage levels, and simple one-button controls let you warm and release your dab with precision. It’s compact, USB-C rechargeable, and comes with a protective cap for pocket-safe carry.
Key Features
Heated ceramic tip for smooth, mess-free loading
3 voltages (Blue / Green / Red) to match different concentrate textures
Two heat modes: quick cycle (double-click) or manual hold
USB-C charging with included cable
Protective cover cap for safe storage
550 mAh battery for plenty of reloads between charges
One-button operation—fast to learn, easy to use
Why You’ll Like It
Less mess: Warm the tip and your dab slides cleanly into the chamber—no more hard scraping.
Better control: Choose a lower level for softer waxes or higher for firmer concentrates like shatter.
Pocket-friendly: Lightweight, capped, and ready to travel.
How to Use the Crossing Heated Dab Tool
Remove the glass/plastic cap.
Power on: Press the button 5× to turn on (repeat to turn off).
Select voltage: Press 3× to cycle Blue → Green → Red.
Heat the tip:
Quick cycle: Press 2× to start a short auto heat.
Manual: Press & hold to heat while you load.
Scoop your concentrate, hover over the chamber, then warm the tip—after a few seconds the dab will slide offcleanly.
Replace the cap when finished and power off.
Tip: Use Blue/low for most waxes; bump to Red/high for firmer textures.
Battery & Charging
The integrated 550 mAh battery delivers many reloads per charge. Top up with the included USB-C cable. As with any small device, actual run-time will vary by heat level and usage.
Easy Cleaning
While the tip is still warm (not red-hot), wipe it with a vape-safe cleaning wipe to remove residue. Keep the protective cap on during storage to extend tip life and prevent debris.
Specifications
Tip
Ceramic heated “hot-knife” style
Heat Levels
3 voltages (Blue / Green / Red)
Controls
1 button • 5× power • 3× level • 2× cycle • hold to heat
Battery
550 mAh (integrated)
Charging
USB-C
Cap
Included protective cover
Use Case
Loading wax pens & e-rig chambers
What’s in the Box
Crossing Heated Dab Tool (Hot Knife)
Protective tip cover
USB-C charging cable
Owner’s manual
FAQs
Which heat level should I use?
Start on Blue for softer waxes. If the dab doesn’t release cleanly, step up to Green or Red for firmer concentrates like shatter.
How do I keep the tip clean?
Wipe the tip while warm with a vape-safe cleaning wipe every few sessions. Avoid scraping with metal tools.
Will it work with my wax pen or e-rig?
Yes—this tool is brand-agnostic. It simply helps you transfer concentrates cleanly into most chambers.
Is there an auto shut-off?
The quick-cycle heat runs for a short, pre-set interval. Always power off when finished and replace the cap.
Safety Notes
The tip gets hot—keep away from skin, fabrics, and flammables.
Allow the tip to cool before capping or cleaning.
Charge with a quality USB-C cable and reputable power source.
Store capped, out of reach of children and pets.
Cobra Caddy: The Ultimate Accessory for Your DC Cobra Enail
Take your dabbing setup to the next level with the Cobra Caddy, the perfect companion for your DC Cobra Enail. Designed to keep your sesh organized and hassle-free, the Cobra Caddy offers dedicated slots to hold bangers, carb caps, marbles, and all your essential accessories. Crafted with the same 3D printing technique as the enail system itself, the Cobra Caddy not only matches perfectly but also enhances the overall aesthetic of your setup. Once you've experienced the convenience of the Cobra Caddy, you'll wonder how you ever managed without it.
Perfect Fit for Your DC Cobra Enail
The DC 25mm Quartz Banger is designed to be the ideal match for your DC Cobra Enail system. With a 25mm diameter, it seamlessly fits into the system’s coil, ensuring a smooth and consistent experience every time.
Versatile for Traditional Use
For those who appreciate the classic approach, this banger is perfect. It works effortlessly with a traditional torch or any other 25mm enail system, offering versatility without compromising quality.
Built to Last
Crafted from high-quality quartz, this banger is made to withstand years of use. Its durable construction ensures longevity, making it a reliable addition to your concentrate setup.
Features:
Beveled Edge: Provides a snug seal for enhanced performance.
2.5mm Thick Wall: Offers durability and heat retention.
4mm Thick Bottom Puck: Ensures even heat distribution.
Deep Bucket: Accommodates larger dabs with ease.
Frosted Joints: For a secure and stylish connection.
Low Profile Neck: Designed for a sleek and ergonomic experience.
14mm Male Connection: Works with 14mm female water pieces.
The Peak Pro 3D XL Chamber for the Heavy Hitter
Most of us who do dabs do them for one crucial reason: they get you messed right up in a hurry. Puffco always loves pulling a Spinal Tap and turning things up to 11, and based on analytical market research, they decided people who love the Peak Pro and New Peak Pro truly love that second level of effectiveness. Well, it’s time for a third tier. Introducing the Peak Pro 3D XL Chamber, a truly impressive dab chamber that is like nothing you’ve experienced before. Ripping like you’ve never ripped before, the XL Chamber converts your Peak Pro into a true heavy hitting rig.
Turn Your Peak Pro into a Large Capacity Device
This XL Chamber is 78% larger than the included chamber and adds the first high-capacity e-rig chamber in the market to one of their most popular devices for heavy hitters, the Peak Pro. With the additional size and volume, your New Peak Pro can easily go toe to toe with traditional bangers and even enails. In our testing, the XL Chamber doubled the vapour we were producing with the standard bowl.
Size and Fancy Tech to Boot
The XL Chamber echoes the technology you’ll find in the standard 3D Chamber as well; the walls of the ceramic chamber heat up to provide the most efficient heating, now super-sized. Included with the XL Chamber, Puffco provides their XL Joystick Cap that lets you direct the airflow in the chamber to achieve optimal efficiency while looking cool and having fun.
The Side Effect to Size is Cleanliness?
As the bowl is deeper, surface area is increased and thus you’ll get less reclaim left over in your e-rig, providing a much cleaner overall experience. The entire experience is customizable through the Puffco Connect app to push it to the limits, Scarface style.
Chances are you’re doing dabs for a reason, and believe us, the Puffco Pro 3D XL Chamber will help you get there and faster. For all you heavy hitters out there, this is a must buy upgrade, and for everyone else, it will ease your cleaning experience as well.
Proxy Replacement Chamber
Puffco makes killer gear, and we’ve never worried about any sort of malfunctions and what not, but the problem with breaking things is that the problem usually lies between the table and the device. Hey, we’re all human! The Puffco Proxy 3D Chamber is available as a replacement part for your Proxy.
Heats The Walls For Maximum Efficiency
These aren’t third party knockoffs; the 3D Chamber is an OEM part that is identical to the Chamber that came with your Proxy in the first place. A breakthrough in concentrate heating technology, the walls of the ceramic bowl are embedded with heating tracers to help achieve a full vaporization by heating the walls of your chamber while you’re inhaling. If you aren’t inhaling, the oil will slide down and rest in the bottom preserve the quality and integrity of your oil.
Get That New Vape Feeling
Whether you’re replacing a part because of an accident or just to achieve that “as new” feeling, the Proxy 3D Chamber offers better consistency, a smoother hit and enhanced flavour on top of being incredibly efficient.
Make Your Proxy Even Better
One of the best things about the Puffco Proxy is its portability, but its included traveling option isn’t ideal, and the base device is a little void of accessories. Puffco designed the Puffco Proxy Travel Pack to maximize the portability of the device while also including more room for accessories, and the Proxy looooooooves accessories.
A Flat Bottom To Sit On A Table
The Travel Pack includes a suite of accoutrements that are all designed to enhance your experience with your Proxy, even when you’re using it at home. One of the enhancements is the Silicone Backpack, the new base for your Proxy to rest on. It features a flat bottom that will sit on any surface, as well as a storage section to fit swabs that make it easy to keep things clean on the go.
The Ball Cap Increases Performance
The Proxy Ball Cap enhances the Oculus Carb Cap by adding directional airflow for maximum performance and optimum efficiency. They also include the Proxy Ball Cap Tether to attach the Ball Cap to the Proxy Base, so it’ll always be where you need it.
Silicone Mouthpiece Helps To Protect
Lastly, the Silicone Mouthpiece both protects the glass tip from minor bumps and bruises while also providing a more sanitary option that you’ll appreciate while using with friends. The Puffco Proxy Travel Pack is a massive upgrade for your Proxy across the board and you’ll love the options this kit provides.
The Quartz Deep Dish 2-pack includes two high quality Quartz Dishes designed for use with the MiniNail Hybrid Nail enail. This dish pack will work with ANY MiniNail Hybrid Nail style. Easy to install, replace, and clean.
'Optimal vaporization' are the key words with the MiniNail Quartz Banger. The MiniNail delivers low and consistent heat to the banger, which then delivers more of your concentrate to you. No 'pooling then cooling' as can happen with a torch; just great vaping with smooth rich flavor. The custom designed 5mm thick quartz base and sturdy quartz walls retain heat beautifully, especially at lower temperatures. 5mm extra thick base for better heat retention, 14mm male connection, includes silicon band for optional fastening.
Must-Have MiniNail Accessory
Get the perfect heating setup with MiniNail's Gen 2 Heater Coil Stand. Designed to hold your Quartz Banger, Hybrid Nail or Heater Coil securely so you can elevate your dabbing experience, while keeping things safe. Crafted from high-grade polished stainless steel and available in a beautiful gold finish, the MiniNail Heater Coil Stand also features a slot for storing useful accessory tools like dabbers close to the action, this stand is an essential companion of any MiniNail eNail set up.
Store Your MiniNail Safely
Storing your hot MiniNail on a stand like this is preferable for many users as compared to leaving a hot MiniNail on their favourite water piece, and this is the perfect place to store your MiniNail setup with your most used accessories right where you need them. The Coil Stand is priced right and will soon find a permanent place in your setup.
The Cadillac of E-Nails
The MiniNail is designed, engineered, assembled and packaged in the USA. It’s built to premium quality standards using only first-class materials, including third party tested pure titanium. The setup is small enough to go with you anywhere, but it’s heavy-duty enough to be your desktop daily driver. The MiniNail runs at very low power, about 20% of a normal e-nail, meaning it is cheaper to operate, very safe, and it will last longer than other e-nails. The manufacturer stands behind the MiniNail with a 2-year warranty on both the power/control box and the heating coil, something that’s almost unheard of in this industry. There is a very accurate digital temperature display, and the ideal range is 400 to 600°F, but it can go up to 1,000°F to do burn off cleanings.
Ready to Plug In and Go
Each kit includes a MiniNail power control box of your color choice and a hybrid coil heating element. One kit comes with a premium quartz E-banger and includes a glass carb cap and dabber. The other kit has a hybrid quartz/titanium universal nail with a multi-tip dabber/carb cap tool and two quartz dishes (titanium dish no longer included). Both include a 6' power cord and silicone dab mat.
Our Go To Concentrate Solution
Winner of our 2019 Vape Award for concentrate product of the year, the MiniNail is our daily driver for concentrates, and it'll soon become yours too!
