When you want extra cooling for your Puffco Peak Pro or Peak, the Bent-Neck Peak Pro Top is your ticket. The Pro Top holds a massive volume of water compared to the stock piece, and it will make every hit much cooler, while also adding additional filtration.
The Bent-Neck Peak Pro Top is the perfect upgrade from the original water attachment of either Puffco Peak device. It’s sized to fit directly onto your Pro or Classic base and has an effective percolator that holds more water, effectively cooling those monster rips that the Peaks are known for.
Another advantage of this piece is the drawn out and bent neck. Compared to the straight opening in the top of the original model, the bent neck design more naturally matches the angle you use when operating the Pro or Classic, so it's much more comfortable - plus the bend helps to eliminate any accidental drinking.
The mouthpiece is flared and worked for a more natural feel. The glass is thick, durable, and attractive, complementing the Peak’s sophisticated design. The Bent-Neck Peak Pro Top is a true upgrade.
If you’re looking for a way to bring the effectiveness of water cooling to your Arizer vape without the water, look no further than the Arizer Coil Stem. Vapour will travel through over 12” of coiled cooling glass before it reaches your appreciative respiratory system, this is more than twice as long as the standard Arizer stem so it provides a lot of extra cooling.
The Coil Stem also includes a carb hole, placed far away from the mouthpiece to keep your finger cool. By covering the carb, you can increase the draw resistance and the extraction speed, and once you've finished your draw you can use the carb to clear the stem. You can also leave it open to allow more airflow for a freer draw and cooler vapour.
Featuring a permanent glass screen for easy maintenance, the Coil Stem also has legs so it can sit on a table without rolling away. Add the Arizer Coil Stem to your Air 2 or Solo 2 for pristinely cooled vapour today!
The LittleFinger Adapter is the easiest, cleanest, and most convenient way to use any DynaVap tip with a waterpiece. With its universal 10, 14, or 18mm male joint, the LittleFinger truly does adapt to whatever your needs are. Two wide glass bands provide extra durability while also allowing you to set the unit down when it's hot, as it holds the tip suspended in the air rather than laying it on the table. Plus, it's enjoyable to watch the vapor travel through the glass.
Fun, versatile, and super convenient. Get cooling hydration combined with the purity of glass with the LittleFinger Adapter.
The Crafty+/Mighty+ Mini Bubbler fits snugly on either device and comes with a soft silicone base. The bubbler delivers cooling hydration to your vape hits, while being small and discrete enough to take with you on-the-go, or keep out of sight at home. A screen on the bottom of the Mini Bubbler is designed to prevent flower from getting into the water piece, keeping the experience clean and pleasant. The Crafty+/Mighty+ Mini Bubbler is well built, and will elevate your vaping experience with cool, water-conditioned vapour.
Works with the Crafty, Crafty+, Mighty, or Mighty+ by Storz & Bickel.
Use 10mm Vapes with 14mm Glass Simply
Bring harmony to your vape setup with this versatile adapter. This low profile adapter is the super easy way to turn your 14mm female joint into a 10mm female. It allows you to hook up your favorite 14mm female water piece to a 2020 DynaVap M, or any other 10mm male vaporizer or accessory, and you're all set. This low profile adapter will not add any height, is barely noticeable, and fits snugly. Bring flexibility to your vaping rig: Adapt!
If low profile isn't your thing, we offer a traditional version as well. Same quality, same functionality, different height.
Complete your V.A.S. (Vaporizer Accessory Stand) with a Round Top or Flat Top Glass Stopper. Made from borosilicate glass, the Glass Stopper allows you to fill the reservoir arm with isopropyl alcohol and will prevent the alcohol from evaporating. Isopropyl alcohol is the ultimate cleaning solution for all of your vapes and accessories, so keep it close at hand at all times. Vape enthusiasts know the V.A.S. is the perfect accessory for all of your desktop organizational needs, and the Glass Stopper will give even more utility to your setup.
The Maraca Glass Stem combines many different cooling elements in one piece that’s convenient and comfortable to hold and use. The tip end is sized to fit any stainless steel or titanium DynaVap tip, and The Maraca Stem’s glass it thick and durable. Behind the tip is a shotgun carb to clear the entire stem with a massive rush to the head. After the carb is a restriction point followed by an expansion chamber, causing even more cooling. The chamber contains three glass beads to further condition and cool the vapor, and it's enclosed at the back end by a pinch point with three pokes. Finally, three glass nipples agitate the vapor completely before ending at the mouthpiece, much cooler and cleaner than when it left the tip.
On top of everything else, it can double as a musical instrument. Name another DynaVap stem that can do that 😉
Key Features:
- Clear glass w/red glass beads- 85mm length- Fits any DynaVap tip- Shotgun carb at tip end- Glass beads agitate and filter vapor- Restriction point/expansion chamber adds cooling- Glass nipples finalize conditioning and complete cooling
The Bent-Neck Carta Top is the perfect replacement and upgrade for its factory water attachment. It’s sized to fit directly onto your Carta base and has the same percolator and water volume to cool those monster rips the Carta is known for. This piece’s advantage is having the neck stretched and bent at an angle, so it’s not just a straight opening in the top like the original model. The bent neck design more naturally matches the angle you use when dabbing with the Carta, so it's much more comfortable, plus the bend helps eliminate any splashing. The mouthpiece is flared and worked for a better feel and the borosilicate glass is thick and durable, complementing the Carta's rugged design.
This Sidestep Adapter is sized 14mm with a male joint at one end and a female joint at the other. There isn’t much vertical difference between the joints, but it moves the connection about 3.5” off to the side of the Mega Globe, so now your vapes and bangers won’t sit directly on your rig itself. Sidesteps are handy to catch debris and reclaim, keeping your water piece cleaner. You’ll also protect your Mega Globe (or another piece, it fits any 14mm rig) from being in direct contact with vapes or hot bangers. Keep your investment safe and save time on maintenance with our Sidestep Adapter for the Mega Globe.
The Aristocrat Stem introduces extra length and sophistication to your DynaVap set-up. Measuring in at an extended 90mm length, the Aristocrat Stem is easier to handle for large hands and also offers some additional cooling. Available in seven striking colors, add the purity of glass and a fancy look to your DynaVap.
* DynaVap Tip NOT included.
Key Features:
- Extended 90mm length- Works with any DynaVap tip- Add the purity of glass to the DynaVap- Does not have a carb hole- Available in seven different color options
*Also works perfectly with the Healthy Rips Fury Edge
The Strong-Arm DynaVap Adapter V2 will allow you to use your DynaVap Tip directly with a water pipe! Simply place a DynaVap Tip into the Strong-Arm and you're ready to hit your DynaVap through a 10mm, 14mm, or 18mm female water pipe. This is the easiest and most convenient way to use your DynaVap through a water pipe, and your vapour will touch nothing but the purity of glass.
Please be gentle and twist the tip into the adapter when inserting, glass stems need a higher degree of care than metal stems.
Key Features:
- Works with 10mm, 14mm, or 18mm female water pieces- Enhanced tighter fit- Approximately 3" in length
Do not over-tighten the adapter onto your vaporizer! It only needs a slight/eighth turn, over-tightening will damage your vaporizer.
This water pipe adapter is designed to fit Crafty and Mighty vaporizers to take your vaping to the next level. Plumb in a water pipe to your vape set-up for cooler vapour, concentrating it through percolation for larger and cloudier hits. The adapter comes in 14mm and 18mm male vaporizer joint variations, and connects universally to 10mm, 14mm, and 18mm female water pieces.
Easy to install, simply remove the cooling unit on your vaporizer, then line up the slots on the adapter with the holes on your device. Very slightly twist the adapter to secure it; an eighth turn will make it completely secure. Be sure not to twist the adapter too much! Over-tightening will damage your vaporizer.
Once the adapter is secured, attach your modified vaporizer to your water pipe of choice and enjoy fresh water hits. Highly recommended for Crafty and Mighty users for a superior vape experience.
Key Features:
- Compatible with Crafty, Crafty+, Mighty, or Mighty+ vaporizers- Durable plastic housing contains borosilicate glass for a pure vapor path- Replaceable screen included- Easy to assemble - Available with a 14mm or 18mm male vaporizer joint- Universally adapts to 10mm, 14mm, and 18mm female water pieces
The 3D Flow Stem features striking and functional divots throughout the length of the stem to increase the surface area your vapor passes over. The increased surface area allows for more cooling of the vapor, resulting in a smoother draw. The divots do not affect the airflow in any way, and the stems provide a clear draw for large and cool hits.
Key Features:
- Compatible with the Arizer Solo 2/Air 2- Divots are visually striking and functional- The increased surface area provided by the 3D divot design allows for cooler vapor and better draws than a traditional stem- Great airflow, easy to clean- Durable glass construction
Glass it up! Add this optional glass mouthpiece to your Sneaky Pete Globe (or replace the one that comes with the Mega Globe) for a next level experience. The mouthpiece is small and lightweight, with great lip-feel and reduced draw resistance compared a whip.
Key Features:
- 4.25" length- Ends in a 14mm male joint- This mouthpiece can also be used with the Magic Flight Orbiter
The Buzz features a honeycomb percolator for maximum bubble production. The filtration that takes place on this device is massive, don't let its sleek size fool you. This unit also features glass bolsters on all joints for maximum strength. The versatile 14mm female joint will work with a variety of adapters, nails, and vape pens.
Key Features:
- The Buzz stands approximately 9" tall- Features the ever popular 14mm female joint- Wide and stable base, will hold even large vaporizers- Glass bolsters provide stability and durability- Honeycomb percolator provides massive bubbling and water conditioning- Great lip feel on the mouthpiece, a pleasure to use
