DynaVap Accessories & Replacement Parts

Cap Armor — Stainless Steel Sleeve Upgrade for DynaVap Captive Caps More mass. More heat retention. More power — without replacing the cap you already love. Cap Armor is a precision-machined stainless steel sleeve designed to snap over a compatible DynaVap Captive Cap, adding serious thermal mass and heat retention to your setup. Think of it as a modular alternative to an Armored Cap: you keep using the cap you already trust, but you gain a smoother, more consistent heat cycle and a noticeable bump in extraction performance. The big quality-of-life upgrade is heating. With the added mass surrounding the cap, heat spreads more evenly through the sleeve, so you can point your torch and heat without constantly spinning your device. That means less technique, less hot-spotting, and an easier path to repeatable results—especially for anyone chasing that “one-hit” style extraction. In real-world use, Cap Armor helps push your DynaVap toward full extractions in 1–2 heat cycles with less guesswork. Because it’s modular, Cap Armor can be installed or removed whenever you want. It’s not difficult to take on and off, but if you plan on using it daily, many users prefer dedicating one to each cap in their rotation. It’s inexpensive, it’ll last forever, and it’s one of those upgrades that just makes the whole DynaVap experience easier and more effective. Features Modular performance upgrade: Precision-machined stainless steel sleeve that clicks onto compatible Captive Caps to add mass instantly. Enhanced heat retention: Added thermal mass smooths heating, extends cycles, and improves thermal consistency. No-spin heating: More even heat spread means you can aim the torch and heat without constant rotation. Stronger extractions: Helps achieve full extraction in 1–2 heat cycles. Microdose friendly: Still works with the DynaVap half-bowl setting for extremely efficient small loads. Built to last: Stainless steel construction designed for years of daily use. Compatibility Compatible with: Captive Caps in good condition Not recommended for use with: Non-Captive Caps, dented caps, PVD-coated caps, or Special Edition engraved caps How to Use Install: With your Captive Cap on an assembled device, gently press the cap into Cap Armor until you hear an audible click. Remove: While the cap is installed on a tip, brace your thumb on the digger-outer against the tip, then gently wiggle and pull Cap Armor off. Do not push from the top to separate—this may dent the cap. Notes Because this is a press-fit design, minor dents or impressions on the upper crimp of the Captive Cap are possible. This is normal and will not affect function of either part. Sneaky Pete Vaporizers — U.S. source for DynaVap parts, performance upgrades, and accessories. Read our full in-depth review of Cap Armor Upgrade for DynaVap: More Heat Retention, Less Technique, Better Results here.

Read more less

YLL Silicone Adapter & Glass Tube Set — Perfectly Straight DynaVap Heating A custom silicone adapter and glass tube set for the YLL IH 3.0, designed to hold your DynaVap perfectly straight for cleaner, easier, more consistent heating. See the YLL IH 3.0 in action. Overview The YLL Silicone Adapter & Glass Tube Set is a simple upgrade that dramatically improves your experience with the YLL IH 3.0. The stock glass tube and silicone works, but it isn’t designed specifically for DynaVap. Your tip tends to sit on an angle, wobble slightly, or need to be manually centered. This custom adapter set fixes all of that. The silicone insert is sized specifically for DynaVap, so your tip sits perfectly straight and centered every single time. That means easier, more consistent heating, and a cleaner, more predictable workflow. Key Features Built for DynaVap — optimized to hold your DynaVap straight in the YLL IH 3.0. No more wobbling — fixes angled placement and ensures a repeatable heating position. Custom silicone adapter — grips the glass and stem securely while remaining easy to remove. Matched glass tube — sized to work with the adapter for a perfect fit. More consistent roasting — straighter alignment = more even heat around the cap. Supports standard caps — ideal for regular DynaVap caps in the YLL IH 3.0. How It Improves the YLL IH 3.0 The YLL IH 3.0 is powerful and flexible, but the default tube isn’t tuned specifically for DynaVap stems. This can lead to: Uneven heat distribution around the cap Mild hot spots or inconsistent extractions Needing to hold the stem manually to straighten it With this silicone adapter & glass tube combo, your DynaVap drops into the exact same straight position every time. You get more reliable clicks, smoother extractions, and a relaxed, hands-free heating experience. Compatibility This accessory is designed for: YLL IH 3.0 induction heater Standard DynaVap Caps and stems Oversized or specialty caps may not seat as cleanly, but standard caps fit perfectly. Final Thoughts If you're using your YLL IH 3.0 primarily with DynaVap, the YLL Silicone Adapter & Glass Tube Set is an inexpensive, high-impact upgrade. Straight alignment means better flavor, better consistency, and a smoother workflow every time you heat your cap. Sneaky Pete Vaporizers — your US source for YLL IH 3.0 accessories and DynaVap upgrades.

Read more less

YLL DynaVap Decapper Stand — Hands-Free Cap Removal A compact metal decapper stand with a strong magnet, designed for smooth, hands-free removal of any DynaVap cap — including HyperDyn and Armored caps. Overview The YLL DynaVap Decapper Stand makes removing a hot DynaVap cap fast, safe, and effortless. Just place your cap onto the magnet, give it a gentle lift or twist, and the stand takes care of the rest — no burned fingers and no awkward juggling. It’s built from durable metal with a routed groove sized for all DynaVap tips, ensuring stable placement whether you’re using a standard cap, HyperDyn, or the heavier Armored Cap. Key Features Hands-Free Decapping — remove hot caps instantly with a smooth lift or twist. Strong Center Magnet — grips any DynaVap cap securely, including large and heavy styles. Precision Metal Build — durable, stable, and cut with a groove to hold the device firmly. Compatible with Every DynaVap Cap — standard, HyperDyn, Armored, and specialty caps. Great for Faster Reloads — cools caps quicker and improves session flow. Why Use a Decapper Stand? If you've ever tried to remove a hot DynaVap cap with your fingers, you know why this accessory exists. The Decapper Stand solves three common problems: Hot caps that stay warm for longer — especially HyperDyn and Armored caps Unstable surfaces when trying to cool or remove a cap Interrupted session flow while waiting for safe handling temperatures A decapper lets you lift the cap the moment you’re done heating, giving you quicker cooldowns and faster reloads every time. Compatibility Works with all DynaVap caps, including: Standard Caps HyperDyn Cap Armored Cap Compatible with every DynaVap tip and stem style. Final Thoughts The YLL DynaVap Decapper Stand is one of those small upgrades that instantly improves the way you use your DynaVap. With a strong magnet, clean metal construction, and full compatibility with all caps — even the big ones — it’s a simple tool that makes every session smoother, safer, and more enjoyable. Sneaky Pete Vaporizers — premium DynaVap accessories shipped fast across the USA.

Read more less

Upgrade Your DynaVap: The BallR Cap for Enhanced Convection Vaping Transform your DynaVap into a powerful ball vape with the BallR Cap—a revolutionary upgrade designed for better flavour, improved heat retention, and a pure convection experience. What Is the BallR Cap? The BallR Cap is an extended-length cap that works with any standard DynaVap tip. Inside the top portion, stainless steel balls absorb and retain heat from your torch or induction heater. When you inhale, the stored heat washes over your flower, providing a true ball vape experience with increased power and efficiency. Why Upgrade to the BallR Cap? Full Convection Heating: Unlike traditional DynaVap caps, which rely heavily on conduction, the BallR Cap shifts your vaping experience to pure convection. Heat is retained in the stainless steel balls and only released when you inhale, maximizing flavour and efficiency. Stronger, More Potent Vapour: By eliminating preheating of your flower, terpenes and volatile compounds remain intact until inhalation, ensuring better flavour and stronger effects. Improved Heat Retention: The stainless steel balls act as a heat reservoir, allowing for more consistent, powerful draws. Universal Compatibility: Works with any standard DynaVap tip, making it an easy upgrade for any DynaVap user. How to Use the BallR Cap Attach the BallR Cap to any standard DynaVap tip. Heat the cap using a torch or induction heater until it clicks. Inhale for a smooth, convection-powered vaporization experience. Enjoy the improved flavour, efficiency, and vapour density. FAQs About the BallR Cap Q: Will this fit my existing DynaVap setup?A: Yes! The BallR Cap is compatible with any standard DynaVap tip, making it a seamless upgrade. Q: How is this different from a regular DynaVap cap?A: Unlike a standard cap, the BallR Cap uses stainless steel balls to retain heat, shifting the device to true convection vaping. Q: Does this work with induction heaters?A: Yes! The BallR Cap works with both torch and induction heating, although performance is optimized for specific induction heaters like the Wand. Q: Is this more efficient than a regular DynaVap cap?A: Yes! Better heat retention means you extract more from your material with less waste, making your sessions more efficient and flavourful. Why Choose the BallR Cap? Enhanced Vapour Quality: Stronger, smoother, and more flavourful convection vapor. Budget-Friendly Upgrade: Affordable price for a game-changing enhancement. Versatile & Durable: Works with any standard DynaVap tip, built to last. Optimized for Induction & Torch Heating: Best performance with The Wand heater. Elevate your DynaVap experience with the BallR Cap—the most accessible way to enjoy the power of ball vapes in a portable format.

Read more less

Sleek and Eye-Catching Design The titanium DynaVap Halo Tip features a stunning multi-finned look that tapers down toward the stem, offering a visually striking profile while improving performance. Optimized Mass Distribution for Full Hits Designed with excellent mass distribution, the Halo Tip allows for full, satisfying hits while keeping the heat concentrated in the tip, ensuring a cooler experience at the stem. Perfect for Microdosing The improved half-bowl option makes this tip ideal for microdosing. With up to 20 hits per gram, you can maximize your material's efficiency by simply placing your CCD in the snug half-bowl setting. Secure Fit with Minimal Components With only two o-rings, the Halo Tip provides a perfectly secure fit every time. Easy to assemble, it’s designed for convenience and durability. Crown-Shaped Top for Easy Loading No grinder needed! The crown-shaped top allows for easy loading directly from your bud, making this tip as practical as it is stylish. Fully Compatible with DynaVap Accessories The DynaVap Halo Tip works seamlessly with all DynaVap midsections and standard-size caps, ensuring compatibility across your favourite setups.

Read more less

Experience a New Level of Vaping The Hyper Cap is DynaVap's innovative "big bowl" Cap, designed exclusively for use with the Hyper Tip. Together, this cutting-edge Cap & Tip combo delivers an entirely new vaping experience, perfect for enthusiasts seeking more intense sessions. This duo is engineered to provide massive rips and satisfy connoisseurs who crave a more "session-style" DynaVap experience. Key Features Advanced Titanium Cap: The Hyper Cap is precision-machined from titanium, seamlessly connecting to the Hyper Tip without threads, utilizing DynaVap’s renowned Captive Cap technology. Adjustable Airflow: Tailor your draw to your exact preference with adjustable airflow, thanks to the precise connection between the Hyper Tip and Hyper Cap. Optimal Heating Indicator: Engineered to "click" at the perfect vaporization temperature, the Hyper Cap ensures a personalized, controlled session every time. Sleek and Durable Design: The Hyper Cap boasts a clean, scratch-resistant appearance due to DynaVap’s proprietary DuraDyn technology. Its durable titanium construction guarantees long-lasting performance. Important Note: The Hyper Cap is compatible only with the Hyper Tip.

Read more less

Time To Elevate Your Vaping Experience The Hyper Titanium Tip is DynaVap's revolutionary "big bowl" Tip, specifically designed for use with the Hyper Cap. This state-of-the-art Tip & Cap combination redefines your vaping sessions, offering an unparalleled experience for enthusiasts. This pairing is perfect for connoisseurs who desire massive rips and a true “session-style” DynaVap experience. The Hyper Tip features an expanded chamber volume, holding an average of 0.25g, and is crafted from medical-grade titanium for superior performance. Key Features Bigger Bowl, Bigger Hits: The Hyper Titanium Tip features an enlarged chamber, allowing for massive rips and extended vaping sessions with a larger capacity that reduces the need for frequent reloads. Prolonged Sessions: Designed for longer sessions, the larger bowl size of the Hyper Tip lets you enjoy extended vaping without the hassle of constant refilling. Adjustable Airflow: Customize your draw with adjustable airflow, thanks to the precise fit between the Hyper Tip and Hyper Cap. Modular Compatibility: The Hyper Titanium Tip is compatible with all previous DynaVap midsections, tips, and mouthpieces. Important Note: The Hyper Titanium Tip is designed to work exclusively with the Hyper Cap.

Read more less

A Powerful Stainless Steel Tip The M 7 Stainless Steel Tip is designed for those seeking bigger rips and enhanced control. Its chamber and bowl, with increased mass, ensure excellent heat retention, perfect for one-hit extractions. Featuring a Finless Tip design, it reduces heat transfer to the stem by up to 20%, keeping fingers and your stem cool. Bigger Hits With More Control This innovative tip promotes even extraction by evenly distributing mass in the tip and chamber walls, which helps to avoid scorching and hot spots. The Captive Cap fitment boosts airflow, making each hit smoother and more enjoyable. Microdose Ready With Adjust-A-Bowl For those who prefer microdosing, the M 7 Tip includes the popular "adjust-a-bowl" feature that allows the chamber and bowl size to be reduced by half - and it's easier than ever to get your CCD in place.

Read more less

New Device Feel, New Accessory Price We all love getting new things, but sometimes an entirely new device isn't necessary or perhaps it's gotten too expensive to upgrade your favourite device every year. DynaVap has come up with a fantastic way to refresh any of their M portable vaporizers with the DynaVap M7 Condenser Assembly w/Mouthpiece. This accessory is a great way to not only improve the look of your DynaVap, but it also adds some variability and function that your current condenser might lack. Why Does the Tip Get all the Attention? The M7 Condenser not only replaces the internal vapour path for your DynaVap device, but it also stands alone as an aesthetically pleasing and comfortable mouthpiece that will elevate the look of your setup. As the mouthpiece has a more oval-like shape, closer to the natural shape of your pursed lips, many DynaFans prefer this design to the circular tube as the mouthfeel is undeniably a more intuitive shape. Loves Dipping into the Deep End of the Pool The mouth end of the Condenser is strategically designed to work seamlessly with a 10mm water piece and is completely o-ring free. Nobody likes cleaning and replacing o-rings so to have less of them in your setup is always advantageous. If you're using this accessory with the new DynaVap M7 or M7 XL, you'll only have 4 o-rings in total, way less than the 8 it used to be. Adjust Your Airflow as Easily as Your Bowl Size But why stop with the aesthetics? The M7 Condenser has built-in adjustable airflow, simply click the condenser up and down in the mouthpiece and as it snaps into the slots, the vapour to air ratio will be locked in that position, just set it, and forget it, well, unless you want to adjust it. The M7 Condenser Assembly w/Mouthpiece will work with almost DynaVap M device, as well as most of their others, so it is easy to fully change up how your device looks, feels, and performs. The M7 Condenser is a sure-fire way to class up your DynaVap while making it perform even better.

Read more less

The New DynaVap Helix Titanium Tip It’s not news that DynaVap has a history of great aesthetic design, from the Omni to the VonG, but they’ve really taken it to the next level with the DynaVap Helix Titanium Tip. DynaVap is known for their engineering chops, and they are on full display with this piece. Helix Design Leads to Better Results We all love a good pun, and DynaVap never fails to deliver them. This time around it’s both actual and factual: the Helix Tip puts a whole new twist on their design. We’ll give you a second to collect yourself. Once you get past the pleasing aesthetic of the triple helix design, you’ll be happy to learn that the looks are not the only upgrade. The Helix Tip acts to reduce heat transfer from your Tip to your Stem, effectively keeping the thermal mass where you want it to be to provide you with the best vaporizing results. Weighing in at just over 3 grams, this is DynaVap’s lightest tip yet and that was done with the purpose of reducing mass and increasing surface area to dampen the heat transfer. This added functionality and intent are the true differentiators of this DynaVap Tip. The walls of the chamber, though lighter, are thicker and that will act to retain heat and provide a nice even roast for your flower. Add Convection Heat to the Mix A first for DynaVap, this Tip has 3 ports that add convection heat to the equation, and that is a big departure from the 100% conduction heat we’re used to seeing in Tips. These 3 machined internal channels help with airflow and provide evenly distributed heat to the entire chamber of flower. Like all recent DynaVap devices, it does include the Adjust-A-Bowl mechanism that provides the ability to switch between regular and half sized bowls and our Half-Bowl Converter works with it perfectly as well.  The gold colour of the Tip is achieved through a newly developed surface treatment from Dynavap that doesn’t just look stylish, but also adds durability and scratch resistance to the titanium. The DynaVap Helix Titanium Tip Delivers Here's a final tip: you will always be impressed with your DynaVap products. They bring top notch design, engineering, and production in every build to bring you the best torch or induction heater powered portable vaporizer they possibly can, and DynaVap Helix Titanium Tip continues the legacy.

Read more less

DynaVap B Tip Works With All Stems Introducing the DynaVap B Tip – the perfect accessory for any DynaVap user! Like all of DynaVap's tips, this stainless steel tip is designed to work with any DynaVap stem on the market to maximize its compatibility. Permanent Half-Bowl Size Is More Efficient One unique aspect of the DynaVap B Tip is that rather than an Adjust-A-Bowl, this Tip rather has a permanent half-bowl size. Utilizing the half-bowl offers you an efficient way of consuming less flower but with more intense effects and flavour. A single fin design allows the material to heat up quickly so you can make use of all of your active ingredient in a hurry. Fresh Bowls Taste Better & Are Stronger Want stronger effects from your session? Change out your bowl more often and experience intense flavour and fresh effects with every single bowl. In addition to its great features, this accessory is also very affordable and a no-brainer for all DynaVap users. Get your DynaVap B Tip today and start saving even more flower with the incredibly efficient addition!

Read more less

An Easier Way To Carry & Use Your DynaVap Introducing the new SlingStash from DynaVap, a discreet and portable solution for storing your favourite DynaVap vaporizer in a slim, easy to carry package. Crafted from machined aluminum tubing and secured with an overlapping silicone Sling, this SlingStash gives you the convenience of on-the-go usage or general storage at home, without worrying about dirt or debris getting into your device. Integrated DeCapper & Built In Flower Storage The SlingStash is more than just a case though, it also includes a number of features that make the whole DynaVap experience easier. The case includes an integrated DeCapper which provides easy one-handed device use in any situation. And don't worry about hearing it rattle – the SlingStash is designed to eliminate that sound entirely, adding discretion to every carry. The tight fit of the connections helps to keep the smell inside the SlingStash rather than your pocket, and the silicone cup will hold about 3-5 cycles worth of material, meaning you can not only bring your vape but also your flower with you in this single convenient storage container. Works With Standard (92mm) & XL Stems The SlingStash works with most DynaVap stems and setups as it has a removable silicone interior that allows it to work with XL devices like the OmniVap, but it is not recommended for glass DynaVap stems like the BB9 for example. 

Read more less

Extend the Life of Your Flower with the Sneaky Pete Half-Bowl Converter What if I told you that you could increase the amount of time that your flower lasts with one small addition to your DynaVap tip? The Sneaky Pete Half-Bowl Converter is useful to any DynaVap owner who wants to improve the efficiency and ease-of-use of their device.  Precision Design and Quality Manufacturing Designed by Sneaky Pete and manufactured by DynaVap to the high level of precision and quality they are known for. This Half-Bowl Converter kit includes a stainless steel version, a titanium version, and a titanium CCD, to turn any DynaVap tip with an adjust-a-bowl into the perfect half-bowl setup. Simplified Use and Maintenance While the stock adjust-a-bowl is great, getting the CCD perfectly locked into the half-bowl position can be time consuming and difficult, especially if your CCD is less than pristine. The Half-Bowl Converter eliminates this problem. Pop the Half-Bowl Converter into the tip and your CCD will easily snap into place. It takes seconds and there is no chance of it coming out unless you want it to (but you won’t want it to!). It's also super easy to remove for cleaning, swapping to the other metal type, or if you want to switch back to a full bowl. Enhanced Thermal Mass with Stainless Steel The new stainless-steel version of the Converter adds even more thermal mass to your half-bowl setup, supercharging it to be able to take down a half-bowl load entirely in one hit by boosting the efficiency of vaporization. At 0.075g compared to the titanium version’s 0.045g, the stainless-steel Half-Bowl Converter has a clear weight difference and a slight bronze color compared to the titanium, so it’s easy to tell them apart. During in-house tests, we were seeing some of the biggest DynaVap hits that we’d ever produced. A nice side-effect, for sure. Titanium for Purity and Flavour We love the stainless, but the titanium Half-Bowl Converter is no slouch. The power boost is a little less pronounced, but vapers who prioritize flavour will appreciate the purity that titanium brings to the vaporization process when you’re refreshing your bowl often. Versatility and Cost Efficiency The Sneaky Pete Half-Bowl Converter works with induction heaters or a torch and is a super inexpensive accessory that will pay for itself quickly, thanks to the improved efficiency. Get more bang for your buck and enjoy your flower for longer with the Sneaky Pete Half-Bowl Converter. Read our full in-depth review of Maximize Your Dynavap Experience w/ The Sneaky Pete Half-Bowl Converter here.

Read more less

Keep it simple. The Metal DynaVap Rest is designed to serve a single purpose - keep your hot DynaVap tips off of surfaces. This is a great alternative to keeping your DynaVap stored vertically on a magnet.There’s nothing complicated about how the Metal DynaVap Rest works, simply lay your DynaVap down on the metal stand to keep it from damaging anything. Magnets don’t work as securely with some of the longer DynaVap stems, but you’ll never have that problem with this Rest. The Metal Rest will also contribute to cooling your tip down more quickly than when just the end of the cap has contact with a magnet.The Metal Rest will also work with an Anvil, or any hot glass stem you wish to keep off your counter. The Metal DynaVap Rest is an affordable stand that will last forever and is a simple but highly effective solution to cooling your tips.

Read more less

Totally redesigned for 2021, the VonG Titanium Tip by DynaVap has a sophisticated new design that improves both form and function. The Nona Notched Tip has a contoured extraction chamber and can be used directly as a grinder to easily load flower into the oven; just press the tip into your flower and twist to load. The trisected five fin profile is designed to retain more heat than other titanium DynaVap tips to optimize usage with a water piece. The dual position Adjust–a–Bowl lets you customize your chamber size and works perfectly with the Sneaky Pete Half-Bowl Converter. Capitalizing on a two o-ring design for easy maintenance, the VonG has fewer fins than the 2021 Omni and is built with thicker fins for better heat retention and larger hits. Take advantage of the 2021 VonG Titanium Tip for a DynaVap experience that focuses on sizeable doses.

Read more less

The new Captive Cap will help to keep your Cap right where it should be; on your device. The new Captive Cap brings about enhanced functional geometry, creating more evenly distributed airflow. In addition, the heat up and cool down 'clicks' are more noticeable. The updated Captive Cap stays firmly in place, while still rotating freely on the DynaVap. The new Cap will work on any DynaVap tip to allow for full cross compatibility.

Read more less

By clicking earlier in the heating cycle, DynaVap’s Low Temp Captive Cap helps you be more consistent with your torching times, enabling you to vape your flower with less risk of combustion and enjoy a more complex flavour profile. It makes the routine more predictable and enjoyable for many, and it is much more efficient with your material. The Low Temp Captive Cap also has a specialized logo to help you tell it apart from the rest.

Read more less

DynaWax is made to polish and coat your wooden bodies/stems plus mouthpieces and even your DynaStash. It’s also useful for lubricating o-rings. It is made from beeswax and hemp oil which DynaVap sources locally.

Read more less

The DynaVap DynaCoil is made from a single piece of precision-engineered titanium and works to fully vaporize almost any variety or consistency of concentrate. The porous design of the DynaCoil allows the concentrate to soak in and fully saturate the coil, meaning a lot of surface area for vaporization of your concentrate and great airflow regardless of your load size. This method of vaporization means you get outstanding flavor and great efficiency from your concentrate. A must-have accessory for any DynaVap owner interested in concentrates!

Read more less

The DynaKit Basic has everything you need for your DynaVap! This kit is designed as a one-purchase solution for all common items you may lose or need to replace through regular wear and tear. Many people buy these items individually and spend quite a bit more, so you may want to consider bundling everything at once to save time and money!

Read more less

Spare O-rings for all of your DynaVap vaporizers. These are the identical rings, sourced directly from the manufacturer, all OEM high-temp rings. If you need new condenser O-rings for any device (except the OmniVap), select the Condenser option. If you need the O-rings for your tips or for the OmniVap Condenser and mouthpiece, select the Tip/Omni option.

Read more less

These airtight storage containers are the perfect vessel to transport your DynaVap. They will fit any model other than the XL size, and you can even keep your Fat Mouthpiece on your DynaVap. The container secures tightly with a confident snap, but is easy to open with a squeeze. You could also use this container to store your favorite ground herb, and it's inexpensive enough for anyone to afford.

Read more less

The SnapStash is an airtight storage container for taking your favorite herbs on the go. It's easy to conceal, and it secures tightly with a confident snap. Simply squeeze the upper portion of the tube to open your SnapStash, load it with ground herb, and away you go! The SnapStash is available in either a small or large variant.

Read more less

The temperature indicating cap is what makes the DynaVap magic. This is the same cap that is included with every model, if you have lost your cap or otherwise need a replacement, this is what you need.

Read more less