Everything

Crossing Heated Dab Tool (Hot Knife) Load clean. Drop clean. No mess. The Crossing Heated Dab Tool is the easy way to load sticky concentrates into your wax pen or e-rig without scraping the sides of the bowl. A ceramic hot-knife tip, three voltage levels, and simple one-button controls let you warm and release your dab with precision. It’s compact, USB-C rechargeable, and comes with a protective cap for pocket-safe carry. Key Features Heated ceramic tip for smooth, mess-free loading 3 voltages (Blue / Green / Red) to match different concentrate textures Two heat modes: quick cycle (double-click) or manual hold USB-C charging with included cable Protective cover cap for safe storage 550 mAh battery for plenty of reloads between charges One-button operation—fast to learn, easy to use Why You’ll Like It Less mess: Warm the tip and your dab slides cleanly into the chamber—no more hard scraping. Better control: Choose a lower level for softer waxes or higher for firmer concentrates like shatter. Pocket-friendly: Lightweight, capped, and ready to travel. How to Use the Crossing Heated Dab Tool Remove the glass/plastic cap. Power on: Press the button 5× to turn on (repeat to turn off). Select voltage: Press 3× to cycle Blue → Green → Red. Heat the tip: Quick cycle: Press 2× to start a short auto heat. Manual: Press & hold to heat while you load. Scoop your concentrate, hover over the chamber, then warm the tip—after a few seconds the dab will slide offcleanly. Replace the cap when finished and power off. Tip: Use Blue/low for most waxes; bump to Red/high for firmer textures. Battery & Charging The integrated 550 mAh battery delivers many reloads per charge. Top up with the included USB-C cable. As with any small device, actual run-time will vary by heat level and usage. Easy Cleaning While the tip is still warm (not red-hot), wipe it with a vape-safe cleaning wipe to remove residue. Keep the protective cap on during storage to extend tip life and prevent debris. Specifications Tip Ceramic heated “hot-knife” style Heat Levels 3 voltages (Blue / Green / Red) Controls 1 button • 5× power • 3× level • 2× cycle • hold to heat Battery 550 mAh (integrated) Charging USB-C Cap Included protective cover Use Case Loading wax pens & e-rig chambers What’s in the Box Crossing Heated Dab Tool (Hot Knife) Protective tip cover USB-C charging cable Owner’s manual FAQs Which heat level should I use? Start on Blue for softer waxes. If the dab doesn’t release cleanly, step up to Green or Red for firmer concentrates like shatter. How do I keep the tip clean? Wipe the tip while warm with a vape-safe cleaning wipe every few sessions. Avoid scraping with metal tools. Will it work with my wax pen or e-rig? Yes—this tool is brand-agnostic. It simply helps you transfer concentrates cleanly into most chambers. Is there an auto shut-off? The quick-cycle heat runs for a short, pre-set interval. Always power off when finished and replace the cap. Safety Notes The tip gets hot—keep away from skin, fabrics, and flammables. Allow the tip to cool before capping or cleaning. Charge with a quality USB-C cable and reputable power source. Store capped, out of reach of children and pets.

Read more less

Vector Mystique Single Flame Torch Lighter The Vector Mystique pairs a sleek, vertical profile with one of the most comfortable ignition systems we’ve used. At 3.37" tall, 0.78" wide, and 0.94" deep, it’s slim, pocket-friendly, and built from metal for everyday durability. Key Features Side-Lever Ignition: Low-effort, natural thumb press to ignite and hold the flame Ultra-Slim Vertical Design: Tall, narrow body for easy everyday carry Large Flame Dial: Oversized adjuster at the base—turn with thumb and finger (no tool needed) Metal Construction: Solid feel and long-lasting durability Stylish Finishes: Metallic blue or gunmetal satin The side-lever ignition is the star here: press the small metal lever that rests flush against the body to fire the torch, then keep it comfortably depressed as long as you need. Because you’re holding a lever—not pushing in or flicking sideways—it’s exceptionally easy on the thumb and a great choice for anyone with mobility or grip issues. With its slim profile, simple operation, and large, easy-to-use flame adjustment, the Vector Mystique is an outstanding everyday carry torch lighter that blends comfort, style, and performance.

Read more less

Vector Stratos Single Flame Torch Lighter The Vector Stratos is a single flame torch lighter that stands out with its bold steampunk-inspired design and durable metal build. Compact at 2.87" tall, 1.30" wide, and 0.73" deep, it blends eye-catching style with practical performance. Key Features Steampunk Aesthetic: Unique industrial design with tactile controls Protective Jet Cover: Prevents dust and debris from entering the flame jet One-Press Ignition: Single button both opens the cover and ignites the flame Metal Construction: Built to last with premium textured or glossy finishes Adjustable Flame: Screwdriver-friendly control at the base Unlike most lighters with exposed jets, the Stratos features a built-in protective cover that flips open as you ignite, keeping the torch clear and ready to use. The push-down ignition is highly tactile — one smooth press opens the cover and sparks the torch, making it feel as satisfying as it is functional. Available in a textured matte black finish or a glossy sparkle burgundy reminiscent of a sports car, the Vector Stratosdelivers both style and substance for anyone who wants their everyday carry lighter to stand out.

Read more less

Vector Summit Single Flame Torch Lighter The Vector Summit combines the classic feel of a flint ignition with the power of a modern butane torch. Measuring 3.38" tall, 0.88" wide, and just 0.67" deep, this slim vertical design is perfect for everyday carry while still offering serious performance. Key Features Flint Ignition: Traditional spark-wheel design with modern torch flame Slim Vertical Build: Compact, portable lighter with a narrow profile Adjustable Flame Dial: Fingernail or screwdriver-friendly control at the base Stylish Finishes: Available in gunmetal or bold red matte Everyday Carry Ready: Lightweight and highly portable design Instead of electronic ignition, the Vector Summit uses a classic flint-style spark wheel — just flick the wheel to spark, and the butane torch ignites with a clean, blue flame. This makes it a unique option for anyone who enjoys the tactile feel of a traditional lighter but wants the performance of a modern torch. Sleek, stylish, and pocket-friendly, the Vector Summit is ideal for everyday carry or anyone who appreciates a lighter that blends classic design with modern function.

Read more less

Vector Speed Single Flame Torch Lighter The Vector Speed is a compact and powerful single flame torch lighter that delivers reliable performance with smart features in a stylish design. Measuring just 3" tall, 2.5" wide, and 0.75" deep, it’s easy to carry while offering the quality Vector is known for. Key Features Angled Flame: 45° flame output for more comfortable lighting Flame Lock: Hands-free operation with simple thumb control Fuel Gauge: Transparent window shows butane level at a glance Large Adjustment Dial: Quickly fine-tune flame size from the base Stylish Finishes: Available in vibrant colour fade or matte black The intuitive thumb ignition makes the Vector Speed one of the easiest lighters to use. Just press down on the built-in safety, ignite with a push, and lock the flame on with an upward slide for continuous use. Whether you prefer the sleek matte finish or the eye-catching fade pattern, this lighter is designed to look sharp and work flawlessly. Built for portability and performance, the Vector Speed Torch Lighter is an excellent choice for anyone seeking a reliable single flame torch that’s easy to use and maintain. With Vector’s reputation for quality, you can count on it for years to come.

Read more less

The DynaVap B2 takes the original B concept and turns it up a notch — a larger 0.075 g bowl, an ultra-durable silicone stem, and the new DynaTorch lighter, all in one ready-to-go kit. Sorry, your browser doesn’t support embedded videos. Watch the DynaVap B2 in action — bigger bowl, better flavor, and built to travel. Overview The DynaVap B2 keeps the simplicity of the B but adds more power and polish. The 0.075 g bowl, stainless-steel airpath, and heat-resistant silicone stem create smooth, flavorful draws with minimal upkeep. The kit also ships with the new DynaTorch lighter and a protective tin case — everything you need to start fresh. Ships from the USA 🇺🇸 with fast, tracked delivery and American support from SneakyPeteStore.com. Key Features 0.075 g bowl: roughly 50% larger than the original B for richer sessions. Silicone stem: O-ring-free, anti-roll, and built to handle daily use. Stainless-steel airpath for clean taste and long-term durability. 10 mm water-pipe fit for cooler and smoother vapor. DynaTorch included — custom butane lighter inspired by the DynaVap cap. Protective tin case keeps your B2 and DynaTorch together on the go. Induction-heater compatible for hands-free heating options. Tip-swappable with other DynaVap tips for custom sessions. What’s Included 1 × DynaVap B2 device (silicone stem + stainless-steel tip & condenser) 1 × DynaTorch butane lighter 1 × Protective tin case (cap-inspired design) Performance & Design Portable and built to last, the DynaVap B2 offers precision manual heating with zero electronics. The soft-touch silicone stem stays cool while the steel airpath preserves purity of flavor. Pair it with a torch or induction heater for consistent results every time. B vs B2 — At a Glance Bowl Size: 0.075 g (~50% larger than the B) Tip Design: Refined geometry for better heat distribution Stem: Anti-roll silicone design with O-ring-free connection Lighter: DynaTorch included in every kit Case: Protective tin included for travel Specifications Bowl Capacity: 0.075 g (fixed) Stem Material: Silicone (O-ring-free design) Airpath: Stainless Steel Water-Piece Fit: 10 mm connection Heating Method: Butane torch (included) or induction heater Case: Cap-style protective tin Who It’s For The DynaVap B2 is ideal for anyone who wants a low-maintenance manual vaporizer that’s built to travel. It’s an affordable way to enter the DynaVap ecosystem without compromising flavor or build quality. Frequently Asked Questions What’s different about the B2? The B2 adds a larger bowl, refined tip, and silicone stem with anti-roll geometry plus the DynaTorch and protective case included in the box. Is the B2 induction-heater compatible? Yes — its stainless-steel tip and cap work with nearly all standard DynaVap-style induction heaters. Is the CCD adjustable? No — the 0.075 g bowl is fixed for easy, repeatable loads. Can I swap tips? Yes — most DynaVap tips fit securely on the B2 stem. Will it fit a water pipe? Yes — the 10 mm connection makes it ready for compact water cooling. Read our full in-depth review of DynaVap B2 Review (2025): Bigger Bowl, Silicone Stem & DynaTorch Included here.

Read more less

Vector Ultra Slim Single Flame Torch Lighter The Vector Ultra is a sleek, pocket-friendly torch lighter designed for everyday carry. Measuring just 2.4" tall, 1.36" wide, and only 0.45" deep, this ultra-slim design makes it one of the most compact single flame lighters available. Built from durable metal, it feels solid in the hand while staying light and easy to carry. Key Features Ultra-Slim Design: Just 0.45" deep for a discreet everyday carry Angled Flame: 45° flame output for easier, more comfortable lighting Simple Thumb Ignition: Push-to-the-side action with intuitive grip point Durable Metal Build: Satin rose gold or metallic speckled blue finish Adjustable Flame: Fine-tune with a coin or small screwdriver Operating the Vector Ultra is simple and intuitive. Rest your thumb on the raised grip near the top, push to the side, and the angled flame ignites instantly. The compact flame adjuster at the bottom lets you dial in the flame size for your needs. If you’re looking for a compact and stylish torch lighter that’s as slim as it is reliable, the Vector Ultra is a perfect choice. Sleek, discreet, and built to last, it’s ideal for anyone who values everyday carry performance without the bulk.

Read more less

Vapvana All-Star Wired Kit – Affordable Powerhouse Ball Vape The All-Star Wired Kit by Vapvana is the newest addition to their lineup of high-performance desktop vaporizers. Built with a stainless steel housing and a modular design, the All-Star delivers massive, reliable vapour at a fraction of the price of premium titanium units. If you’ve wanted to experience the upper echelon of ball vape performance without breaking the bank, this kit is your ticket. Ball Vape Performance Without the Premium Price The All-Star borrows from Vapvana’s proven design philosophy: powerful heat, efficient airflow, and dense, flavour-rich vapour. While the Screwball remains Vapvana’s flagship titanium heavy-hitter, the All-Star provides an affordable entry point into the same league of performance. With its stainless steel build, diffuser-style heating, and 300 2.5mm ruby balls, the All-Star is engineered to satisfy both daily users and connoisseurs alike. Customizable Bowl for Microdosing or Full Sessions One of the standout features of the All-Star is its two-in-one modular bowl. Use it in half-size mode for a 0.1g load - perfect for microdosing or solo use - or switch to full-size mode for a 0.2g load, ideal for sharing or when you want huge, lung-expanding clouds. This flexibility makes the All-Star a versatile choice, bridging the gap between efficiency and raw power. Back-to-Back Power with Corded Convenience Unlike portable units that rely on battery life, the All-Star is a corded desktop vaporizer. Once it heats up, it’s ready to deliver back-to-back sessions without losing performance. No downtime, no waiting—just consistent, dense vapour whenever you want it. For daily drivers who want reliability and endurance, a wired setup is the gold standard. Engineered for Flavour and Reliability The All-Star’s stainless steel heater and ruby ball-filled diffuser maximize thermal retention and airflow, ensuring every hit is smooth, flavourful, and potent. Combined with the modular bowl, glass joint adapters, and a digital PID temperature controller, the All-Star Wired Kit offers a complete package designed to perform for years. What’s in the Box All-Star Wired Heater (stainless steel, pre-assembled with rubies) All-Star Modular Bowl with removable wooden handle 18mm and 14mm glass adapters for bowl Digital Temperature Controller (PID) Power cable (North American) Heater stand Scoop & Tamper Tool (SQP) Wooden cleaning brush Spare screens & O-rings If you are comparing leading options across the category, you can also read our Best Ball Vapes of 2026 buyer’s guide. Why Choose the All-Star Wired Kit? If you’re looking for a powerful, affordable ball vape that can stand toe-to-toe with premium models, the All-Star Wired Kit is a clear choice. It combines Vapvana’s reputation for dependable performance with a price point that makes top-tier vapour accessible to more enthusiasts. For anyone wanting to experience the next level of desktop vaporization, the All-Star delivers inning after inning.

Read more less

Vapvana All-Star Cordless Kit – Wireless Ball Vape Power and Freedom The All-Star Cordless Kit by Vapvana takes the same affordable power and performance of the All-Star lineup and removes the tether. With a cordless heater head and an organized wooden dugout dock, this system delivers massive, flavour-rich vapour without being tied to a wall. Designed for both flower and concentrates, the All-Star Cordless is a complete dual-use solution built for enthusiasts who want freedom, performance, and convenience in one package. Wireless Performance, Desktop Reliability Vapvana is known for its powerful ball vapes, and the All-Star Cordless continues that tradition with a stainless steel heater packed with 300 ruby balls (2.5mm). While the premium Ace system is made from titanium and uses gem-cut rubies with a larger bowl capacity, the All-Star Cordless provides a more accessible entry point to the same high-level performance. You still get dense vapour, strong flavour, and dependable heat - now with true wireless convenience. Dual-Use Design: Flower or Concentrates What sets the All-Star Cordless apart from the wired version is its dual-use capability. Out of the box, it’s ready for flower with the All-Star Modular Bowl, which can be used in half-size mode (0.1g microdose) or full-size mode (0.2g heavy hits). But the kit also includes a 25mm quartz auto-spinner banger with pearls and marble top, making it a fully capable concentrate system as well. With the included glass reducer, you can fit the banger onto 10mm or 14mm rigs. The Dugout Dock: Organized and Ready The wooden dugout dock is the control centre of the All-Star Cordless Kit. It holds the digital PID controller, heating coil, heat shield, heater stand, and all included accessories in one compact station. Built-in slots for 10mm, 14mm, and 18mm joints mean you can keep everything neatly in place. This isn’t just a heater - it’s a complete desktop setup designed for convenience and everyday use. Freedom vs. Endurance Going cordless means you gain tether-free freedom to move and use your setup without being locked to a wall plug. The trade-off is that, unlike the wired version, you won’t get endless back-to-back sessions without breaks. For many users, the ability to untether more than makes up for it, especially with the added dual-use flexibility and all-in-one dock design. What’s in the Box All-Star Cordless Heater (stainless steel, pre-assembled with rubies) All-Star Modular Bowl with removable wooden handle Heating Coil Assembly (25mm “Hot Hole”) Wooden Dugout Dock with built-in accessory slots Quartz Banger (25mm Auto Spinner) with pearls and marble top Glass Reducer (14mm to 10mm) Digital Temperature Controller (PID) Power cable (North American) Heater Stand Post for the dock Scoop & Tamper Tool (SQP) Wooden Cleaning Brush Spare screens, o-rings, and screws Why Choose the All-Star Cordless Kit? If you want premium ball vape performance in a complete, organized package at an affordable price, the All-Star Cordless Kit is your answer. With wireless freedom, dual-use compatibility, and Vapvana’s reputation for reliable performance, this system is built to impress. Whether you’re chasing massive clouds, rich flavour, or the convenience of a docked all-in-one setup, the All-Star Cordless delivers inning after inning.

Read more less

Puffco Pivot Glass Stems – Enhance Your Portable Concentrate Experience Upgrade your Puffco Pivot with cooler, smoother, and more flavorful vapor using one of four premium glass stem options designed for enhanced performance. Overview The Puffco Pivot already delivers excellent concentrate performance with its stock silicone mouthpiece, but switching to a glass stem instantly elevates flavor, cooling, and overall smoothness. These four custom stems offer improved airflow, increased vapor path length, and specialty cooling features—all without compromising portability. 🔧 Simple Installation – Secure Fit Each stem is designed to fit the Pivot perfectly. Just open the atomizer lid and slide the glass stem under the silicone lip. It locks into place the same way as the lid and stays secure until removed. 💨 Why Upgrade to Glass? Glass provides cooler vapor, smoother airflow, and cleaner flavor. These stems extend the vapor path while adding features like bead-filled chambers, spike diffusers, and water filtration. The result is smoother, cooler, and more enjoyable hits—no bulk or extra attachments required. 🧪 Choose Your Cooling: 4 Stem Options 🚀 The Puffco Pivot Evolution Stem Ideal for users who want maximum dry cooling in a compact form. This 2.5-inch stem is filled with multicolor glass beads that increase internal surface area, slowing vapor and pulling heat before it reaches your lips. Length: 2.5 inches Cooling Method: Multicolor glass bead fill Best for: Maximum dry cooling 🌵 The Puffco Pivot Cactus Stem At only 1.5 inches long, the Cactus Stem offers compact cooling with three pairs of internal spikes that break up vapor flow and reduce heat. Perfect for on-the-go use with minimal size increase. Length: 1.5 inches Cooling Method: Triple-spike vapor disruption Best for: Discreet cooling with minimal bulk 💧 The Puffco Pivot BubbleStem For the smoothest possible draw, the 3.5-inch BubbleStem features a small built-in water chamber that functions like a mini bubbler. Just a small amount of water dramatically reduces throat harshness and cools vapor effectively. Height: 3.5 inches Cooling Method: Built-in water chamber Best for: Maximum cooling and smoothness 🔥 The Puffco Pivot 3D Bent Stem The longest and coolest dry stem in the lineup. The 5.5-inch 3D Bent Stem is packed with full-length 3D cooling spikes that increase surface contact and strip heat from vapor as it travels. A top choice for users seeking dry cooling without sacrificing flavor. Length: 5.5 inches Cooling Method: Full-length 3D cooling spikes Best for: Maximum dry cooling with superior flavor 📦 Features at a Glance All stems fit securely under the Pivot lid system No tools or adapters required Improved cooling and smoother vapor Made from durable borosilicate glass 100% compatible with all Puffco Pivot units Final Thoughts The Puffco Pivot is already one of the most capable portable concentrate vaporizers available, but adding a glass stem unlocks a major upgrade in flavor, cooling, and smoothness. Whether you want compact portability or full cooling performance, this lineup gives you the freedom to customize your Pivot exactly how you like it. Choose the stem that fits your style and elevate your Pivot experience. Sneaky Pete Vaporizers — Your source for premium Puffco accessories and performance glass.

Read more less

The Triple Play Pipe – A Classic Shape With a Functional Twist Meet the Triple Play Pipe: a familiar favourite reimagined with a subtle yet powerful design upgrade. This is the kind of water pipe that feels instantly familiar — but delivers more flavour, more cooling, and more compatibility with your favourite setups. Whether you’re using a vaporizer with a 14mm water pipe adapter or just love the smooth chug of a great piece, this one’s built for performance. 🔹 Classic Bong Shape – Modern Function Standing at a compact 10 inches tall, the Triple Play Pipe sports a time-tested silhouette: a broad cone-shaped base for water volume, leading up to a slightly flared comfort-fit mouthpiece. Not too big, not too tight — just right for easy draws and flavour-packed sessions. 🔹 Built for Vaporizers and Adapters This pipe features an 18mm joint with a 14mm downstem, giving you broad compatibility across most 14mm water pipe adapters used in the vaporizer world. If your vape has a WPA, chances are this piece is plug-and-play. 🔹 The Iconic Chug – With Airflow Upgrades At the base of the removable downstem, you’ll find a 6-slit classic tube percolator — a tried-and-true design that gives you that deep, familiar bong rumble with a touch of extra airflow. The added side slits help open up the pull, balancing backpressure with satisfying diffusion. 🔹 Triple Chamber Splash Protection What sets the Triple Play Pipe apart is its upper section. Nestled between the water reservoir and the mouthpiece is a visually striking triple-glass splash catcher. This triple-tiered structure doesn’t just look cool — it actively reduces water splashback, keeping your lips dry and your session clean. It’s a rare blend of form and function in one smooth piece. 🔹 Designed for Ball Vapes – But Great With Any Setup If you’re using a ball vape or another high-performance desktop vaporizer, you’ll appreciate the cooling capacity here. The large base holds enough water for heat dissipation, while the airflow and percolation aren’t so intense that they mute flavour. It’s the sweet spot between smooth and tasty. 📦 Features at a Glance: Height: 10” tall Joint: 18mm female with included 14mm downstem Percolator: Classic tube-style with 6 diffusion slits Unique triple-glass splash catcher section Cone-style base holds solid water volume for cooling Comfort-fit mouthpiece Compatible with 14mm water pipe adapters Ideal for use with vaporizers 🚀 Final Thoughts The Triple Play Pipe is exactly what it sounds like — a three-way win: iconic design, vaporizer compatibility, and standout splash control. Whether you’re upgrading your setup or adding a new daily driver to your rotation, this piece delivers classic function with a premium touch.

Read more less

DynaVap G3 – Battery-Free Glass Vaporizer for Dry Herb The Purest Way to Vape, Now Under $35 Experience Thermal Freedom No batteries. No buttons. No nonsense. The DynaVap G3 brings back the joy of pure, direct vaporization—with just a torch and a flick of the wrist. Built around the power of thermal extraction, this all-glass portable vaporizer delivers rich flavour and smooth hits in seconds. Whether you're a microdoser, minimalist, or just tired of charging, the G3 keeps it simple without cutting corners. Why Choose the G3? Battery-Free by Design – Heat it with a torch - no cables, no chargers, no waiting. Glass-on-Glass Purity – A unibody stem and tip combo built from quality glass for clean flavour and easy maintenance. Captive Cap Technology – Audible “click” lets you know exactly when it’s ready—no guesswork, no overheating. Tri-Lobe Stem – Anti-roll design keeps your G3 from slipping off the table and onto the floor. Pocket-Sized Efficiency – The G3 tin case fits anywhere. Just toss it in your pocket, heat it up, and go. Simplify Your Session Load the chamber with just a pinch - around 0.05g is all it takes. Then cap it, heat it, and inhale. The G3’s click-to-vape system means you don’t need to guess when it’s ready. It’s fast, efficient, and designed to stretch your herb further than you thought possible. Want a stronger hit? Just let it soak up a few more seconds of heat, then ride the clouds. What’s in the Box? 1 × G3 Glass UniBody (tip + stem) 1 × Stainless Steel Captive Cap 1 × Clipper Torch Lighter (USA only) 1 × Slim Metal Storage Tin Recommended Tips Heat the cap evenly near the tip until you hear the first “click.” Inhale slowly for best vapour density and flavour. Listen for the second “click” to know when it’s cooling down. For stronger hits, heat for an extra second or two after the first click. Lightweight. Portable. Powerful. The DynaVap G3 isn’t just a budget-friendly entry into the world of dry herb vaporization - it’s a fully capable, highly efficient tool in a glass package. Whether you’re new to vaping or just want something simple and effective, this is one of the best value buys under $40. Perfect For: Anyone new to vaporizing looking for an easy entry point Fans of clean flavour and full manual control Microdosers and budget-conscious users People who hate charging and just want to heat and go Ready to Cut the Cord? Step away from batteries and into total control. The DynaVap G3 is your new go-to for flavourful, on-demand thermal extraction—whenever and wherever you want it. No batteries. No limits. Just glass, flame, and performance. Read our full DynaVap G3 review here.

Read more less

Ceramo XL – The Pinnacle of Battery-Free Convection Welcome to a new standard in dry herb vaporization. The Ceramo XL is a precision-engineered convection device built for purists who value clean flavour, efficient extraction, and rock-solid durability. It’s designed to outperform traditional vaporizers — all without batteries or electronics. One-Piece Zirconia Construction The Ceramo XL is machined from a solid block of black zirconia — a tough, heat-resistant ceramic known for its stability and neutral flavour. Its friction-fit screen and no-o-ring design reduces maintenance and keeps performance consistent session after session. Designed for Performance, Built to Last Ceramic Airpath – Smooth airflow with minimal heat soak or flavour distortion Ultra-High-Flow (UHF) Stem – Built for strong, easy draws and fast clearing Heater Plate Matrix – Optimized for deep, even convection extraction 0.2g Chamber Capacity – Wide and shallow for easy loading and quick clearing 14mm Male Taper – Compatible with your favourite glass pieces Replaceable Metal Screen – Friction-fit for easy cleaning or swapping How to Use the Ceramo XL Loosely fill the chamber with a medium grind of dry herb. Place the XL Camo Cap onto the heater end of the device. Apply heat to the tip using a torch or the Inductor. Heat for 4–7 seconds (Inductor) or 7–15 seconds (torch). Inhale gently from the stem. Rotate and reheat for 2–3 cycles to fully extract your material. What’s Included 1 x Ceramo XL (Black Zirconia) 1 x XL Camo Cap 1 x Replaceable Metal Chamber Screen 1 x Bambox Storage Case 1 x Burner Torch Lighter 1 x Cap Adjustment Tool Inspired by the Convector XL The Ceramo XL expands on the proven design of the Convector XL, delivering even greater airflow, upgraded materials, and a simplified, o-ring-free structure. It retains the trusted heater matrix and 14mm taper while pushing flavour and form to the next level. Why Choose Ceramo XL? Ceramic Airpath – Smooth flavour and high heat resistance Low Maintenance – No o-rings or fragile seals Fast Extraction – Full sessions in 2–3 heat cycles Glass Ready – 14mm taper fits water pieces right out of the box If you’re ready for high-performance convection without batteries or complexity, the Ceramo XL is your next move.

Read more less

Camouflet Super Capacitor The Ultimate Upgrade for XL Performance The Super Capacitor is the enhanced heating powerhouse for the Convector XL and Ceramo XL. Built from pure stainless steel and packed with quadruple the thermal mass, it delivers unmatched heat retention, increased extraction, and smoother sessions — even with a torch. Key Features: 100% Stainless Steel Construction – Designed for optimal induction compatibility and long-lasting durability 4x the Thermal Mass – Retains heat far longer for extended sessions and back-to-back hits without reheating Expanded Heating Matrix – More internal plates deliver deeper, more complete extraction Compatible with Convector XL & Ceramo XL – Plug-and-play with your existing Camouflet XL gear Forgiving Heat-Up – Easier for torch users with more margin for error and longer heat windows Why Choose the Super Capacitor? This is the biggest and most capable heater in Camouflet's lineup. Whether you’re just entering the battery-free vaporizer world or looking to push your XL rig further, the Super Capacitor gives you longer sessions, more consistent vapour, and higher extraction efficiency — all with less precision required. It’s a smoother ride with much more horsepower. Heat it with any source, but for best results, we recommend pairing it with Camouflet’s Inductor. Includes: 1x Super Capacitor Compatible With: Convector XL Ceramo XL

Read more less

Big vapor, compact form. The Healthy Rips FURY 3 delivers pure convection heat, rapid performance, and true flavor from a palm-sized device that means business. Sorry, your browser doesn’t support embedded videos. See the FURY 3 in action — full convection performance, ultra-portable size. Overview The Healthy Rips FURY 3 is a compact, high-performance convection vaporizer designed for flavor and efficiency. With a 25-second heat-up time, pure vapor path, and durable pocket-sized build, it delivers desktop-quality results in a travel-ready package. Ships from the USA 🇺🇸 with fast, tracked delivery and reliable support from SneakyPeteStore.com. Key Features 25-Second Heat-Up: Lightning-fast warm-up for quick sessions anywhere. Convection Heating: Hot-air convection with a hint of radiant heat for even extractions. Pure Vapor Path: Titanium chamber and glass stem for clean, flavorful vapor. Ultra-Portable Design: Small, durable, and discreet for everyday carry. Water-Pipe Ready: Drives thick clouds through your favorite glass piece. What’s in the Box 1 × FURY 3 Device 1 × Protective Travel Cover 1 × Standard Mouthpiece (for glass accessories) 1 × XL Glass Cooling Stem (3" / 80 mm) 1 × Dosing Capsule 1 × USB-C Charging Cable 1 × Extra O-Ring & Screen Set 1 × Cleaning Tool 1 × Cleaning Brush 1 × Tweezers 1 × User Manual Performance & Design The FURY 3 delivers true convection performance with exceptional consistency. Its titanium oven and glass cooling stem create smooth, flavorful vapor while keeping maintenance simple. Compact yet powerful, it’s built for travelers and daily users alike who demand real results from a small package. Warranty Includes a One-Year Free Replacement Warranty backed directly by Healthy Rips. Who It’s For The FURY 3 is ideal for anyone who values flavor, speed, and portability. Whether it’s your first vaporizer or your next go-anywhere setup, it brings serious performance and clean convection power in the palm of your hand. Frequently Asked Questions How fast does the FURY 3 heat up? It reaches full temperature in around 25 seconds — fast enough for quick solo sessions. What type of heating does it use? The FURY 3 is primarily convection-based, using hot air for smooth, even extractions. Can I use it with glass water pipes? Absolutely — it’s powerful enough to handle 14 mm or 18 mm adapters with ease. What’s inside the vapor path? All premium materials: titanium, stainless steel, and glass. No plastic or silicone in the airpath. What kind of warranty does it include? Each unit comes with a one-year free replacement warranty from Healthy Rips. Read our full in-depth review of FURY 3 Vaporizer Review: Convection Power in a Truly Pocket-Sized Package here.

Read more less

Unplug your setup. The Wireless One Hit Wonder V2 (WOHW V2) delivers full desktop performance without a cord attached to the heater — combining big clouds, rich flavor, and true hybrid heating in one clean, modular system. Sorry, your browser doesn’t support embedded videos. See the Wireless One Hit Wonder V2 in action — full desktop power, no wires attached. Overview The Wireless One Hit Wonder V2 (WOHW V2) from Crossing Tech is a modular, true wireless ball vape system designed to deliver full desktop performance with a cleaner, simpler setup. The ruby-filled titanium heater head provides strong thermal mass and even heat distribution for thick, flavorful extraction — whether you prefer pure convection in injector mode or hybrid performance in diffuser mode using the included Matrix Bowl and adapter system. Ships from the USA 🇺🇸 with fast, tracked delivery and customer support you can count on. Why You’ll Love It WOHW V2 Wireless Design: True ball vape performance with no cord attached to the heater. Injector or Diffuser Flexibility: Run clean convection hits or switch to diffuser mode for thicker, hybrid extractions. Ruby-Filled Titanium Head: Dense thermal mass and even heat distribution for consistent, powerful results. Solid Aluminum Dock: Secure resting base with integrated coil guard and onboard tool storage. Modular Bowl System: Matrix Titanium Bowl with diffuser adapters and adjustable screens for custom airflow and load size. Designed for Performance Every part of the WOHW V2 is built for airflow efficiency, thermal stability, and real-world usability. The Matrix Titanium Bowl system allows you to move between injector and diffuser configurations in seconds, while the precision-machined titanium heater head maintains consistent heat across long sessions. The result is a system that feels powerful, predictable, and refined on any desktop. Quick Start Tips (WOHW V2) Burn-Off: Set your PID controller to 800°F and run the heater for 10 minutes before first use to clear any factory residue. Starting Temperature: Begin between 535°F–575°F and adjust based on airflow, load size, and personal preference. Hybrid Mode: Preheat the bowl upside down on the injector before loading to introduce conductive heat for denser extraction. Materials: Works best with dry herb, and can also be used with hash or small concentrate loads using a screen or herb base. What’s Included (WOHW V2 Kit) 1 × Solid Aluminum Dock Station with coil guard and tool storage 1 × 25 mm XL Barrel Heater Coil 1 × Classic PID Controller 1 × Titanium Heater Head filled with 3 mm ruby balls 1 × Matrix Titanium Bowl with 14.4 mm and 18.8 mm glass joints 1 × 21.5 mm Diffuser Adapter (preassembled for Matrix Bowl) 1 × 22.15 mm Diffuser Adapter Ring (for 22 mm diffuser bowls) 2 × Flat Mesh Screens (Matrix Bowl) 1 × Adjustable Height Mesh Basket Screen 2 × Viton O-Rings (Matrix Bowl) 1 × SQP Scoop & Tamper Tool 1 × Wooden Handle Cleaning Brush 1 × Power Cord 1 × Allen Key (coil install) 1 × Instruction Sheet Frequently Asked Questions Is the WOHW V2 completely wireless? The heater head runs wirelessly while seated on the dock. The PID controller still requires a power connection. What’s the difference between injector and diffuser mode? Injector mode delivers primarily convection-driven vapor for clean, flavor-forward hits. Diffuser mode introduces conductive heat for thicker, hybrid-style extraction. Can the WOHW V2 handle concentrates? It’s optimized for dry herb, but can be used with a 25 mm quartz banger or screened herb base for concentrates (sold separately). What temperature should I start at? Start between 535°F and 575°F and allow a 5-minute heat soak for consistent performance. Is the WOHW V2 beginner-friendly? Yes — the modular design is straightforward, and the kit includes a full instruction sheet to guide setup and use. Final Thoughts The Wireless One Hit Wonder V2 is a refined, modular desktop system built for people who want real power without a cluttered setup. Whether you chase flavor with convection or push dense clouds with hybrid extraction, the WOHW V2 delivers a clean, consistent, and premium experience every session. Read our full in-depth review of Wireless Ball Vape Power – Wireless One-Hit Wonder (WOHW) Unboxing & Demo here.

Read more less

Extra Large Chill Ice Cube Tray Set The ultimate ice solution for your Chill Steel Pipe. This custom-moulded tray is designed to create the largest possible ice cubes that will still fit perfectly inside your Chill Pipe — no wasted space, no compromises. Made Specifically for Chill Steel Pipes Each tray produces seven extra-large cubes engineered to match the internal dimensions of your Chill Pipe. That means you get maximum ice volume for a longer-lasting chill — keeping your water icy cold for up to 24 hours. Why Use This Instead of Regular Ice? Perfect Fit — No jamming or melting cubes to make it work Maximum Chill — Fills the pipe with ice for extended cooling Purpose-Built — Designed for your Chill, not your cocktail A Must-Have Accessory Using regular freezer ice just doesn't cut it. With this tray, you're always ready to load up your Chill Pipe with precision-sized cubes that perform better and last longer. It’s the easiest upgrade you'll ever make. What’s Included: 1 x Extra Large Ice Cube Tray (7 cube capacity) Made from durable, food-safe silicone Upgrade your Chill experience with the ice tray designed to match it — because Chill deserves better than standard cubes.

Read more less

Chill Lid & Plug Set Take your Chill Steel Pipe anywhere — without the mess. This custom lid and plug combo seals both ends of your Chill, making it 100% travel-ready and leakproof. Travel with Ice-Cold Confidence Whether you’re heading to a friend’s place or just out for the day, this set lets you pre-load your Chill with water and ice at home, seal it tight, and enjoy icy cold hits anywhere. It stays cold for up to 24 hours, so you’re always ready to chill on the go. Engineered for a Tight, Leakproof Seal Custom-designed waterproof plugs for both openings Keeps water locked in and spills locked out Built for mobility without sacrificing performance Pairs Perfectly With: Want the full mobile Chill setup? Use it with our Extra Large Chill Ice Cube Tray to pre-load your pipe with perfectly sized cubes before you head out. No melting mess, no hassle. What’s Included: 2 x Top Lid Plug 1 x Downstem Plug For Chill owners who like to keep it cold and keep it moving — this is your go-to upgrade.

Read more less

Glitterbomb – The Ultimate Indestructible Ice Bong Turn Heads. Hit Smooth. Never Break. Meet the Glitterbomb — a limited edition stainless steel bong that’s part art piece, part performance machine. With a stunning glitter finish and a construction built to last a lifetime, this is the kind of pipe you don’t hide in a drawer — you display it proudly and use it relentlessly. Unbreakable Design with Stainless Steel Power Made from double-wall, vacuum-insulated stainless steel, the Glitterbomb doesn’t just look incredible — it’s built to withstand anything. The interior features a patented ceramic lining for pure flavour and smooth vapour, giving you the taste of glass with none of the fragility. Limited Edition Glitter That Lasts The name says it all — this pipe explodes with colour. The glittering finish is fully sealed and protected, so it won’t fade, flake, or come off during cleaning. This is a true statement piece that’s made to be admired and used. Engineered for Icy Cool Hits Twist off the neck, drop in ice, add water, and enjoy the kind of cooling power only vacuum insulation can provide. The Glitterbomb keeps ice frozen for hours, giving you smoother, colder sessions without the constant refill. Pure Performance from Top to Bottom Every Glitterbomb includes a glass bowl and indestructible aluminium downstem, with a 14mm female joint that works seamlessly with most vaporizers and water pipe adapters. Food-grade silicone seals keep every hit clean and tight. Built for Daily Use. Designed to Last Forever. If you're tired of broken glass, weak cooling, or short-lived gimmicks, the Glitterbomb is your upgrade. Clean it like glass, use it like steel, and never worry about shattering your favourite piece again. Highlights: Limited edition glitter finish – fully sealed and protected Indestructible stainless steel body with double-wall insulation Patented ceramic interior for pure taste Compatible with vaporizers and 14mm adapters Comes with aluminium downstem and glass bowl Made to handle ice like a champ – cool, smooth, and clean The Glitterbomb is more than just durable — it's unforgettable. Whether you’re looking for your last bong ever or your most impressive one yet, this pipe delivers in every way.

Read more less

Tommy Chong x Chill Pipe – Limited Edition Paisley Collection Retro Vibes. Modern Chill. The Tommy Chong Limited Edition Chill Pipe – Paisley Collection is a tribute to cannabis culture, style, and one of its most legendary icons. Featuring bold bandana-inspired paisley prints in classic red or blue, this drop brings serious nostalgia with the rugged, high-performance design Chill Pipes are known for. Old-School Cool Meets New-School Engineering Behind the vintage paisley print is the Chill Pipe’s legendary stainless steel body — double-wall vacuum insulated to keep your ice colder, longer. The ceramic-lined interior delivers clean, flavour-rich hits with no metallic aftertaste, all wrapped in a bold, collectible shell stamped with Tommy Chong’s seal of approval. The Chill That Never Quits Twist off the top, load it with ice, and enjoy icy-smooth draws that last for hours. The durable steel build means no risk of breaking, and no babying required — this is a bong that’s built to use. Why You Want This Pipe Exclusive paisley artwork (Official Tommy Chong collab) in red or blue — loud, proud, and collectible 14mm female joint compatible with most bowls & vapes Glass bowl + indestructible aluminium downstem Food-grade silicone seals for a perfect, airtight fit Double-wall vacuum insulation – keeps ice frozen for hours Ceramic-lined interior – clean hits, no metal taste Ultra-durable stainless steel body – built to travel, built to last Easy to clean – just use isopropyl alcohol Whether you’re lighting up in the backyard or headed to the next sesh, the Tommy Chong x Chill Pipe delivers heavyweight chill with heavyweight style. Limited run. Maximum vibe.

Read more less

Rubberized Chill Steel Pipe – Rugged, Reliable, and Ready to Chill Built to Last. Designed to Perform. The Rubberized Chill Steel Pipe is an absolute beast — combining rugged durability with smooth, icy performance. Featuring a rubberized matte exterior that feels as solid as it looks, this water pipe is made to handle daily use, travel, and any adventure you throw at it. Whether you’re using it at home or on the go, it’s the definition of reliable. Rugged Finish. Pure Function. The rubberized coating adds extra grip and a tactical, stealthy look. This is a pipe you’ll want to use and not worry about. The tough exterior adds protection without compromising on style, and the internal construction is just as serious. Vacuum-Insulated Stainless Steel Core Inside the steel body, you’ll find double-wall vacuum insulation for unbeatable ice retention. Add to that the ceramic-lined interior, and you’ve got a bong that delivers clean, flavourful hits every time — no metallic taste, no compromise. Chill Hits Stay Cold Longer Twist off the neck, drop in ice, and enjoy hours of cool, smooth vapour. Thanks to the vacuum insulation, the Chill holds its temperature far longer than any standard glass bong — and with no risk of shattering along the way. Includes a Complete, Tough Setup Each Chill Steel Pipe comes ready to roll with a glass bowl and an indestructible aluminium downstem. The 14mm female joint works with your favourite vapes and adapters, and food-grade silicone seals keep everything tight and clean. Why Choose the Chill Pipe? Durable rubberized matte finish – extra grip, sleek look, rugged feel Unbreakable stainless steel body with double-wall insulation Glass-like ceramic interior for flavourful, pure draws Designed to handle ice and cold retention better than glass Includes aluminium downstem and glass bowl Low-maintenance and easy to clean with isopropyl alcohol When you want a bong that’s low-profile in colour but high-performance in function, the Rubberized Chill Steel Pipe is your go-to. Strong, subtle, and seriously satisfying — this is a daily driver with zero compromise.

Read more less

Mirror Chill Pipe – Limited Edition Stainless Steel Ice Pipe Sleek. Smooth. Unbreakable. Meet the Mirror Chill Pipe, a limited edition masterpiece that blends high-end function with polished perfection. Featuring a striking mirror finish and indestructible stainless steel construction, this is more than a pipe — it’s a statement. Built to perform, built to last, and built to turn heads. Unbreakable by Design, Cool by Nature Crafted from double-wall, vacuum-insulated stainless steel, the Mirror Chill Pipe is engineered for everyday use with zero compromise. Inside, a patented ceramic lining delivers the clean, smooth taste of glass — without the risk of ever breaking it. Striking Mirror Finish – Built to Shine The high-gloss, mirror-polished exterior isn't just for looks — it’s sealed and protected to resist scratches, stains, and wear. This pipe doesn’t just sparkle out of the box; it stays flawless with every use and clean. Engineered for Ice-Cold Rips Twist off the top, drop in ice, and let vacuum insulation do the work. The Mirror Chill Pipe keeps ice solid for hours, delivering colder, smoother hits than traditional glass — without the hassle of constant refills. Serious Performance, Seamless Compatibility Each Mirror Chill Pipe includes an ultra-durable anodized aluminium downstem and glass bowl, with a 14mm female joint that pairs easily with most vaporizers and water pipe attachments. Food-grade silicone seals ensure every hit is tight, clean, and satisfying. Built to Be Your Forever Piece Tired of fragile glass and gimmicky designs? The Mirror Chill Pipe is your upgrade — sleek, strong, and made to go the distance. Easy to clean, impossible to break, and beautiful enough to display. Highlights: Limited edition mirror-polished finish – sleek and scratch-resistant Vacuum-insulated stainless steel body for extreme durability Patented ceramic interior delivers pure flavor Compatible with 14mm vaporizers and water pipe adapters Includes glass bowl and anodized aluminium downstem Engineered for long-lasting ice retention and ultra-cool hits The Mirror Chill Pipe is more than a pipe — it’s a legacy piece. If you’re ready to own the last pipe you’ll ever need, this is it.

Read more less

Arizer Solo 3 Version 2.0 — Premium Portable Dry Herb Vaporizer 🌿 Fast, flavorful, and powerful — the Arizer Solo 3 Version 2.0 takes portable vapor to a whole new level. Sorry, your browser doesn’t support embedded videos. Overview The Arizer Solo 3 Version 2.0 is the latest evolution in Arizer’s renowned lineup, offering instant heating, full customization, and a pure glass vapor path for outstanding flavor and performance. Designed for both newcomers and connoisseurs, it delivers power, purity, and precision in a compact form. Key Features Instant Heating: Heats up in just 5–15 seconds using hybrid ceramic convection technology. Dual Modes: Choose between Session Mode for longer draws or On-Demand Mode for quick, dense hits. Precise Temperature Control: Adjustable from 122°F–428°F (50°C–220°C) in 1° or 10° increments. Pure Glass Vapor Path: Isolated airpath and XL Glass Pod System deliver smooth, flavorful vapor. Long Battery Life: Up to 3 hours of use with fast USB-C PD charging and pass-through capability. Premium Build: Sleek brushed aluminum body with the new “Sea of Green” finish and a reversed OLED display. Canadian Engineering: Designed and built by Arizer, known for precision and reliability. What’s Included 1 × Solo 3 Version 2.0 Multi-Purpose Portable Heater 1 × USB-C Charger (5V, 3A) 1 × Standard Glass Aroma Tube (90mm) 1 × XL Glass Aroma Tube (90mm) 1 × Standard Frosted Glass Aroma Tube (14mm) 1 × XL Frosted Glass Aroma Tube (14mm) 2 × PVC Travel Tubes with Caps (90mm) 2 × PVC Travel Tubes with Caps (70mm) 4 × Silicone Stem Caps 4 × Stainless Steel Filter Screens 1 × Stainless Steel Stirring Tool 1 × Solo 3 Owner’s Manual Performance & Design The Solo 3 Version 2.0 combines advanced hybrid heating with a clean, modern design. The 80% convection / 20% conduction mix ensures efficient extraction and flavorful results. The durable aluminum body feels solid, while the OLED interface provides simple, intuitive control. The XL Glass Pod System enhances airflow and bowl capacity, creating a smooth, satisfying vapor experience that’s pure Arizer quality through and through. Why Choose the Arizer Solo 3 Version 2.0? This is Arizer’s most refined portable yet — ideal for anyone who values flavor, control, and instant performance. With precision temperature control, dual-use modes, and incredible battery life, it’s built for enthusiasts who want a truly reliable daily driver. At around $259 USD, the Solo 3 Version 2.0 offers elite-level performance and build quality that stands above the competition. Specifications Heating Type: Hybrid (80% convection / 20% conduction) Temperature Range: 122°F–428°F (50°C–220°C) Heat-Up Time: 5–15 seconds Battery Life: Up to 3 hours Charging: USB-C PD with pass-through use Airpath: Isolated, all-glass Body Material: Brushed aluminum Display: OLED (reversed white) Final Thoughts The Arizer Solo 3 Version 2.0 is a top-tier portable vaporizer that blends instant performance with premium design. Fast heat-up, exceptional flavor, and long battery life make it one of the best options available for dry herb enthusiasts. Reliable, clean, and built to last — it’s everything you want from an Arizer device. Check out our full review of the Arizer Solo 3 Version 2.0 here.

Read more less

Dr. Dabber Drop – The Heated Loading Tool Reimagined The Dr. Dabber Drop is the long-awaited evolution of the original heated loading tool—the iconic Budder Cutter, first released in 2014. Redesigned from the ground up, this next-generation tool makes loading sticky, hard-to-manage waxes and oils into your eRig, banger, or pen faster, cleaner, and more efficient than ever. The Successor to a Game-Changer This is more than just an update. The Dr. Dabber Drop is a complete reimagining of one of the most innovative concentrate tools ever created. With a sleeker design, better performance, and enhanced versatility, it delivers everything you loved about the original—plus a whole lot more. Multi-Use Compatibility Whether you’re using an electric dab rig, a traditional setup, or a vape pen, the Dr. Dabber Drop fits seamlessly into your routine. It’s the ideal solution for anyone tired of messy loading or wasting concentrates on sticky tools that just don’t work. Calibrated Heating That Won’t Waste Your Concentrates The Drop features a carefully calibrated heating element that delivers just the right amount of heat—enough to handle sticky extracts, but not enough to burn or vaporize your valuable concentrates. It heats up quickly and maintains a stable temperature throughout use. Two Heat Settings for Total Control With dual heat settings, the Dr. Dabber Drop gives you the flexibility to handle any concentrate type with confidence. Toggle between heat levels depending on the thickness or consistency of your wax or oil. Designed for Everyday Convenience It’s not just functional—it’s smart. The Dr. Dabber Drop features a magnetic cap that attaches to the back of the unit while in use, so you never lose it. And with USB-C charging (cable included), it’s always ready when you are. Features At a Glance Next-gen heated loading tool for concentrates Successor to the original Budder Cutter (2014) Works with eRigs, bangers, and vape pens Prevents waste—doesn’t burn or vaporize concentrates Dual heat settings for different concentrate types Magnetic cap and USB-C charging included

Read more less