Hot New Vaporizers & Accessories

DynaVap VonG X — High-Mass Power Meets Precision Control Engineered for serious performance, the DynaVap VonG X blends heavy-duty stainless-steel power, refined airflow, and unmatched versatility — all in one compact body. Overview The VonG X is DynaVap’s latest evolution — a precision-crafted manual vaporizer designed for water-pipe users and on-the-go enthusiasts alike. With its heaviest-ever stainless-steel tip and titanium body, it delivers smooth, consistent extractions that rival plug-in devices. Compact, durable, and fully adjustable, the VonG X is the definition of portable performance. Key Features & Upgrades High-Mass Tip — stores and releases heat for massive, single-hit extractions. Twist Airflow Control — fine-tune your draw with the new rotating mouthpiece. Reversible Design — use it traditionally or flip it for a hands-free water-pipe fit. Hybrid Titanium & Stainless Build — rugged, lightweight, and corrosion-resistant. Dual Compatibility — fits both 10 mm & 14 mm female joints out of the box. Adjust-a-Bowl Chamber — 0.1 g capacity that reduces by half for microdosing. Armored Cap Compatible — pair with DynaVap’s Armored Cap for maximum output. Two-Tone DuraDyn Finish — matte tapers with a polished midsection. Heating Methods The VonG X can be powered by either a butane torch or The Wand induction heater. A small torch provides manual control, while the induction option offers consistent, hands-free performance. Either way, the VonG X delivers clean, potent vapor in seconds. For maximum extraction, you can heat directly on the tip rather than the cap to drive heat deeper into the metal core. Just be careful — this method transfers energy fast. Adjusting Airflow Mouthpiece Control Simply twist the mouthpiece to open or close the airflow window. The mechanism offers infinite variability — not just on or off — allowing you to dial in your perfect resistance and vapor density. Condenser Tuning The condenser now connects directly to the tip, offering an extra layer of control. Push it closer to the mouthpiece for a tighter pull or slide it toward the tip for a freer flow. Whichever setup you choose, the airflow is smooth and whisper-quiet. Reversible Setup for Water-Pipe Use One of the VonG X’s most unique advantages is its reversible assembly. Swap the tip and mouthpiece positions to create a secure, hands-free fit for your favorite 14 mm water pipe. It’s designed for total flexibility — session after session. Specifications Length: 92 mm Materials: Titanium & Stainless Steel Bowl Capacity: ~0.1 g (Adjust-a-Bowl) Heating Method: Torch or Induction Compatibility: 10 mm & 14 mm female joints Airflow Control: Twist-to-adjust mouthpiece + tip-mounted condenser Finish: Two-tone DuraDyn (matte tapers, polished center) Included: VonG X Device, Captive Cap, O-rings, CCD Screen How It Works Load your ground material lightly into the chamber, ensuring smooth airflow. Heat the cap or tip evenly while rotating until you hear the signature DynaVap click. Once heated, insert the device into your water piece or draw directly — no buttons, batteries, or guesswork needed. The cap clicks again when it cools, letting you know it’s ready for the next cycle. Why Choose the VonG X The VonG X is a masterpiece of mechanical design — precise, powerful, and endlessly adaptable. It’s the ideal choice for anyone who values full manual control, water-pipe compatibility, and flavor that only stainless steel and titanium can deliver. Sneaky Pete Vaporizers proudly presents the DynaVap VonG X — a new benchmark for portable manual vaporizers. Built tough, engineered smart, and refined for flavor chasers and big-rip enthusiasts alike. Read our full in-depth review of DynaVap VonG X – Heavy-Duty Power & Precision Control here.

Read more less

DynaVap M7 TwoToniuM Meet TwoToniuM — the first two-tone Fall colour from DynaVap. With a sharp, dark-to-light contrast and all the performance of the latest M 7, this eye-catching, pocket-friendly device is built for flavour, efficiency, and total portability — no batteries required. Available in limited supply. Why you’ll love the M7 TwoToniuM Battery-free freedom: Heat with a butane torch or induction heater and enjoy anywhere, anytime. Durable by design: Medical-grade stainless steel, made in the USA. Flavour first: Thermal extraction unlocks terpene-rich vapour and clean taste. Use less, get more: Stretch your herb — many users report using >50% less material with excellent results. Discreet & modular: Palm-sized, pocket-ready, and compatible with DynaVap accessories. Who is the M7 for? Anyone who wants an exceptional dry herb experience — from microdosing to complete extractions — without electronics. M7 feature highlights Bigger rips & heat retention: A higher-mass tip and chamber for stronger, more controlled extractions. Finless tip, cooler fingers: Up to 20% less heat transfer from tip to stem. Even extractions: Refined mass distribution reduces scorching and hot spots. More airflow: Redesigned captive cap fitment + increased convection vs previous M models. Simple airflow control: New airport with “Pivot”-style rocker for on-the-fly tuning. Microdose-ready: “Adjust-a-bowl” halves the chamber size in seconds. Streamlined grip: Textured stem pattern for secure handling and a fresh look. Captive Cap “click”: Audible temperature cue for consistent, user-controlled sessions. How to use the M7 TwoToniuM Remove the Cap and load ground dry herb into the Tip chamber. Re-cap, then heat the Cap (not the stem) with a torch or induction heater until it clicks (about 5–7 seconds). Inhale from the mouthpiece. When the Cap clicks again, it has cooled. Re-heat for further extraction, or save your AVB for later uses. Tip: Cover or feather the airport to fine-tune vapour density and temperature draw-by-draw. Parts & build DynaVap Captive Cap Stainless Steel Tip: M 7 — TwoToniuM Stainless Steel Stem: M 7 — TwoToniuM Stainless Steel CCD (screen) High-temp O-rings (2) Stainless Steel Condenser + O-rings (2) What’s in the box DynaVap Tin Case DynaTorch (single flame / empty) Pink Slip Specs Bowl size ~0.1 g (adjust-a-bowl compatible) Material Medical-grade stainless steel Heat source Butane torch or induction heater (sold separately) Design Two-tone “TwoToniuM” finish; finless M7 tip; textured stem FAQ Is the M7 TwoToniuM good for microdosing? Yes. Use the adjust-a-bowl to reduce the chamber by half for efficient micro-loads. What’s the best heat source? It works with virtually any flame, but a quality butane torch or an induction heater delivers the best flavour and consistency. How do I control vapour? Feather the airport and experiment with heat placement/rotation on the Cap. The Captive Cap’s click gives a repeatable temperature cue.

Read more less

Crossing Heated Dab Tool (Hot Knife) Load clean. Drop clean. No mess. The Crossing Heated Dab Tool is the easy way to load sticky concentrates into your wax pen or e-rig without scraping the sides of the bowl. A ceramic hot-knife tip, three voltage levels, and simple one-button controls let you warm and release your dab with precision. It’s compact, USB-C rechargeable, and comes with a protective cap for pocket-safe carry. Key Features Heated ceramic tip for smooth, mess-free loading 3 voltages (Blue / Green / Red) to match different concentrate textures Two heat modes: quick cycle (double-click) or manual hold USB-C charging with included cable Protective cover cap for safe storage 550 mAh battery for plenty of reloads between charges One-button operation—fast to learn, easy to use Why You’ll Like It Less mess: Warm the tip and your dab slides cleanly into the chamber—no more hard scraping. Better control: Choose a lower level for softer waxes or higher for firmer concentrates like shatter. Pocket-friendly: Lightweight, capped, and ready to travel. How to Use the Crossing Heated Dab Tool Remove the glass/plastic cap. Power on: Press the button 5× to turn on (repeat to turn off). Select voltage: Press 3× to cycle Blue → Green → Red. Heat the tip: Quick cycle: Press 2× to start a short auto heat. Manual: Press & hold to heat while you load. Scoop your concentrate, hover over the chamber, then warm the tip—after a few seconds the dab will slide offcleanly. Replace the cap when finished and power off. Tip: Use Blue/low for most waxes; bump to Red/high for firmer textures. Battery & Charging The integrated 550 mAh battery delivers many reloads per charge. Top up with the included USB-C cable. As with any small device, actual run-time will vary by heat level and usage. Easy Cleaning While the tip is still warm (not red-hot), wipe it with a vape-safe cleaning wipe to remove residue. Keep the protective cap on during storage to extend tip life and prevent debris. Specifications Tip Ceramic heated “hot-knife” style Heat Levels 3 voltages (Blue / Green / Red) Controls 1 button • 5× power • 3× level • 2× cycle • hold to heat Battery 550 mAh (integrated) Charging USB-C Cap Included protective cover Use Case Loading wax pens & e-rig chambers What’s in the Box Crossing Heated Dab Tool (Hot Knife) Protective tip cover USB-C charging cable Owner’s manual FAQs Which heat level should I use? Start on Blue for softer waxes. If the dab doesn’t release cleanly, step up to Green or Red for firmer concentrates like shatter. How do I keep the tip clean? Wipe the tip while warm with a vape-safe cleaning wipe every few sessions. Avoid scraping with metal tools. Will it work with my wax pen or e-rig? Yes—this tool is brand-agnostic. It simply helps you transfer concentrates cleanly into most chambers. Is there an auto shut-off? The quick-cycle heat runs for a short, pre-set interval. Always power off when finished and replace the cap. Safety Notes The tip gets hot—keep away from skin, fabrics, and flammables. Allow the tip to cool before capping or cleaning. Charge with a quality USB-C cable and reputable power source. Store capped, out of reach of children and pets.

Read more less

Vector Mystique Single Flame Torch Lighter The Vector Mystique pairs a sleek, vertical profile with one of the most comfortable ignition systems we’ve used. At 3.37" tall, 0.78" wide, and 0.94" deep, it’s slim, pocket-friendly, and built from metal for everyday durability. Key Features Side-Lever Ignition: Low-effort, natural thumb press to ignite and hold the flame Ultra-Slim Vertical Design: Tall, narrow body for easy everyday carry Large Flame Dial: Oversized adjuster at the base—turn with thumb and finger (no tool needed) Metal Construction: Solid feel and long-lasting durability Stylish Finishes: Metallic blue or gunmetal satin The side-lever ignition is the star here: press the small metal lever that rests flush against the body to fire the torch, then keep it comfortably depressed as long as you need. Because you’re holding a lever—not pushing in or flicking sideways—it’s exceptionally easy on the thumb and a great choice for anyone with mobility or grip issues. With its slim profile, simple operation, and large, easy-to-use flame adjustment, the Vector Mystique is an outstanding everyday carry torch lighter that blends comfort, style, and performance.

Read more less

Vector Stratos Single Flame Torch Lighter The Vector Stratos is a single flame torch lighter that stands out with its bold steampunk-inspired design and durable metal build. Compact at 2.87" tall, 1.30" wide, and 0.73" deep, it blends eye-catching style with practical performance. Key Features Steampunk Aesthetic: Unique industrial design with tactile controls Protective Jet Cover: Prevents dust and debris from entering the flame jet One-Press Ignition: Single button both opens the cover and ignites the flame Metal Construction: Built to last with premium textured or glossy finishes Adjustable Flame: Screwdriver-friendly control at the base Unlike most lighters with exposed jets, the Stratos features a built-in protective cover that flips open as you ignite, keeping the torch clear and ready to use. The push-down ignition is highly tactile — one smooth press opens the cover and sparks the torch, making it feel as satisfying as it is functional. Available in a textured matte black finish or a glossy sparkle burgundy reminiscent of a sports car, the Vector Stratosdelivers both style and substance for anyone who wants their everyday carry lighter to stand out.

Read more less

Vector Summit Single Flame Torch Lighter The Vector Summit combines the classic feel of a flint ignition with the power of a modern butane torch. Measuring 3.38" tall, 0.88" wide, and just 0.67" deep, this slim vertical design is perfect for everyday carry while still offering serious performance. Key Features Flint Ignition: Traditional spark-wheel design with modern torch flame Slim Vertical Build: Compact, portable lighter with a narrow profile Adjustable Flame Dial: Fingernail or screwdriver-friendly control at the base Stylish Finishes: Available in gunmetal or bold red matte Everyday Carry Ready: Lightweight and highly portable design Instead of electronic ignition, the Vector Summit uses a classic flint-style spark wheel — just flick the wheel to spark, and the butane torch ignites with a clean, blue flame. This makes it a unique option for anyone who enjoys the tactile feel of a traditional lighter but wants the performance of a modern torch. Sleek, stylish, and pocket-friendly, the Vector Summit is ideal for everyday carry or anyone who appreciates a lighter that blends classic design with modern function.

Read more less

Vector Speed Single Flame Torch Lighter The Vector Speed is a compact and powerful single flame torch lighter that delivers reliable performance with smart features in a stylish design. Measuring just 3" tall, 2.5" wide, and 0.75" deep, it’s easy to carry while offering the quality Vector is known for. Key Features Angled Flame: 45° flame output for more comfortable lighting Flame Lock: Hands-free operation with simple thumb control Fuel Gauge: Transparent window shows butane level at a glance Large Adjustment Dial: Quickly fine-tune flame size from the base Stylish Finishes: Available in vibrant colour fade or matte black The intuitive thumb ignition makes the Vector Speed one of the easiest lighters to use. Just press down on the built-in safety, ignite with a push, and lock the flame on with an upward slide for continuous use. Whether you prefer the sleek matte finish or the eye-catching fade pattern, this lighter is designed to look sharp and work flawlessly. Built for portability and performance, the Vector Speed Torch Lighter is an excellent choice for anyone seeking a reliable single flame torch that’s easy to use and maintain. With Vector’s reputation for quality, you can count on it for years to come.

Read more less

The DynaVap B2 takes the original B concept and turns it up a notch — a larger 0.075 g bowl, an ultra-durable silicone stem, and the new DynaTorch lighter, all in one ready-to-go kit. Sorry, your browser doesn’t support embedded videos. Watch the DynaVap B2 in action — bigger bowl, better flavor, and built to travel. Overview The DynaVap B2 keeps the simplicity of the B but adds more power and polish. The 0.075 g bowl, stainless-steel airpath, and heat-resistant silicone stem create smooth, flavorful draws with minimal upkeep. The kit also ships with the new DynaTorch lighter and a protective tin case — everything you need to start fresh. Ships from the USA 🇺🇸 with fast, tracked delivery and American support from SneakyPeteStore.com. Key Features 0.075 g bowl: roughly 50% larger than the original B for richer sessions. Silicone stem: O-ring-free, anti-roll, and built to handle daily use. Stainless-steel airpath for clean taste and long-term durability. 10 mm water-pipe fit for cooler and smoother vapor. DynaTorch included — custom butane lighter inspired by the DynaVap cap. Protective tin case keeps your B2 and DynaTorch together on the go. Induction-heater compatible for hands-free heating options. Tip-swappable with other DynaVap tips for custom sessions. What’s Included 1 × DynaVap B2 device (silicone stem + stainless-steel tip & condenser) 1 × DynaTorch butane lighter 1 × Protective tin case (cap-inspired design) Performance & Design Portable and built to last, the DynaVap B2 offers precision manual heating with zero electronics. The soft-touch silicone stem stays cool while the steel airpath preserves purity of flavor. Pair it with a torch or induction heater for consistent results every time. B vs B2 — At a Glance Bowl Size: 0.075 g (~50% larger than the B) Tip Design: Refined geometry for better heat distribution Stem: Anti-roll silicone design with O-ring-free connection Lighter: DynaTorch included in every kit Case: Protective tin included for travel Specifications Bowl Capacity: 0.075 g (fixed) Stem Material: Silicone (O-ring-free design) Airpath: Stainless Steel Water-Piece Fit: 10 mm connection Heating Method: Butane torch (included) or induction heater Case: Cap-style protective tin Who It’s For The DynaVap B2 is ideal for anyone who wants a low-maintenance manual vaporizer that’s built to travel. It’s an affordable way to enter the DynaVap ecosystem without compromising flavor or build quality. Frequently Asked Questions What’s different about the B2? The B2 adds a larger bowl, refined tip, and silicone stem with anti-roll geometry plus the DynaTorch and protective case included in the box. Is the B2 induction-heater compatible? Yes — its stainless-steel tip and cap work with nearly all standard DynaVap-style induction heaters. Is the CCD adjustable? No — the 0.075 g bowl is fixed for easy, repeatable loads. Can I swap tips? Yes — most DynaVap tips fit securely on the B2 stem. Will it fit a water pipe? Yes — the 10 mm connection makes it ready for compact water cooling. Read our full in-depth review of DynaVap B2 Review (2025): Bigger Bowl, Silicone Stem & DynaTorch Included here.

Read more less