Portable Vaporizers

Arizer Go SRT Portable Vaporizer - Glass Flavor, Faster Heat, Premium Portable Design The Arizer Go SRT is a premium portable vaporizer built around a glass vapor path, hybrid heating, and Arizer’s new SRT system. It delivers clean flavor, faster heat-up, and stronger performance in a refined, travel-ready design. Overview The Arizer Go SRT blends the best of Arizer’s classic flavor-focused design with a more modern, performance-driven approach. It feels like a crossover between the original ArGo and the Solo 3, combining clean glass flavor with faster heat-up, stronger extraction, and a more refined build. While it is slightly larger than the original ArGo, the trade-off is clear. You get a more solid, more capable device that performs at a much higher level while still remaining easy to carry and use on the go. This is a portable dry herb vaporizer built for users who want consistency, control, and real performance in a compact format. With a glass vapor path, hybrid convection heating, and the new SRT operating system, the Go SRT delivers a balanced experience that works equally well for flavor-focused sessions or stronger, more dense output when you push it. Key Features Glass Vapor Path - clean, pure flavor with no unwanted taste from internal materials. SRT Operating System - faster heat-up and more consistent performance throughout the session. Hybrid Heating Chamber - convection-focused heating with added conduction for better early output. Go Shell Pod System - glass-based pre-load system for cleaner reloads and easier on-the-go use. 14mm Water Pipe Adapter - included for smoother high-temperature sessions. Precise Temperature Control - 50°C to 220°C (122°F to 428°F) in single-degree increments. 3 Custom Presets - save and switch between your preferred session setups instantly. USB-C Fast Charging - quick charge times with pass-through support. Eco Charging Mode - preserves long-term battery health by limiting charge to 80%. Full Color Display - bright, clear interface with customizable settings. Build Quality and Design The Go SRT takes a noticeable step up in build quality compared to earlier Arizer portables. The body uses a metal-heavy construction with carefully placed plastic and silicone components where they improve usability and durability. With the stem and protective cap installed, the device weighs around 240 to 250 grams and measures approximately 4.3 inches tall, 2.3 inches wide, and just over an inch deep. It pushes the upper limit of what most people would consider pocketable, but it remains practical for everyday carry. The magnetic travel cap is one of the standout design elements. It allows you to keep the short glass stem installed while protecting it during transport, and it can also attach to the bottom of the device when removed. The glass path is mostly recessed, which helps protect it compared to traditional exposed stem designs. How It Works The Go SRT uses a hybrid heating system that is primarily convection-based, with roughly a 75% convection and 25% conduction balance. This allows it to maintain the clean flavor Arizer is known for while improving how quickly the session gets going and how consistent it feels from start to finish. The new SRT system is designed to make the device feel faster and more responsive. Heat-up is quick, typically in the 15 to 25 second range, and the system is tuned to maintain steady output instead of dropping off after the first few draws. The display uses a simple bar system to show heat progress and session timing. Once fully heated, the device maintains temperature while the session timer counts down. After the session ends, residual heat remains available, allowing you to finish your load naturally instead of being cut off abruptly. Vapor Quality The Arizer Go SRT vapor quality stays true to the brand’s reputation for clean, smooth sessions. At lower temperatures, you get bright, terpene-rich flavor that holds up well across multiple draws. In the mid-range around 390°F, the device offers a strong balance of flavor and vapor density. At higher temperatures, especially above 405°F, it produces thicker vapor and more aggressive extraction, making the included water pipe adapter a great option for keeping things comfortable. While it begins producing vapor quickly after reaching temperature, it is common to see slightly thicker output on the second draw as the material continues to heat. Overall, it delivers an impressive balance of flavor, consistency, and cloud production for a device in this size category. Go Shell System The Go Shell system is a new approach from Arizer that allows you to preload material into small glass pods. This makes it easier to reload while on the go and helps keep the chamber cleaner over time. The system works well once you get used to it and offers a level of convenience that older Arizer models did not have. The included silicone grips help with handling the shells safely when they are hot and also double as a tamping tool. The only downside is that the internal metal screen does not lock into place, so you need to be slightly more careful when loading and emptying. Once properly packed, the shells perform well and maintain excellent flavor. Temperature Control and Presets The Go SRT gives you full control over your sessions with 1-degree temperature adjustment across the entire range. This allows you to dial in your preferred experience rather than relying on fixed presets. It also includes three customizable presets that store both temperature and session duration. Session times can be set from 20 seconds up to 5 minutes, allowing you to tailor the device for quick hits or longer sessions. The interface also includes settings for screen brightness, sound, vibration feedback, screen inversion for water pipe use, and overall shutoff timing. Once set up, it becomes a very flexible and easy-to-use system. Battery and Charging The Go SRT uses a 5000mAh battery that delivers solid performance for a device of this size. Most users can expect around 8 to 12 sessions per charge, depending on temperature and session length. Charging is handled through USB-C, with fast charging that can reach about 20% in 15 minutes and a full charge in approximately 2 hours. The device also supports pass-through charging, so you can continue using it while plugged in. The battery is user-replaceable using basic tools, which is a major advantage over fully sealed designs, even though it is not designed for quick battery swaps on the go. Specifications Brand Arizer Origin Canada Heating Style Hybrid (Convection Focused) Temperature Range 122°F to 428°F Battery 5000mAh Charging USB-C Fast Charging Heat-Up Time ~15 to 25 seconds Presets 3 Custom Presets Water Pipe Adapter 14mm Included What’s Included Arizer Go SRT Device Magnetic Travel Cap Go Shell with Grip Glass Aroma Tube 14mm Water Pipe Adapter Stirring Tool Cleaning Brush USB-C Charging Cable Filter Screens Travel Tubes FAQ - Arizer Go SRT Is this better than the original ArGo?Yes. It is larger, but it offers much better performance, faster heat-up, and a more premium build. Is it fully convection?It uses a hybrid system with a strong focus on convection for better flavor and consistency. Can it be used with water pieces?Yes. It includes a 14mm adapter and works very well with glass. How portable is it?It is still portable, but slightly larger than ultra-compact devices. Best suited for pocket or bag carry. Is the battery removable?It is user-replaceable but not designed for quick swapping. Final Thoughts The Arizer Go SRT portable vaporizer strikes one of the best balances between flavor, portability, and performance in the current lineup. It is not the smallest device, and it is not the most powerful Arizer ever made, but it may be the most complete. If you want a portable that delivers clean glass flavor, strong performance, and a premium feel in a travel-friendly design, the Go SRT is an excellent choice. Sneaky Pete Store - Trusted source for high-quality portable and desktop vaporizers and accessories. For more information, read our full review of the Arizer Go SRT here.

Read more less

Limelight Frolic Thermal Extractor is a high-performance device built for users who want precision, power, and full control in a refined package. Engineered from CNC-machined Ultem and PEEK, the Frolic blends modern design, strong thermal performance, and long-term durability into one seriously capable unit. With its 120W stainless steel heater, fully insulated PEEK airpath, adjustable airflow, and both session and on-demand modes, the Frolic is designed to adapt to the way you like to use it. Whether your priority is smooth flavour, dense extraction, or flexible control, this device is built to keep up. Watch the Limelight Frolic in Action If you want a closer look at the Frolic before buying, check out the embedded video above. It gives you a better feel for the design, size, airflow approach, and overall user experience. A good product page should do more than list specs - it should help you understand what makes the device worth owning. Why the Frolic Stands Out The Frolic is built around a simple idea: deliver serious performance without sacrificing usability. Its modular construction, replaceable battery, and precise airflow system give you a level of flexibility that a lot of devices simply do not offer. It feels purpose-built from top to bottom. 120W Heater and Fast Thermal Response At the core of the Frolic is a 120W stainless steel heater designed to move large volumes of heated air quickly and efficiently. This gives the device strong responsiveness and the ability to stay consistent across a wide range of draw speeds and styles. That translates into smooth, flavour-rich performance when you want to take it slow, or dense, aggressive extraction when you decide to push it harder. Full PEEK Airpath The Frolic uses a fully insulated PEEK airpath, which is a major part of what makes it feel so refined. PEEK is known for its stability under heat, excellent durability, and inert performance. It is a premium engineering material that helps keep the experience clean, consistent, and reliable over time. This is not just a spec-sheet feature. It is one of the details that helps separate the Frolic from more ordinary designs. Adjustable Airflow Control Airflow is fully adjustable from 0 to 25 L/min, giving you the ability to dial in draw resistance exactly the way you like it. By rotating the base of the mouthpiece, you can move from a tighter, more controlled draw to a wide-open, unrestricted inhale. The Frolic’s heater is powerful enough to keep pace no matter where you land, so you are not forced into one narrow sweet spot. Session Mode and On-Demand Mode Session Mode (40-220°C): Maintains temperature for a more relaxed, extended session. On-Demand Mode (40-240°C): Heats only when you press, giving you instant control and strong performance when you want it. This dual-mode setup gives the Frolic a lot of flexibility. You can use it casually, precisely, or aggressively depending on mood, material, and technique. Modular Design and Replaceable 21700 Battery The Frolic is designed to be taken apart and maintained without drama. Its modular construction makes cleaning, servicing, and long-term ownership much easier than devices built around sealed components and throwaway design choices. It runs on a Molicel P50B 21700 battery, which means when the battery eventually ages, you replace the cell instead of replacing the device. That is a better long-term solution and a smarter way to build premium hardware. Cooling Path and Water Piece Compatibility The extended cooling path helps deliver a smoother draw by giving the vapour more room to condition before it reaches the mouthpiece. For users who want even more cooling, optional 14mm and 18mm adapters make it easy to pair the Frolic with your favourite glass setup. The cooling unit breaks down into just three parts and is dishwasher-safe, which makes cleanup refreshingly straightforward. Key Features 120W stainless steel heater for fast, powerful thermal response Full PEEK airpath for clean and stable performance Adjustable airflow from 0-25 L/min Session and on-demand modes for flexible use Replaceable 21700 battery for long-term reliability Modular construction for easier maintenance and repair 0.96-inch colour OLED display with clear real-time info USB-C charging for convenient power delivery Specifications Dimensions: 105 × 63 × 24 mm Weight: 245 g (with battery) Body Materials: Ultem (PEI), PEEK Airpath Material: 100% PEEK Oven Capacity: ~0.25 g / 1.4 ccm Airflow Range: 0-25 L/min Heater: Stainless Steel 120W CTS Battery: Molicel P50B 5000 mAh Removable 21700 Input: 5.0 V = 2.0 A (USB-C) Screen: 0.96-inch Colour OLED What’s Included Limelight Frolic Thermal Extractor Molicel P50B Battery (installed) USB-C to USB-C Cable Cleaning Brush Silicone and FKM O-Ring Sets Mesh Screen Set User Manual Who Is the Frolic For? The Limelight Frolic is a great fit for users who want strong heater performance, precise airflow control, and a device that feels engineered rather than mass-produced. It is especially appealing to people who value durability, serviceability, and the flexibility to switch between relaxed sessions and more immediate, high-output use. Final Thoughts The Limelight Frolic is built with the kind of attention to detail that serious users appreciate. It is powerful, versatile, easy to maintain, and thoughtfully designed from the inside out. If you want a premium thermal extractor that delivers both performance and long-term usability, the Frolic deserves a serious look. Read the full review: Limelight Frolic First Impressions - On-Demand Power and Massive Airflow

Read more less

DynaVap UniDyn Captive - Titanium UniBody Thermal Extraction Device Ultra-light titanium UniBody design with adjustable airflow, microdose flexibility, and classic Captive Cap simplicity. The DynaVap UniDyn Captive introduces a fully integrated titanium UniBody design that seamlessly combines the tip and stem into a single precision-machined component. By reducing parts and eliminating traditional tip O-rings, the UniDyn delivers improved durability, simplified maintenance, and a refined flavour-first experience. Finished with DynaVap’s scratch-resistant DuraDyn coating and built around the innovative T-Break heat break technology, the UniDyn minimizes heat transfer up the stem while preserving comfortable handling and consistent performance session after session. UniBody Titanium Simplicity The integrated titanium construction keeps the UniDyn incredibly lightweight while increasing long-term durability. With fewer removable components and only two O-rings in the entire device, maintenance is minimal and reliability is maximized. Customizable Airflow and Extraction The adjustable condenser provides 7 airflow settings, allowing you to fine tune draw resistance, vapour density, and session style. Combined with the intuitive airport placement, the UniDyn supports both relaxed flavour pulls and denser extraction techniques. Microdose Ready with Adjust-a-Bowl The built-in Adjust-a-Bowl system allows you to switch between a full 0.1 g chamber and a reduced microdose configuration around 0.05 g. This flexibility makes the UniDyn equally suited for efficient solo sessions or traditional full extractions. Water Piece Compatibility The tapered mouthpiece fits directly into 10mm glass adapters, making it easy to pair the UniDyn with your favourite water pieces for cooler, smoother sessions without requiring additional accessories. Features Integrated titanium UniBody - tip and stem combined into one seamless component DuraDyn finish - scratch-resistant surface with improved grip and longevity T-Break heat break technology - reduces heat transfer for comfortable handling 7 airflow settings - adjustable condenser for personalized draw control Adjust-a-Bowl system - supports full sessions and efficient microdosing 10mm compatibility - built-in taper for direct water piece use Minimal maintenance design - only two O-rings throughout the device What’s Included DynaVap Signature Captive Cap UniDyn Titanium UniBody Tip and Stem Stainless Steel CCD Screen Titanium Condenser Assembly High Temperature O-Rings (2) DynaVap Tin Storage Case Pink Slip How to Use Remove the Captive Cap and load material into the chamber Replace the Cap and heat with a torch or induction heater until it clicks Inhale from the mouthpiece and control airflow using the airport Wait for the cool-down click before reheating for additional extraction Why Choose the UniDyn Captive? The UniDyn Captive focuses on flavour purity, simplicity, and durability. Its titanium UniBody construction, adjustable airflow, and microdose flexibility create a refined manual experience that feels both modern and familiar - making it an excellent choice for both longtime DynaVap users and anyone exploring premium thermal extraction. Sneaky Pete Vaporizers - Trusted source for DynaVap devices, accessories, and performance upgrades.

Read more less

DynaVap VonG X — High-Mass Power Meets Precision Control Engineered for serious performance, the DynaVap VonG X blends heavy-duty stainless-steel power, refined airflow, and unmatched versatility — all in one compact body. Overview The VonG X is DynaVap’s latest evolution — a precision-crafted manual vaporizer designed for water-pipe users and on-the-go enthusiasts alike. With its heaviest-ever stainless-steel tip and titanium body, it delivers smooth, consistent extractions that rival plug-in devices. Compact, durable, and fully adjustable, the VonG X is the definition of portable performance. Key Features & Upgrades High-Mass Tip — stores and releases heat for massive, single-hit extractions. Twist Airflow Control — fine-tune your draw with the new rotating mouthpiece. Reversible Design — use it traditionally or flip it for a hands-free water-pipe fit. Hybrid Titanium & Stainless Build — rugged, lightweight, and corrosion-resistant. Dual Compatibility — fits both 10 mm & 14 mm female joints out of the box. Adjust-a-Bowl Chamber — 0.1 g capacity that reduces by half for microdosing. Armored Cap Compatible — pair with DynaVap’s Armored Cap for maximum output. Two-Tone DuraDyn Finish — matte tapers with a polished midsection. Heating Methods The VonG X can be powered by either a butane torch or The Wand induction heater. A small torch provides manual control, while the induction option offers consistent, hands-free performance. Either way, the VonG X delivers clean, potent vapor in seconds. For maximum extraction, you can heat directly on the tip rather than the cap to drive heat deeper into the metal core. Just be careful — this method transfers energy fast. Adjusting Airflow Mouthpiece Control Simply twist the mouthpiece to open or close the airflow window. The mechanism offers infinite variability — not just on or off — allowing you to dial in your perfect resistance and vapor density. Condenser Tuning The condenser now connects directly to the tip, offering an extra layer of control. Push it closer to the mouthpiece for a tighter pull or slide it toward the tip for a freer flow. Whichever setup you choose, the airflow is smooth and whisper-quiet. Reversible Setup for Water-Pipe Use One of the VonG X’s most unique advantages is its reversible assembly. Swap the tip and mouthpiece positions to create a secure, hands-free fit for your favorite 14 mm water pipe. It’s designed for total flexibility — session after session. Specifications Length: 92 mm Materials: Titanium & Stainless Steel Bowl Capacity: ~0.1 g (Adjust-a-Bowl) Heating Method: Torch or Induction Compatibility: 10 mm & 14 mm female joints Airflow Control: Twist-to-adjust mouthpiece + tip-mounted condenser Finish: Two-tone DuraDyn (matte tapers, polished center) Included: VonG X Device, Captive Cap, O-rings, CCD Screen How It Works Load your ground material lightly into the chamber, ensuring smooth airflow. Heat the cap or tip evenly while rotating until you hear the signature DynaVap click. Once heated, insert the device into your water piece or draw directly — no buttons, batteries, or guesswork needed. The cap clicks again when it cools, letting you know it’s ready for the next cycle. Why Choose the VonG X The VonG X is a masterpiece of mechanical design — precise, powerful, and endlessly adaptable. It’s the ideal choice for anyone who values full manual control, water-pipe compatibility, and flavor that only stainless steel and titanium can deliver. Sneaky Pete Vaporizers proudly presents the DynaVap VonG X — a new benchmark for portable manual vaporizers. Built tough, engineered smart, and refined for flavor chasers and big-rip enthusiasts alike. Read our full in-depth review of DynaVap VonG X – Heavy-Duty Power & Precision Control here.

Read more less

DynaVap M7 TwoToniuM Meet TwoToniuM — the first two-tone Fall colour from DynaVap. With a sharp, dark-to-light contrast and all the performance of the latest M 7, this eye-catching, pocket-friendly device is built for flavour, efficiency, and total portability — no batteries required. Available in limited supply. Why you’ll love the M7 TwoToniuM Battery-free freedom: Heat with a butane torch or induction heater and enjoy anywhere, anytime. Durable by design: Medical-grade stainless steel, made in the USA. Flavour first: Thermal extraction unlocks terpene-rich vapour and clean taste. Use less, get more: Stretch your herb — many users report using >50% less material with excellent results. Discreet & modular: Palm-sized, pocket-ready, and compatible with DynaVap accessories. Who is the M7 for? Anyone who wants an exceptional dry herb experience — from microdosing to complete extractions — without electronics. M7 feature highlights Bigger rips & heat retention: A higher-mass tip and chamber for stronger, more controlled extractions. Finless tip, cooler fingers: Up to 20% less heat transfer from tip to stem. Even extractions: Refined mass distribution reduces scorching and hot spots. More airflow: Redesigned captive cap fitment + increased convection vs previous M models. Simple airflow control: New airport with “Pivot”-style rocker for on-the-fly tuning. Microdose-ready: “Adjust-a-bowl” halves the chamber size in seconds. Streamlined grip: Textured stem pattern for secure handling and a fresh look. Captive Cap “click”: Audible temperature cue for consistent, user-controlled sessions. How to use the M7 TwoToniuM Remove the Cap and load ground dry herb into the Tip chamber. Re-cap, then heat the Cap (not the stem) with a torch or induction heater until it clicks (about 5–7 seconds). Inhale from the mouthpiece. When the Cap clicks again, it has cooled. Re-heat for further extraction, or save your AVB for later uses. Tip: Cover or feather the airport to fine-tune vapour density and temperature draw-by-draw. Parts & build DynaVap Captive Cap Stainless Steel Tip: M 7 — TwoToniuM Stainless Steel Stem: M 7 — TwoToniuM Stainless Steel CCD (screen) High-temp O-rings (2) Stainless Steel Condenser + O-rings (2) What’s in the box DynaVap Tin Case DynaTorch (single flame / empty) Pink Slip Specs Bowl size ~0.1 g (adjust-a-bowl compatible) Material Medical-grade stainless steel Heat source Butane torch or induction heater (sold separately) Design Two-tone “TwoToniuM” finish; finless M7 tip; textured stem FAQ Is the M7 TwoToniuM good for microdosing? Yes. Use the adjust-a-bowl to reduce the chamber by half for efficient micro-loads. What’s the best heat source? It works with virtually any flame, but a quality butane torch or an induction heater delivers the best flavour and consistency. How do I control vapour? Feather the airport and experiment with heat placement/rotation on the Cap. The Captive Cap’s click gives a repeatable temperature cue.

Read more less

The DynaVap B2 takes the original B concept and turns it up a notch — a larger 0.075 g bowl, an ultra-durable silicone stem, and the new DynaTorch lighter, all in one ready-to-go kit. Sorry, your browser doesn’t support embedded videos. Watch the DynaVap B2 in action — bigger bowl, better flavor, and built to travel. Overview The DynaVap B2 keeps the simplicity of the B but adds more power and polish. The 0.075 g bowl, stainless-steel airpath, and heat-resistant silicone stem create smooth, flavorful draws with minimal upkeep. The kit also ships with the new DynaTorch lighter and a protective tin case — everything you need to start fresh. Ships from the USA 🇺🇸 with fast, tracked delivery and American support from SneakyPeteStore.com. Key Features 0.075 g bowl: roughly 50% larger than the original B for richer sessions. Silicone stem: O-ring-free, anti-roll, and built to handle daily use. Stainless-steel airpath for clean taste and long-term durability. 10 mm water-pipe fit for cooler and smoother vapor. DynaTorch included — custom butane lighter inspired by the DynaVap cap. Protective tin case keeps your B2 and DynaTorch together on the go. Induction-heater compatible for hands-free heating options. Tip-swappable with other DynaVap tips for custom sessions. What’s Included 1 × DynaVap B2 device (silicone stem + stainless-steel tip & condenser) 1 × DynaTorch butane lighter 1 × Protective tin case (cap-inspired design) Performance & Design Portable and built to last, the DynaVap B2 offers precision manual heating with zero electronics. The soft-touch silicone stem stays cool while the steel airpath preserves purity of flavor. Pair it with a torch or induction heater for consistent results every time. B vs B2 — At a Glance Bowl Size: 0.075 g (~50% larger than the B) Tip Design: Refined geometry for better heat distribution Stem: Anti-roll silicone design with O-ring-free connection Lighter: DynaTorch included in every kit Case: Protective tin included for travel Specifications Bowl Capacity: 0.075 g (fixed) Stem Material: Silicone (O-ring-free design) Airpath: Stainless Steel Water-Piece Fit: 10 mm connection Heating Method: Butane torch (included) or induction heater Case: Cap-style protective tin Who It’s For The DynaVap B2 is ideal for anyone who wants a low-maintenance manual vaporizer that’s built to travel. It’s an affordable way to enter the DynaVap ecosystem without compromising flavor or build quality. Frequently Asked Questions What’s different about the B2? The B2 adds a larger bowl, refined tip, and silicone stem with anti-roll geometry plus the DynaTorch and protective case included in the box. Is the B2 induction-heater compatible? Yes — its stainless-steel tip and cap work with nearly all standard DynaVap-style induction heaters. Is the CCD adjustable? No — the 0.075 g bowl is fixed for easy, repeatable loads. Can I swap tips? Yes — most DynaVap tips fit securely on the B2 stem. Will it fit a water pipe? Yes — the 10 mm connection makes it ready for compact water cooling. Read our full in-depth review of DynaVap B2 Review (2025): Bigger Bowl, Silicone Stem & DynaTorch Included here.

Read more less

DynaVap G3 – Battery-Free Glass Vaporizer for Dry Herb The Purest Way to Vape, Now Under $35 Experience Thermal Freedom No batteries. No buttons. No nonsense. The DynaVap G3 brings back the joy of pure, direct vaporization—with just a torch and a flick of the wrist. Built around the power of thermal extraction, this all-glass portable vaporizer delivers rich flavour and smooth hits in seconds. Whether you're a microdoser, minimalist, or just tired of charging, the G3 keeps it simple without cutting corners. Why Choose the G3? Battery-Free by Design – Heat it with a torch - no cables, no chargers, no waiting. Glass-on-Glass Purity – A unibody stem and tip combo built from quality glass for clean flavour and easy maintenance. Captive Cap Technology – Audible “click” lets you know exactly when it’s ready—no guesswork, no overheating. Tri-Lobe Stem – Anti-roll design keeps your G3 from slipping off the table and onto the floor. Pocket-Sized Efficiency – The G3 tin case fits anywhere. Just toss it in your pocket, heat it up, and go. Simplify Your Session Load the chamber with just a pinch - around 0.05g is all it takes. Then cap it, heat it, and inhale. The G3’s click-to-vape system means you don’t need to guess when it’s ready. It’s fast, efficient, and designed to stretch your herb further than you thought possible. Want a stronger hit? Just let it soak up a few more seconds of heat, then ride the clouds. What’s in the Box? 1 × G3 Glass UniBody (tip + stem) 1 × Stainless Steel Captive Cap 1 × Clipper Torch Lighter (USA only) 1 × Slim Metal Storage Tin Recommended Tips Heat the cap evenly near the tip until you hear the first “click.” Inhale slowly for best vapour density and flavour. Listen for the second “click” to know when it’s cooling down. For stronger hits, heat for an extra second or two after the first click. Lightweight. Portable. Powerful. The DynaVap G3 isn’t just a budget-friendly entry into the world of dry herb vaporization - it’s a fully capable, highly efficient tool in a glass package. Whether you’re new to vaping or just want something simple and effective, this is one of the best value buys under $40. Perfect For: Anyone new to vaporizing looking for an easy entry point Fans of clean flavour and full manual control Microdosers and budget-conscious users People who hate charging and just want to heat and go Ready to Cut the Cord? Step away from batteries and into total control. The DynaVap G3 is your new go-to for flavourful, on-demand thermal extraction—whenever and wherever you want it. No batteries. No limits. Just glass, flame, and performance. Read our full DynaVap G3 review here.

Read more less

Ceramo XL – The Pinnacle of Battery-Free Convection Welcome to a new standard in dry herb vaporization. The Ceramo XL is a precision-engineered convection device built for purists who value clean flavour, efficient extraction, and rock-solid durability. It’s designed to outperform traditional vaporizers — all without batteries or electronics. One-Piece Zirconia Construction The Ceramo XL is machined from a solid block of black zirconia — a tough, heat-resistant ceramic known for its stability and neutral flavour. Its friction-fit screen and no-o-ring design reduces maintenance and keeps performance consistent session after session. Designed for Performance, Built to Last Ceramic Airpath – Smooth airflow with minimal heat soak or flavour distortion Ultra-High-Flow (UHF) Stem – Built for strong, easy draws and fast clearing Heater Plate Matrix – Optimized for deep, even convection extraction 0.2g Chamber Capacity – Wide and shallow for easy loading and quick clearing 14mm Male Taper – Compatible with your favourite glass pieces Replaceable Metal Screen – Friction-fit for easy cleaning or swapping How to Use the Ceramo XL Loosely fill the chamber with a medium grind of dry herb. Place the XL Camo Cap onto the heater end of the device. Apply heat to the tip using a torch or the Inductor. Heat for 4–7 seconds (Inductor) or 7–15 seconds (torch). Inhale gently from the stem. Rotate and reheat for 2–3 cycles to fully extract your material. What’s Included 1 x Ceramo XL (Black Zirconia) 1 x XL Camo Cap 1 x Replaceable Metal Chamber Screen 1 x Bambox Storage Case 1 x Burner Torch Lighter 1 x Cap Adjustment Tool Inspired by the Convector XL The Ceramo XL expands on the proven design of the Convector XL, delivering even greater airflow, upgraded materials, and a simplified, o-ring-free structure. It retains the trusted heater matrix and 14mm taper while pushing flavour and form to the next level. Why Choose Ceramo XL? Ceramic Airpath – Smooth flavour and high heat resistance Low Maintenance – No o-rings or fragile seals Fast Extraction – Full sessions in 2–3 heat cycles Glass Ready – 14mm taper fits water pieces right out of the box If you’re ready for high-performance convection without batteries or complexity, the Ceramo XL is your next move.

Read more less

Big vapor, compact form. The Healthy Rips FURY 3 delivers pure convection heat, rapid performance, and true flavor from a palm-sized device that means business. Sorry, your browser doesn’t support embedded videos. See the FURY 3 in action — full convection performance, ultra-portable size. Overview The Healthy Rips FURY 3 is a compact, high-performance convection vaporizer designed for flavor and efficiency. With a 25-second heat-up time, pure vapor path, and durable pocket-sized build, it delivers desktop-quality results in a travel-ready package. Ships from the USA 🇺🇸 with fast, tracked delivery and reliable support from SneakyPeteStore.com. Key Features 25-Second Heat-Up: Lightning-fast warm-up for quick sessions anywhere. Convection Heating: Hot-air convection with a hint of radiant heat for even extractions. Pure Vapor Path: Titanium chamber and glass stem for clean, flavorful vapor. Ultra-Portable Design: Small, durable, and discreet for everyday carry. Water-Pipe Ready: Drives thick clouds through your favorite glass piece. What’s in the Box 1 × FURY 3 Device 1 × Protective Travel Cover 1 × Standard Mouthpiece (for glass accessories) 1 × XL Glass Cooling Stem (3" / 80 mm) 1 × Dosing Capsule 1 × USB-C Charging Cable 1 × Extra O-Ring & Screen Set 1 × Cleaning Tool 1 × Cleaning Brush 1 × Tweezers 1 × User Manual Performance & Design The FURY 3 delivers true convection performance with exceptional consistency. Its titanium oven and glass cooling stem create smooth, flavorful vapor while keeping maintenance simple. Compact yet powerful, it’s built for travelers and daily users alike who demand real results from a small package. Warranty Includes a One-Year Free Replacement Warranty backed directly by Healthy Rips. Who It’s For The FURY 3 is ideal for anyone who values flavor, speed, and portability. Whether it’s your first vaporizer or your next go-anywhere setup, it brings serious performance and clean convection power in the palm of your hand. Frequently Asked Questions How fast does the FURY 3 heat up? It reaches full temperature in around 25 seconds — fast enough for quick solo sessions. What type of heating does it use? The FURY 3 is primarily convection-based, using hot air for smooth, even extractions. Can I use it with glass water pipes? Absolutely — it’s powerful enough to handle 14 mm or 18 mm adapters with ease. What’s inside the vapor path? All premium materials: titanium, stainless steel, and glass. No plastic or silicone in the airpath. What kind of warranty does it include? Each unit comes with a one-year free replacement warranty from Healthy Rips. Read our full in-depth review of FURY 3 Vaporizer Review: Convection Power in a Truly Pocket-Sized Package here.

Read more less

Arizer Solo 3 Version 2.0 — Premium Portable Dry Herb Vaporizer 🌿 Fast, flavorful, and powerful — the Arizer Solo 3 Version 2.0 takes portable vapor to a whole new level. Sorry, your browser doesn’t support embedded videos. Overview The Arizer Solo 3 Version 2.0 is the latest evolution in Arizer’s renowned lineup, offering instant heating, full customization, and a pure glass vapor path for outstanding flavor and performance. Designed for both newcomers and connoisseurs, it delivers power, purity, and precision in a compact form. Key Features Instant Heating: Heats up in just 5–15 seconds using hybrid ceramic convection technology. Dual Modes: Choose between Session Mode for longer draws or On-Demand Mode for quick, dense hits. Precise Temperature Control: Adjustable from 122°F–428°F (50°C–220°C) in 1° or 10° increments. Pure Glass Vapor Path: Isolated airpath and XL Glass Pod System deliver smooth, flavorful vapor. Long Battery Life: Up to 3 hours of use with fast USB-C PD charging and pass-through capability. Premium Build: Sleek brushed aluminum body with the new “Sea of Green” finish and a reversed OLED display. Canadian Engineering: Designed and built by Arizer, known for precision and reliability. What’s Included 1 × Solo 3 Version 2.0 Multi-Purpose Portable Heater 1 × USB-C Charger (5V, 3A) 1 × Standard Glass Aroma Tube (90mm) 1 × XL Glass Aroma Tube (90mm) 1 × Standard Frosted Glass Aroma Tube (14mm) 1 × XL Frosted Glass Aroma Tube (14mm) 2 × PVC Travel Tubes with Caps (90mm) 2 × PVC Travel Tubes with Caps (70mm) 4 × Silicone Stem Caps 4 × Stainless Steel Filter Screens 1 × Stainless Steel Stirring Tool 1 × Solo 3 Owner’s Manual Performance & Design The Solo 3 Version 2.0 combines advanced hybrid heating with a clean, modern design. The 80% convection / 20% conduction mix ensures efficient extraction and flavorful results. The durable aluminum body feels solid, while the OLED interface provides simple, intuitive control. The XL Glass Pod System enhances airflow and bowl capacity, creating a smooth, satisfying vapor experience that’s pure Arizer quality through and through. Why Choose the Arizer Solo 3 Version 2.0? This is Arizer’s most refined portable yet — ideal for anyone who values flavor, control, and instant performance. With precision temperature control, dual-use modes, and incredible battery life, it’s built for enthusiasts who want a truly reliable daily driver. At around $259 USD, the Solo 3 Version 2.0 offers elite-level performance and build quality that stands above the competition. Specifications Heating Type: Hybrid (80% convection / 20% conduction) Temperature Range: 122°F–428°F (50°C–220°C) Heat-Up Time: 5–15 seconds Battery Life: Up to 3 hours Charging: USB-C PD with pass-through use Airpath: Isolated, all-glass Body Material: Brushed aluminum Display: OLED (reversed white) Final Thoughts The Arizer Solo 3 Version 2.0 is a top-tier portable vaporizer that blends instant performance with premium design. Fast heat-up, exceptional flavor, and long battery life make it one of the best options available for dry herb enthusiasts. Reliable, clean, and built to last — it’s everything you want from an Arizer device. Check out our full review of the Arizer Solo 3 Version 2.0 here.

Read more less

DynaVap UniDyn – The Ultimate Convection Vape Experience The DynaVap UniDyn is the next evolution in thermal extraction, designed for pure flavour, enhanced efficiency, and hassle-free maintenance. Crafted from lightweight titanium, the UniDyn is DynaVap’s first-ever integrated unibody design, combining the tip and stem into one seamless unit. This groundbreaking design reduces parts, simplifies upkeep, and improves durability—all while delivering a next-level convection experience with the BallR Cap. What Makes the UniDyn Special? Fully Integrated Titanium UniBody – The first DynaVap to feature a tip and stem in one, eliminating O-rings and reducing maintenance. BallR Cap Included – Comes preloaded with stainless steel balls that enhance convection heating, improving flavour and efficiency. Adjust-a-Bowl for Microdosing – Customize your session size by adjusting the CCD screen to hold as little as 0.05g of dry herb. 7-Setting Adjustable Airflow – Easily fine-tune your draw with precise control over vapour production and density. DuraDyn Finish for Enhanced Durability – A scratch-resistant, cross-hatch texture that improves grip and longevity. 10mm Water Pipe Compatibility – The built-in mouthpiece fits directly into 10mm glass adapters for water filtration. Why Choose the UniDyn? 1. Convection Power with the BallR Cap The included BallR Cap takes performance to the next level by retaining heat in the stainless steel balls, delivering a stronger, smoother, and more efficient convection experience. Unlike traditional DynaVap caps that rely on conduction, the BallR Cap focuses on convection—meaning better flavour, stronger effects, and more complete extractions. 2. Ultra-Lightweight Titanium Design The UniDyn’s medical-grade titanium construction keeps it incredibly light, yet highly durable. The unique DuraDyn finish makes it even more resistant to scratches and wear while adding a satisfying texture for better grip. 3. Simple, Efficient, and Built to Last Fewer parts mean less maintenance—no more O-rings on the tip. Microdose-friendly with the Adjust-a-Bowl feature. The HypoTherm heat break reduces heat transfer up the stem for a more comfortable session. How to Use the UniDyn Remove the BallR Cap and load your dry herb into the titanium bowl. Reattach the Cap and heat it with a torch or induction heater until it clicks. Inhale and enjoy—the convection-focused design delivers unmatched flavour and vapour quality. The Cap clicks again when it cools, letting you know it’s ready for another heat cycle. FAQs About the UniDyn Q: How is the UniDyn different from other DynaVap models?A: The one-piece UniBody design eliminates the separate tip and stem, reducing parts and making maintenance easier. It also features adjustable airflow for customization. Q: Can I use a standard DynaVap cap instead of the BallR Cap?A: Yes, but using a standard cap may lead to additional heat transfer up the stem. The BallR Cap is optimized for convection vaping. Q: Is the UniDyn compatible with water pipes?A: Yes! The mouthpiece fits 10mm glass adapters for easy water filtration. Q: How much herb can the UniDyn hold?A: The Adjust-a-Bowl feature lets you switch between 0.1g and 0.05g for full sessions or microdosing. Q: What makes the DuraDyn finish special?A: Unlike traditional coatings, DuraDyn is infused into the titanium, making it more durable, scratch-resistant, and comfortable in your hand. Why the UniDyn is one of the Best DynaVaps Yet Better flavour with convection heating. Fewer parts for easier maintenance. Lightweight, durable titanium with DuraDyn finish. More customization with airflow settings and bowl size. BallR Cap included for enhanced heat retention and flavour. The UniDyn is the most refined and efficient DynaVap yet, bringing top-tier convection performance to a lightweight, ultra-durable design. If you want better flavour, smoother vapour, and effortless maintenance, the UniDyn is the ultimate upgrade.

Read more less

Introducing the Vapman Click – The Future of Flame-Powered Vaping The Vapman has always been a standout in the world of flame-powered vaporizers, known for its rapid heat-up time, exceptional flavour, and satisfying performance. Now, with the release of the Vapman Click, this iconic device has taken a revolutionary leap forward. Click-Back Mechanism for Perfect Precision Say goodbye to guesswork. The innovative Clickback mechanism transforms the Vapman experience by providing audible feedback for your heating cycle. Heat the device until it clicks, inhale, and then stop when it clicks back into its original position. This groundbreaking feature ensures every session is consistent, simple, and satisfying—no counting or wondering required. Double the Capacity for Bigger Hits The Vapman Click is designed with a significantly larger herb chamber of 0.2g, making it perfect for longer sessions. Whether you're seeking full-bodied clouds or smooth, flavour-packed draws, the increased capacity and enhanced performance cater to all preferences. Fully Adjustable Airflow Control Customise your experience with precision. The Vapman Click’s adjustable airflow allows you to fine-tune your sessions. From thick, dense vapour with a closed airflow to fresh, airy hits with it wide open, the choice is yours. Masterful Craftsmanship and Premium Materials Handcrafted from a variety of exceptional wood options, the Vapman Click combines natural beauty with exceptional durability. Its three-part construction—featuring a mouthpiece, middle piece for adjustable airflow, and a heart piece housing the gold-plated copper oven—ensures efficient heat transfer and an unforgettable flavour experience. Effortless Performance for Everyone Analogue devices can seem daunting, but the Vapman Click’s new features make it user-friendly and approachable. The Clickback mechanism eliminates the learning curve, giving both beginners and seasoned users a consistent and enjoyable session every time. Portable Perfection Weighing just 25g and standing only 2.5” tall, the Vapman Click is as portable as it is powerful. Its compact size and protective case make it the ideal companion for vaping on the go. Experience the Evolution The Vapman Click delivers smooth, flavourful vapour with every use. Built for seamless performance, enhanced convenience, and lasting durability, it’s the next generation of flame-powered vaporizers. Take your sessions to the next level with the Vapman Click—designed to maximize taste, ease, and enjoyment, wherever you go. Meet the Vapman Click—the portable vaporizer designed for precision and ease, delivering consistent, flavourful vapour with no guesswork. Read our blog for an in-depth review and user guide to see why it’s a must-have for effortless vaporization.

Read more less

Healthy Rips Rogue 2 Vaporizer: High Performance, Great Value The Rogue 2 offers a perfect combination of power, convenience, and affordability for both beginner and advanced users. Built for those seeking top-tier vapour quality, extended battery life, and an excellent form factor, the Rogue 2 stands as one of the best-value vaporizers on the market. More Power, Titanium Chamber, and Limited Edition Black Chrome Designed on the proven platform of Healthy Rips’ popular devices, the Rogue 2 integrates major upgrades for an even better experience. It features a 30% larger heating element, a titanium chamber for cleaner sessions, and a sleek limited-edition black chrome finish that combines durability with style. The larger 12mm chamber and 3000mAh battery mean longer sessions and fewer reloads, with rapid USB-C charging to get you back in action fast. Advanced Convection Heating Technology - Massive Vapour Output The Rogue 2's convection technology combines hot air convection with mild conduction heating, delivering powerful vapour from the first draw. This technology provides consistent, even extraction without needing to stir, making every session smooth and efficient. Whether you prefer short sips or deep draws, the Rogue 2 is engineered to handle it. Premium Build and Safety Features The Rogue 2 is crafted with an alloy unibody, an isolated glass air path, and food-grade stainless steel to ensure both safety and performance. The titanium chamber and stainless steel heating coil ensure lasting quality while maintaining safety standards (RoHS and CE certified). Key Features of the Rogue 2 - 30% Larger Heating Element for increased power - Titanium Chamber for pure flavour and durability - Advanced Convection Heating for consistent vapour - Low Draw Resistance and Haptic Feedback - OLED Digital Flip Screen and Precision Temperature Control (280°-430°F) - Fast USB-C Charging: Recharges in ~90 minutes for up to 100 minutes of use and use while charging What’s Included - Rogue 2 Device - Protective Travel Cover - Glass Cooling Stem and XL Glass Cooling Stem - Dosing Capsule - USB-C Charging Cord - Cleaning Tools and Accessories - 1 Year Warranty For anyone looking to upgrade to a capable, all-in-one vaporizer at an excellent price, the Rogue 2 is an outstanding choice. Discover the Healthy Rips Rogue—an ultra-powerful, pocket-sized vaporizer designed for unmatched performance and portability. Visit our blog for a detailed review and user guide to see why it’s the ultimate choice for on-the-go vaporization.

Read more less

The Bowle 2 From Tafee – Here’s to Feeling Good all the Time Oh, Canada! We’re always proud to show off amazing new products from the wonderful folks north of the 49th parallel, and this offering from Tafee is crazy innovative while bringing it from every angle on this peculiar little device. Picture if you will, you’ve just entered a bar and you’re trying to convince a mark sitting at the bar that you’re not just some hipster dufus, you’re as cool as they come. You pull out your Tafee Bowle 2, give the gentleman a nod as you load it up, put a glass on top and hit the Bowle 2 from both ends: as a top-of-the-line vaporizer and as the wildest drink receptacle you’ve ever seen. Giddy up, indeed. Thoughtfully Engineered Design that Executes Exceptionally Made and assembled in Canada, a surprise these days, the Tafee Bowle 2 is a curious little fellow, but a perfect option for someone searching for eccentricities while still having a consistent, fast heating device with a surprisingly long battery life. This unique device heats up very quickly and has some unexpected customization options that have the Bowle 2 standing tall in the market, whether you’re looking for a talking piece, a double consumption device or just an exciting vaporizer that performs reliably and has a massive amount of power to boot. The Bowle 2 is a multi-use device, combining a tech heavy vaporizer with a modular drinkware attachment for your drinking convenience. Tafee is truly trying to blur the lines between the physical act of vaping vs drinking, and as Canada has had legal cannabis since 2018, it’s about time we start seeing more mingling between our beer bros and our vaping victors and the entire ethos behind this device shows a dedication to bringing those spheres closer together. Is that a Drinking Glass on a Vaporizer? So, let’s talk about cup shaped elephant in the room; the clear piece you’ll see sitting on top of the “puck” of the Bowle 2 can help with personal hydration or even vapour cooling, it’s there primarily as an optional addition so that your beverage of choice will always be at hand. You don’t have to use the cup, it comes off easily, but it is definitely something we’ve never seen before. Too many times we misplace our cocktails while vaping, and this is an intriguing solution for that. The versatility you’ll find in the Bowle 2 is pleasantly surprising. The Bowle 2 couldn’t be easier to use; just place your flower in the included ceramic pot, insert said pot into the stem slot, start the device and inhale once it’s reached temperature. The LED will turn a steady green colour when it's ready, then go ahead and test your lungs. The Bowle 2 uses a pure convection heating system that ensures the material is evenly heated, and you’ll find it offers a consistent experience from bowl to bowl and that is essential for a fulfilling vaping experience. The Bowle 2 outperforms devices of similar size in regards to vapour output, and how that is actualized shows the amount of attention that was paid to the little things during the design and production phase. How impressive is it? The Bowle 2 reaches its top temperature of 482°F in one second. No, that’s not a typo. The device has a temperature range, so if you’re aiming for larger bowls, you’re welcome to use the higher temperatures. This device is recognized for its battery life as well, proudly boasting upwards of 20+ sessions on a single charge. Designed for Aesthetic, Portability and Power, Nailing all Three The creators at Tafee are truly proud of the design of this device, and they should be, it is a multiple time award winner. These accolades attest to the painstaking attention to detail that the team put in. While the mildly controversial cup is not for everyone, you’re not forced to use it, and you’re still presented with an absolutely top-notch vaporizer that outperforms many at its price point while delivering top tier flavour. Add to that how easy the device is to use and customize to your preferred temperature and the possibilities of additional, modular glass pieces in the future and you end up with a device that performs better than you expect while being a fantastic talking piece simultaneously. A high-quality vaporizer with a distinctive twist, the Bowle 2 from Tafee is truly a dream device for so many of us. The device’s powerful engine, fast heat up times and long-lasting battery is exactly what you’re asking for from a portable. The cup is cool, we love the cup, but even if we lost it, we’d still turn to this device again and again. Peak performance and a sexy aesthetic make the Bowle 2 one of our favourite vaporizers. Bowle™ Series II Complete Set includes: Puck Base Unit and Small Stem Drinkware (300 ml / 10 oz) Potter+ Herb Shredder  Oven Pots (4)  Mouthpieces (2) USB-C Charging Cable  Maintenance Kit Quick Start Manual Read our full in-depth review of 5 Reasons the Tafee Bowle 2 is My Go-To: Instant Heat, Pure Flavour, and More! here.

Read more less

DynaVap HyperDyn: The Ultimate "Big Bowl" Vaporizer A New Experience with State-of-the-Art Design The HyperDyn is DynaVap’s first “Big Bowl” vaporizer, offering a completely new experience with its state-of-the-art tip and cap combination. Featuring a larger chamber volume (average of 0.25g), the HyperDyn is constructed with medical-grade titanium, colored and protected by DynaVap’s advanced DuraDyn coating technology. This innovative device boasts a 10mm and 14mm taper, accommodating water piece use, and remains modular with previous DynaVap midsections, tips, and mouthpieces. Who is the HyperDyn For? Connoisseurs looking for a larger “session style” DynaVap vaping experience, and those yearning for a DynaVap with a bigger bowl. Benefits Massive Rips & Heavy Hits Push thermal extractions to the limit with the HyperDyn's larger chamber. Durability Crafted from high-quality, medical-grade titanium and built to last a lifetime. Fully machined and crafted in Wisconsin, USA. Everything is titanium except for the o-rings and thermostat. Flavour Explosion Experience terpenes like never before with enhanced flavour from your dry herb and/or concentrate. Prolong Your Session Enjoy longer sessions with the larger capacity chamber, reducing the frequency of reloads. Eliminate Combustion Enter a smoke-free world of enjoyment with the HyperDyn, leaving combustion behind for good. Discreet, Portable, & Modular Designed to fit in your pocket and be enjoyed during any activity. Modular with previous DynaVap components. Battery-Free No need for batteries. Just use a torch lighter or induction heater, and you’re ready to go. HyperDyn Features - Massive Rips: Enjoy bigger hits with the larger tip chamber/bowl volume, approximately 2.5x the original chamber size. - Extended Sessions: Prolong your vaping session with a larger capacity bowl that extends time between reloads. - Scratch Resistant: Clean, scratch-resistant look from DynaVap’s DuraDyn coating technology. - Durable Build: Hardened titanium guarantees a long-lasting device. - Optimal Bong Fitment: Built-in 10mm and 14mm tapers for use with water pieces. - Modular Compatibility: Compatible with all previous DynaVap midsections, tips, and mouthpieces. (Note: The Hyper Cap only fits the Hyper Tip.) - Ergonomic Design: Ergonomically designed stem enables easy Airport usage. - Precision Machined Cap: Titanium Cap that connects to the Hyper Tip without threads, consistent look and function with DynaVap’s Captive Cap technology. - Adjustable Airflow: Airflow is adjustable via the connection between the Hyper Tip and Hyper Cap. Tailor your draw to your preference. - Seven Unique Airflow Settings: Adjustable Airflow Control from seven settings controlled by the condenser depth within the mouthpiece. - Optimal Temperature Control: Hyper Cap engineered to “click” when heated to the optimal vaporization temperature, ensuring an exceptional session. How to Use 1. Remove the Cap 2. Load Your Dry Herb into the Tip chamber/bowl. 3. Place the Cap Back on the Tip 4. Heat the Cap with a Torch or Induction Heater until it Clicks. 5. Inhale from the mouthpiece end. 6. The Cap will click again when it has cooled down. HyperDyn Parts - DynaVap’s Hyper Cap - Titanium Tip: Hyper - Titanium CCD (Screen) - High Temp O-Rings (2) - Titanium Condenser Assembly with Mouthpiece: Hyper - High Temp O-Rings (2) - Titanium Stem: HyperDyn - Hyper Dosing Capsule Experience the new standard in vaporization with the DynaVap HyperDyn. Read our full in-depth review of What Is The DynaVap HyperDyn? (Top 5 Things To Know) here.

Read more less

Sleek and Minimalist Design The Convector comes in either stainless steel or titanium, and boasts a compact and minimalist design, offering a convection-focused heater that's user-friendly for novices and seasoned enthusiasts alike. Despite its size, this device packs a punch beyond its weight class, ensuring a satisfying vaping experience every time. Customizable Air Path Tailor your vaping experience with ease by choosing between the single-bore, high-flow ceramic air path tube or our quad-bore cooling tube. The single-bore tube provides lower draw resistance and exceptional flavour, while the quad-bore option increases cooling and slows draw speed. All of our Convector models are the quad-bore option, though a single-bore air path can be purchased separately. Ultra-Fast Heating and Cooling Equipped with a brand new, low thermal mass patent-pending heater design, the Convector delivers ultra-fast heat-up and cool-down times, allowing you to enjoy your vaping sessions where you want, when you want. You'll only heat the device for literally seconds, it heats up even faster than you expect it will. Advanced Features - Camo Cap: Featuring a precision heater plate assembly, the Camo Cap ensures optimal performance. Laser-welded heater plates with precise placement enhance heating consistency and prevent dislodging.   - Stem: Enjoy an 8mm precision bore throughout the stem, allowing for easy assembly with your preferred chamber or mouthpiece (DynaVap stems also use an 8mm connection). An improved taper ensures a better fit into 10mm glass joints, allowing you to use it with a 10mm female water piece without needing an adapter. - Chamber: The ceramic tube can be inserted into the chamber's back/male connection side, simplifying assembly with a single O-ring. An extended chamber connection ensures a secure fit to the stem. How to Use Using the Convector is straightforward and doesn't have a huge learning curve. Simply place your ground material into the chamber, ensuring not to overpack it for proper airflow. Attach the Camo Cap, heat the tip for your desired length of time with either a torch or an induction heater, and inhale from the stem opening. For even better performance, pair the Convector with the Inductor heat source. What's Included - 1x Titanium Convector Device - 1x Titanium Camo Cap - 1x Titanium Chamber with O-rings - 1x Stainless Steel Chamber Screen (Friction fit and replaceable) - 1x Titanium or Stainless Stem - 1x Bamboo Carrying Tube

Read more less

Bigger is Better with the DynaVap M7 XL The DynaVap M7 is the best version of the venerable device yet and leave it to George and co. to do something that they’ve never tried before and release the DynaVap M7 XL alongside it. The M7 XL is the first time ever that DynaVap has released an XL version of the M, and it provides a need for many who love DynaVap Ms in general but would prefer a version with a little extra…extra in every way. The DynaVap M7 XL is made with those who appreciate a longer stem, additional cooling, and a tapered mouthpiece, and DynaVap over delivers in each aspect, creating a device that looks and feels good. DynaVap has found a way to balance complexity with simplicity through years of experimentation and listening to their supporters, and the M7 XL is no exception. DynaVap's new device has a simpler, more understated look than its predecessor, the M Plus, but it still has the interesting visual vibe we expect.  A Fantastic Tip: Hit the XL Hard With the new XL, you can grind flower straight from the bud using the Septa Serrated Crown on the tip. In this completely redesigned tip, the half bowl adjuster functions infinitely better than in their previous models. The thermal mass has been moved under the oven leading to 20% less heat being transferred into the stem. The increase in mass translates into larger hits and though it’s hard to believe, DynaVap tips just keep getting better satisfying even the heaviest of hitters. The new mouthpiece on the M7 XL feels much more natural in your mouth, and it fits natively into a 10mm water piece. The new airport has a zigzag design that provides a more interesting air displacement while matching the overall aesthetic of the M7 XL’s design. A Condenser with Built-in Adjustable Airflow The precision of which the tip connects to the body on the M7 XL is just so clean, it’s nearly unbelievable. The M Condenser has built-in adjustable airflow that adjusts by simply clicking the condenser up and down in the mouthpiece and as it snaps into the slots, the vapour to air ratio will be locked in that position; just set it, and forget it, well, unless you want to adjust it. Everything From the M7 and More The XL maintains the features of its little brother, down to the native support for a 10mm water piece, and adds several of its own, including the all-new o-ring free condenser. The adjustable airflow built into the condenser is easy to activate and you’ll love the options it provides. Like the M7, the XL contains 4 o-rings, but they are situated differently, with two in the tip and two in the mouthpiece. Instead of going for an over the top, complicated design, the DynaVap M7 XL is a sleek, sophisticated device that won’t look out of place on your desk at work. This is a luxury product that both looks and feels like it and the performance is otherworldly. The M7 XL outperforms DynaVap’s previous M line iterations and actually comes in less expensive than their last one.

Read more less

It’s M7… DynaVap M7 For many, 7 is a lucky number. For DynaVap, the newest generation of their perennial portable is known as the M7, and they went back to the drawing board to bring new and old fans alike the most sophisticated, high-performance torch powered portable vaporizer on the market. The M7 is a battery free vaporizer that is incredibly efficient with the amount of flower needed to straight up blow your doors off; we were shocked at how little dry herb we needed to use to light us right up. Elegant in its Simplicity Through years of experimentation and listening to their supporters, DynaVap has found a way to balance complexity with simplicity and that’s never been truer than it is with the M7. The new device has a simpler, more understated look than the previous device, the M Plus, but it’s still got the interesting visual vibe that we expect from DynaVap. Though hard to describe and truly meant for the eyes, the pattern wrapped around the M7 is akin to an overlapping and interwoven metal design but will only be truly visible under a macro lens. If you take a look at the device from a wider view, the look is akin to carbon fibre, but the surface is actually rugged metal, a finishing process that was developed in-house by DynaVap. The Best DynaVap Tip Yet Another new development for this device is the innovative M7 tip that boasts the sharp Septa Serrated Crown that allows you to grind flower directly from a bud into the bowl. This completely redesigned tip has a completely functional half bowl adjustment that works infinitely better than in their previous models. The thermal mass has been moved under the oven leading to 20% less heat being transferred into the stem. The increase in mass translates into larger hits and though it’s hard to comprehend, DynaVap tips just keep getting better satisfying even the heaviest of hitters. You’ll Want to Put it in Your Mouth DynaVap didn’t leave the rest of the device out of the redesign process. The new mouthpiece feels natural in your mouth, and it fits natively into a 10mm water piece. The new airport has a zigzag design that provides a more interesting air displacement while matching the overall aesthetic of the M7’s design. The M7 fits together simply and snugly. The tip and condenser each only use two o-rings, meaning you need only four for the entire device, and with o-rings, less is always better. The precision of which the tip connects to the body is just so clean, you can barely believe it. Instead of going for an over the top, complicated design, the DynaVap M7 is a sleek, sophisticated device that won’t look out of place on your desk at work. This is a luxury product that both looks and feels like it and the performance is otherworldly. The M7 outperforms DynaVap’s previous M line iterations and actually comes in less expensive than their last one. It is unreal to see a price drop on a design this much better than the last, but we're into it.

Read more less

The Ultimate DynaVap Wood Experience: The WoodWynd We really appreciate the amount of sheer skill it takes to work with wood at a cursory level, and growing up with a woodworking artisan, we saw some pretty fancy wooden creations in our life. Needless to say, we were blown away by the engineering, sophistication, and gorgeous aesthetic in the amazingingly functional new WoodWynd from DynaVap, their first new wooden vape since the VonG. Looking good is great but is definitely secondary to performance and the WoodWynd impresses there as well, with improvements and upgrades across the board. DynaVap spent years developing this magnificent product so let’s see what the hullaballoo is all about.  Sexy Shape Like a Cola Bottle from Tip to Helix Tip This sexy vape has a longer, sleeker profile than the VonG with an hourglass shape that sits naturally and comfortably in your hand or between your fingers. The wooden stem has a stainless-steel crown on either end and is finished with a matching titanium triple helix mouthpiece, condenser and Helix Titanium Tip. The entire device now only requires one size of o-ring for secure assembly. The wood and metal are married together in sections in a fashion that you’ll have to see to believe. Shockingly, the WoodWynd is half the weight of the M+ at only 10g. The WoodWynd Vaunts Improvements at Every Stage Looking at the engineering of the device, with the stainless crowns and titanium parts, you have a precise connection on both ends, a very high-end feel. DynaVap shows some innovation here as well, directly interfacing the condenser with the mouthpiece to create a modular system without any o-rings that we’re excited to start experimenting with. The WoodWynd features the aforementioned Helix Tip with its built-in airports, that will provide optimum air flow, as well as delivering an incredible Adjust-a-Bowl system that’s easier to use than ever. Big news: for the first time since 2017, DynaVap is introducing a new CCD! This new titanium CCD has more perforations than before, providing as much air flow as possible. Use With Water, No Adapter Needed Like its predecessor, the WoodWynd fits natively in a 10mm female joint with no adapter necessary. You can truly grip it and rip it, take advantage of that open air flow, and pump some thick clouds through water. The design is so intentional, that even the mouthpiece serves additional functions like CCD insertion to ensure you won’t need any additional tools to use or maintain this device. How often can you say that? The one size of o-rings continues this devotion to incredible design that even boasts mirrored triple helix designs on the tip and mouthpiece. What can we say, we really appreciate a good product. If you’re a cloud chaser or just a discerning vaper, you’ll appreciate all of what the WoodWynd brings to the table. We honestly can’t think of a use case this won’t satisfy and we are getting a tonne of use out of ours.

Read more less

Introducing the Incredible VENTY from Storz & Bickel It’s been a hot minute since we saw a brand-new product from Storz & Bickel and this special offering is worth the wait. As the company in the industry with the longest and most impressive track record when it comes to vaporizers, and with the biggest R&D budget to match, we expect significance from the masters, and we got it with the VENTY. Let’s talk about it! Super-Powered with Free Airflow Meet the VENTY, the most powerful portable that Storz & Bickel has ever produced. The VENTY heats up from cold to vaporizing temp in only 20 seconds, the fastest we’ve seen from a S&B device. For reference, the Mighty+ takes 3x as long to heat up, at 60 seconds. While many vaporizers suffer from the “milkshake effect”, where the airflow can’t cut through the material cleanly and you struggle to pull a hit, Storz & Bickel are renown for the free airflow on their devices, allowing you to breathe in easily and be satisfied. The VENTY has the best airflow that they’ve ever offered, achieving up to 20L per minute, and is adjustable through a dial on the device. The ability to adjust airflow to your liking is a feature that goes way past “oh that’s neat” to “how have I been living my life without this?” and to show their dedication to the aspect, S&B included a flowmeter in the device that senses how emphatically you’re drawing on it and dynamically adjusts the heater in real time to compensate. Essentially, you’re getting the same draw at the desired temperature regardless of how you have your airflow set. Game Changing New Heater Design The VENTY has a newly designed heater to produce bigger clouds than ever and as far as we can tell, it’s among or maybe even the most powerful portable on the market with a maximum power usage of 130W @ 16 Amps, a substantial difference compared to 40W on the Mighty+. More power = bigger clouds, the math checks out and due to the design changes, they’re cooler and tastier than ever. The VENTY provides single degree temperature control directly on the device with a large, multi-coloured screen that’s easy to read and a vibration motor that will let you know when the device is ready to go. Chase Cool Clouds with Two-Stage Cooling When you’re hitting those big clouds, you’ll want them to be cool and of course Storz & Bickel accommodated for this with the new two-stage cooling unit on the VENTY. The innovative cooling system has two levels to elongate the vapour path and it is double walled so that the exterior remains cool to the touch. The VENTY utilizes an additional screen in the path itself to provide the most pristine vapour available on a portable. A Power Supply as Impressive as its Engine With an engine like this, you need to bring the power supply to match, and of course, the VENTY does not disappoint here. Equipped with USB-C charging that features the “supercharger” function that will provide an 80% charge in only 40 minutes if you’re using an appropriate charger. This SOB is packing two 18650 li-ion batteries that both power the beast and will last for many sessions between charges. Optional Bluetooth For More Customization The VENTY also has the capability for Bluetooth connections, but they are completely optional. If you do enjoy extra levels of customization, connect to their free web app and control things like vibration, pre-set Booster temperatures, Eco-Charge mode and more, including over the air software updates. It’s always nice when a device with great analogue parts has software that lets you make them even better, and we all know Storz & Bickel only releases the best. Along those lines, the VENTY is made to the same rigorous standards as their medically certified devices and uses only the highest quality materials that are known for their safety and purity. In fact, the VENTY is approved using UL (8139) and IEC 60335-1 certification, which is welcome to see and provides confidence in the device. The VENTY is Worth the Wait We had to wait a few years since there’s been a brand-new offering from Storz & Bickel, and the VENTY is well worth the wait. This extraordinarily impressive handheld vaporizer is exceptional in every way, from airflow to power to cooling to battery, and that’s really not something we can say very often.

Read more less

The Lotus is a Breath of Fresh Air Film goers are currently suffering through the worst case of franchise sequel fatigue ever. Just the same concepts redrawn again and again. Now produced by the respected creators of the Vapman, the second coming of The Lotus is as exciting as the first crane kick of The Karate Kid. Handmade by a small team of artisans in the rolling hills of Italy, the tender care put into this device is evident from the word go. The Lotus is a butane vaporizer, but it works in an unexpected and unique fashion. The Lotus has been designed so that it’s heated while inhaling, but the airpath is completely isolated from the butane flame. How? To enjoy the device, simply aim your torch at the centre point of the lotus flower on the Vapour Cap then start inhaling. You can exhibit incredible control over the temperature and speed of the vaporization with your own breath and the native heating technique. A Butane Vaporizer with an Isolated Airpath Ok, so why is this a big deal? When in use, the airflow comes from underneath the Vapour Cap, which is where the flame is aimed. So, you’re heating up the top, and your airflow comes from the bottom, giving true separation of church and state.  This results in pure convection vaporization and that is uncommon not only in butane powered vapes but especially ones with isolated airpaths. Simple to Use, Simple to Upkeep We love the usability of The Lotus; it’s just so easy to pick up and learn compared to a lot of butane vapes that require fine tuning and trial and error. The separation of the heat and airpath also makes it incredibly difficult to scorch your flower. The Lotus is made of two main parts, the aforementioned Vapour Cap, where the magic happens, and the Water Pipe Adapter (WPA) that will act as your bowl. The Vapour Cap has a built-in arm that easily stirs your bowl and connects securely with a magnet. The WPA works natively with a 14mm joint, so you could use something like the included J-Hook to use The Lotus dry or connect to any 14mm water piece if you like to get wet. The Lotus Bloomed its Way Into Our Hearts Not only is The Lotus known for flavourful, powerful hits, it’s also one of the most enjoyable vapes to use that we’ve tried in years. Let yourself fall under the spell of The Lotus; you won’t regret it when its magical capabilities turn it into your daily driver.

Read more less

Arizer Air SE Review – Affordable Dry Herb Vaporizer With Serious Performance Arizer has been a trusted name in the dry herb vaporizer space since the mid-2000s, known for simple, effective designs that stand the test of time. With the launch of the Arizer Air SE, the Canadian brand delivers their most accessible and budget-friendly vape yet—without cutting corners where it counts. And now, it’s available in the brand-new Sea of Green colour, giving the unit a fresh, bold look that stands out in the lineup. Simple Operation With Powerful Results The Air SE keeps things beautifully simple. It’s operated with a single button that controls everything, including five pre-set temperature settings. You’ll also find a built-in auto shut-off timer that not only helps preserve your herb, but also saves battery when you forget to power down. The battery life itself is impressive—delivering up to 80 minutes of use per charge. You can vape while charging thanks to Micro-USB pass-through support, and the battery is even user-replaceable. That makes the Air SE one of the easiest devices to maintain and keep running long-term, even with heavy use. Clean Vapour With Arizer’s Trusted GlassPod System Arizer continues to use their signature all-glass vapour path in the Air SE. That means your herb is only in contact with high-quality materials that preserve flavour and purity. The convection-style heat kicks in when you inhale, so your flower only heats when you need it to—minimizing waste while maximizing taste and effect. The removable glass stems are easy to clean, naturally cool your vapour, and make swapping out for a fresh session quick and painless. It’s everything you love about higher-end Arizer devices, packed into a more compact, accessible format. The Most Affordable Arizer Vaporizer Yet Despite its premium features, the Air SE is the most affordable vaporizer Arizer has ever released. It delivers surprising performance for its price point, and the features you'd expect in a vape twice its cost. This isn’t a stripped-down version—it’s a fully featured, stealth-sized powerhouse designed to bring high-quality vaporizing to more people than ever. Is The Arizer Air SE Worth It? If you’re new to vaporizing or just want a reliable portable that doesn’t break the bank, the Arizer Air SE hits the sweet spot. It delivers real performance, fantastic vapour quality, and enough battery life for multiple sessions on the go. With the addition of the new Sea of Green colour, it’s not just functional—it looks sharp too. Arizer proves once again that you don’t have to spend a fortune to get a great dry herb vaping experience. The Air SE is the perfect entry point into the world of Arizer, and a no-brainer choice for anyone looking to vape smarter in 2025. Read our full in-depth review of the Arizer Air SE here.

Read more less

We’ve been waiting for this one for a couple of years and we couldn’t be more excited that it’s finally here. A substantial upgrade from the Air 2, meet the Arizer Air MAX! As Drake says, “checks over stripes” and this bad boy checks every box, including some we didn’t expect. The Air MAX has evolved from the 90-minute 18650 battery in the Air 2 to an absolutely massive 26650 battery that will last for a staggering 135 minutes. That’s enough time to watch Return of the Jedi! Factor in the new ultra-fast USB-C charging and any battery woes you may have experienced with older vapes will float away into the vapours. The mad Canadians at Arizer have even included a glass-on-glass 14mm male water pipe adapter in the kit. You won't need to make an additional purchase just to use your new Air MAX with a water pipe, Arizer has you covered. The Air MAX takes the sneaky elements to the max. The glass stems can be pre-packed and stored inside the travel tubes, keeping them safe from damage while traveling, and saving you the risk and hassle of packing your device in the wild. The screen now features a stealthy dark mode, and you can even have a different temperature set for dark mode if you want to avoid any stealth-breaking cough-worthy clouds. While we’re talking about vaping temperatures, you’ve got to love the single degree alterations you can make to the fast-heating ceramic oven. One of our favorite new features, and one we expect to see on a bunch of devices from this point onward, is the auto-inverting LED screen. If you like vaping through a water pipe you'll know that looking at an upside screen while the vape is sitting in a water pipe isn't ideal. The screen auto-inversion completely solves this issue, I can't believe nobody thought about implementing this feature sooner! The Air MAX takes full advantage of the sixteen years of innovation that Arizer has poured into their products, and as a result we’re presented with an amazing device which will fulfill the needs of almost any user, including those who prefer botanicals over flower. The Arizer Air MAX is already one of our favorite portable vaporizers of all time.

Read more less

The Mighty+ is One of the Best Meet the Mighty+ vaporizer, your new favorite device. It's always a treat when Storz & Bickel refresh the product line, and this time it's the legendary Mighty's turn. This battery-powered device is hands down one of the best portable vaporizers money can buy. Incredibly Easy to Use The Mighty+ is incredibly well designed and easy to use with intuitive controls. Set your desired temperature, wait for the double vibration, and it pumps out vapour like a smoke machine at a Motley Crue concert. The 2021 Mighty+ vaporizer features a Superbooster mode, activated with three clicks to maximize efficiency and vapour output. Superboost & USB-C Charging Measuring in at 5.5” x 1.5” x 3” and weighing 243g, the Mighty+ vaporizer now has USB-C charging, allowing for fast charging at 45W. With that kind of juice, you can charge the vaporizer from 0 to 80% in 45 minutes. You can also charge the device from a power bank! As a large portable vaporizer it has a whopping battery life and the capacity to put out desktop-caliber vapour. Heats Up in 60 Seconds The Mighty+ vaporizer also has an improved ceramic coated chamber for even better flavor, and won’t scratch like a stainless-steel bowl. It heats up fast in around 60 seconds, and the fins on the Mighty+ have been upgraded to help it stand secure on any flat surface. Consistent, Reliable, Effective Let’s make this easy for you. If you’re even thinking about a Mighty+, just get it. With improvements across the board and fantastic flavorful vapour, the Mighty+ will provide you with years of German-engineered peak performance.

Read more less