Sneaky Pete Vaporizer Accessories

The Crafty+/Mighty+ Mini Bubbler fits snugly on either device and comes with a soft silicone base. The bubbler delivers cooling hydration to your vape hits, while being small and discrete enough to take with you on-the-go, or keep out of sight at home. A screen on the bottom of the Mini Bubbler is designed to prevent flower from getting into the water piece, keeping the experience clean and pleasant. The Crafty+/Mighty+ Mini Bubbler is well built, and will elevate your vaping experience with cool, water-conditioned vapour. Works with the Crafty, Crafty+, Mighty, or Mighty+ by Storz & Bickel.

Read more less

Use 10mm Vapes with 14mm Glass Simply Bring harmony to your vape setup with this versatile adapter. This low profile adapter is the super easy way to turn your 14mm female joint into a 10mm female. It allows you to hook up your favorite 14mm female water piece to a 2020 DynaVap M, or any other 10mm male vaporizer or accessory, and you're all set. This low profile adapter will not add any height, is barely noticeable, and fits snugly. Bring flexibility to your vaping rig: Adapt! If low profile isn't your thing, we offer a traditional version as well. Same quality, same functionality, different height.

Read more less

Complete your V.A.S. (Vaporizer Accessory Stand) with a Round Top or Flat Top Glass Stopper. Made from borosilicate glass, the Glass Stopper allows you to fill the reservoir arm with isopropyl alcohol and will prevent the alcohol from evaporating. Isopropyl alcohol is the ultimate cleaning solution for all of your vapes and accessories, so keep it close at hand at all times. Vape enthusiasts know the V.A.S. is the perfect accessory for all of your desktop organizational needs, and the Glass Stopper will give even more utility to your setup.

Read more less

The Maraca Glass Stem combines many different cooling elements in one piece that’s convenient and comfortable to hold and use. The tip end is sized to fit any stainless steel or titanium DynaVap tip, and The Maraca Stem’s glass it thick and durable. Behind the tip is a shotgun carb to clear the entire stem with a massive rush to the head. After the carb is a restriction point followed by an expansion chamber, causing even more cooling. The chamber contains three glass beads to further condition and cool the vapor, and it's enclosed at the back end by a pinch point with three pokes. Finally, three glass nipples agitate the vapor completely before ending at the mouthpiece, much cooler and cleaner than when it left the tip. On top of everything else, it can double as a musical instrument. Name another DynaVap stem that can do that 😉 Key Features: - Clear glass w/red glass beads- 85mm length- Fits any DynaVap tip- Shotgun carb at tip end- Glass beads agitate and filter vapor- Restriction point/expansion chamber adds cooling- Glass nipples finalize conditioning and complete cooling

Read more less

The Bent-Neck Carta Top is the perfect replacement and upgrade for its factory water attachment. It’s sized to fit directly onto your Carta base and has the same percolator and water volume to cool those monster rips the Carta is known for. This piece’s advantage is having the neck stretched and bent at an angle, so it’s not just a straight opening in the top like the original model. The bent neck design more naturally matches the angle you use when dabbing with the Carta, so it's much more comfortable, plus the bend helps eliminate any splashing. The mouthpiece is flared and worked for a better feel and the borosilicate glass is thick and durable, complementing the Carta's rugged design.

Read more less

This Sidestep Adapter is sized 14mm with a male joint at one end and a female joint at the other. There isn’t much vertical difference between the joints, but it moves the connection about 3.5” off to the side of the Mega Globe, so now your vapes and bangers won’t sit directly on your rig itself. Sidesteps are handy to catch debris and reclaim, keeping your water piece cleaner. You’ll also protect your Mega Globe (or another piece, it fits any 14mm rig) from being in direct contact with vapes or hot bangers. Keep your investment safe and save time on maintenance with our Sidestep Adapter for the Mega Globe.

Read more less

The Sneaky Pete Master Adapter™ fits almost all vaporizers to any water tool with a female joint. The adapter itself is two separate individual accessories that perfectly fit together. The smaller piece goes neatly within the larger piece so it's all one very convenient package less than 1.5" tall. The smaller adapter has a gradual inner taper for more narrow round tips, while the larger adapter has distinct cutouts for specific vapes. Together, they fit your bong to any cartridge and all DynaVap stems and bodies. They also adapt for the Arizer Solo 2, Air 2 and ArGo, the Flowermate V-5 Nano, the DaVinci IQ, the RBT Splinters, the E-Nano… Pretty much any vape with a round mouthpiece works with this accessory thanks to its innovative design and silicone flexibility. The Master Adapter covers more vapes than any other adapter on the market. Key Features: - 100% silicone, durable and shape-able- For 10mm, 14mm and 18mm female joints- Works with more vapes than any other adapter- Most affordable way to adapt the most vapes for water use

Read more less

The Aristocrat Stem introduces extra length and sophistication to your DynaVap set-up. Measuring in at an extended 90mm length, the Aristocrat Stem is easier to handle for large hands and also offers some additional cooling. Available in seven striking colors, add the purity of glass and a fancy look to your DynaVap. * DynaVap Tip NOT included. Key Features: - Extended 90mm length- Works with any DynaVap tip- Add the purity of glass to the DynaVap- Does not have a carb hole- Available in seven different color options *Also works perfectly with the Healthy Rips Fury Edge

Read more less

The Strong-Arm DynaVap Adapter V2 will allow you to use your DynaVap Tip directly with a water pipe! Simply place a DynaVap Tip into the Strong-Arm and you're ready to hit your DynaVap through a 10mm, 14mm, or 18mm female water pipe. This is the easiest and most convenient way to use your DynaVap through a water pipe, and your vapour will touch nothing but the purity of glass. Please be gentle and twist the tip into the adapter when inserting, glass stems need a higher degree of care than metal stems. Key Features: - Works with 10mm, 14mm, or 18mm female water pieces- Enhanced tighter fit- Approximately 3" in length

Read more less

This is a replacement whip for the Mega Globe, or any water piece with a 14mm female fitting. This is a full replacement whip including the glass mouthpiece, 1 foot tubing, and either a 14mm 90 degree male adapter, or a 3-in-1 universal adapter. If you break a component of your whip, or if the silicone is getting a little funky, a replacement whip is an inexpensive way to get that brand new feeling back.

Read more less

These Glass Syringes are the perfect way to fill a TH2 Cartridge or to dispense your concentrate! The Syringe is made from glass and features a Luer Lock to keep the syringe contents fresh. The Short Blunt Tip Needle attaches to the Syringe for easy and mess-free filling or dispensing of your favorite concentrate. The Syringe includes graduated markings so you can carefully control how much you fill, and comes in a convenient plastic case with a magnetic clasp.

Read more less

The Honest Butane Torch Lighter is great all Sticky Bricks, DynaVaps, and more. The torch features a dust cover connected with a chain, and is ignited by simply pressing down the button on top. Be sure to use at least triple-refined butane for best results and lighter longevity. Due to postal laws we are unable to ship torches prefilled.

Read more less

Do not over-tighten the adapter onto your vaporizer! It only needs a slight/eighth turn, over-tightening will damage your vaporizer. This water pipe adapter is designed to fit Crafty and Mighty vaporizers to take your vaping to the next level. Plumb in a water pipe to your vape set-up for cooler vapour, concentrating it through percolation for larger and cloudier hits. The adapter comes in 14mm and 18mm male vaporizer joint variations, and connects universally to 10mm, 14mm, and 18mm female water pieces. Easy to install, simply remove the cooling unit on your vaporizer, then line up the slots on the adapter with the holes on your device. Very slightly twist the adapter to secure it; an eighth turn will make it completely secure. Be sure not to twist the adapter too much! Over-tightening will damage your vaporizer. Once the adapter is secured, attach your modified vaporizer to your water pipe of choice and enjoy fresh water hits. Highly recommended for Crafty and Mighty users for a superior vape experience.   Key Features: - Compatible with Crafty, Crafty+, Mighty, or Mighty+ vaporizers- Durable plastic housing contains borosilicate glass for a pure vapor path- Replaceable screen included- Easy to assemble - Available with a 14mm or 18mm male vaporizer joint- Universally adapts to 10mm, 14mm, and 18mm female water pieces

Read more less

The 3D Flow Stem features striking and functional divots throughout the length of the stem to increase the surface area your vapor passes over. The increased surface area allows for more cooling of the vapor, resulting in a smoother draw. The divots do not affect the airflow in any way, and the stems provide a clear draw for large and cool hits.  Key Features: - Compatible with the Arizer Solo 2/Air 2- Divots are visually striking and functional- The increased surface area provided by the 3D divot design allows for cooler vapor and better draws than a traditional stem- Great airflow, easy to clean- Durable glass construction 

Read more less

The Mighty Vaporizer Stand is a perfect way to enhance your Mighty experience! It allows full access to all functions and buttons on the Mighty while it's in the stand, meaning you can charge and change temperatures while your Mighty sits happily upright on your desk. The stand is made from a hard and durable polycarbonate that will last for years while not scratching your Mighty. With the Mighty in a vertical position, viewing the screen and changing temperatures is much easier, it's the stand that the Mighty should have included! Once you put it onto your device you will leave it on! Key Features: - Designed specifically for the Mighty by Storz & Bickel- Charge & change temperatures while in the stand- Your Mighty will stand securely in place on a desk or table- A must-have accessory for any Mighty owner!- Secure fit

Read more less

This stainless steel herb funnel makes filling your favorite vaporizer simple and tidy. Place the funnel into the top of the chamber and gently pour your herb in. It helps to eliminate the mess and inconvenience that can take place when pouring directly from the grinder into a vaporizer. Works best with finely ground materials, but will also work with a more coarse blend.

Read more less

Glass it up! Add this optional glass mouthpiece to your Sneaky Pete Globe (or replace the one that comes with the Mega Globe) for a next level experience. The mouthpiece is small and lightweight, with great lip-feel and reduced draw resistance compared a whip. Key Features: - 4.25" length- Ends in a 14mm male joint- This mouthpiece can also be used with the Magic Flight Orbiter

Read more less

The Buzz features a honeycomb percolator for maximum bubble production. The filtration that takes place on this device is massive, don't let its sleek size fool you. This unit also features glass bolsters on all joints for maximum strength. The versatile 14mm female joint will work with a variety of adapters, nails, and vape pens. Key Features: - The Buzz stands approximately 9" tall- Features the ever popular 14mm female joint- Wide and stable base, will hold even large vaporizers- Glass bolsters provide stability and durability- Honeycomb percolator provides massive bubbling and water conditioning- Great lip feel on the mouthpiece, a pleasure to use

Read more less