Sneaky Pete Vaporizer Accessories

Sometimes your tools need tools, the Scrape & Stir Tool is made for that situation. Coming in at 4” in total length and made from stainless steel, its comfortable feel and dimensions mean it will fit snugly in your hand, if you’ve found other vape tools too small, that won’t be a problem here. The Tool is composed of two sections: a 2.5” reinforced stirring/poking end and a 1.5” grip section. The stirring section is nice and long to get into deep bowls with ease, for general vape work and maintenance, or even to scrape off that stubborn detritus! The grip section is super useful for tamping down your bowl or to help place a DynaVap CCD in position. Finally, a stable, lengthy, and comfortable Scrape & Stir Tool that isn’t made for ants!

Read more less

If you’re looking for a way to bring the effectiveness of water cooling to your Arizer vape without the water, look no further than the Arizer Coil Stem. Vapour will travel through over 12” of coiled cooling glass before it reaches your appreciative respiratory system, this is more than twice as long as the standard Arizer stem so it provides a lot of extra cooling. The Coil Stem also includes a carb hole, placed far away from the mouthpiece to keep your finger cool. By covering the carb, you can increase the draw resistance and the extraction speed, and once you've finished your draw you can use the carb to clear the stem. You can also leave it open to allow more airflow for a freer draw and cooler vapour. Featuring a permanent glass screen for easy maintenance, the Coil Stem also has legs so it can sit on a table without rolling away. Add the Arizer Coil Stem to your Air 2 or Solo 2 for pristinely cooled vapour today!

Read more less

Size matters! The Lubinski SK-79 is large enough to fit comfortably in your hand, while also housing a massive fuel reservoir. Perfect for taking on the road without the worry of needing to refuel, it also stands upright on its own, allowing for hands free usage when the need arises. The SK-79 comes with a dual-function flame lock, allowing you to both lock the torch to avoid accidentally igniting it, or lock the flame in the on position, eliminating the need to hold the trigger. To complete the user-friendly experience, there's also an analogue flame adjuster for temperature control.  Ideal for DynaVap or Sticky Brick users, the Lubinski SK-79 feels good in your hand, and with its enormous fuel reservoir, it will deliver the perfect flame for as long as your heart desires. Due to postal laws we are unable to ship lighters prefilled. All efforts are made to accommodate your colour choice but you may receive a different colour than what you selected.

Read more less

Everyone wants their glass, adapters and equipment looking brand new, all the time. We want to make sure that you can keep your tubing looking and operating at peak performance for a reasonable cost. The 36” Globe Whip Tubing is designed especially for our Globe and Mega Globe glass water pieces and is an exact replacement for the original tubing. Our tubing can replace your whip when it becomes too dirty, or can even be used to add length to your existing whip if you’d like a longer extension from your water piece. Look sharp, with the Globe Whip Tubing extension/replacement.

Read more less

When glass meets glass, ensure the connection stays secure with our plastic Keck Clips. Whether you're securing a freshly filled bowl of flower, or keeping your mouthpiece or Sidestep Adapter firmly in place, these clips ensure that your glass stays safe and attached, helping you avoid mishaps and breakages. Keck Clips are sturdy and stiff, but won't scratch your glass piece. For peace of mind, get clipped.

Read more less

If the Arizer Air 2 or Solo 2 are part of your vape game, well, here's a game changer! The BubbleMax gives you the cooling of a large water-piece in a compact package, delivering cool hits through your Arizer vape. The difference in performance after adding the BubbleMax is dramatic, while maintaining the discrete and portable attributes of Arizer vapes. Standing 6" tall with a tube percolator boasting 4 slits for additional bubbling, the BubbleMax gives you an easy draw from a mouthpiece canted to a comfortable position, all through pure glass, tip to tip. We designed and built both variants of the BubbleMax here at Sneaky Pete Vaporizers to fit perfectly with the Multi-Stand, and it's an addition we're thrilled to share with you. Get the cooling you'd expect from a stand-alone water-piece and change your game. Get the BubbleMax; it's cool. Key Features: - Compatible with the Arizer Air MAX, Air 2 and Solo 2- Numerous slits on percolator provide cooler temperature hits- Ultimate purity from all glass production with a permanent filter - Portable and discrete, but highly effective- Designed to be a significant improvement over the stock experience- We love this one!- Never leave a water piece unattended on your vape, remove the water piece between uses

Read more less

The LittleFinger Adapter is the easiest, cleanest, and most convenient way to use any DynaVap tip with a waterpiece. With its universal 10, 14, or 18mm male joint, the LittleFinger truly does adapt to whatever your needs are. Two wide glass bands provide extra durability while also allowing you to set the unit down when it's hot, as it holds the tip suspended in the air rather than laying it on the table. Plus, it's enjoyable to watch the vapor travel through the glass. Fun, versatile, and super convenient. Get cooling hydration combined with the purity of glass with the LittleFinger Adapter.

Read more less

Go to the whip with any 10, 14, or 18mm female water piece by using the Universal Whip Adapter. The multi-sized glass connector allows for more functionality than our standard whip adapter. And with its 8.1mm whip connector, it can be used with a Volcano Hybrid, Arizer Extreme Q, and many more setups. Ready to whip it good? Get the Universal Whip Adapter.

Read more less

The Crafty+/Mighty+ Mini Bubbler fits snugly on either device and comes with a soft silicone base. The bubbler delivers cooling hydration to your vape hits, while being small and discrete enough to take with you on-the-go, or keep out of sight at home. A screen on the bottom of the Mini Bubbler is designed to prevent flower from getting into the water piece, keeping the experience clean and pleasant. The Crafty+/Mighty+ Mini Bubbler is well built, and will elevate your vaping experience with cool, water-conditioned vapour. Works with the Crafty, Crafty+, Mighty, or Mighty+ by Storz & Bickel.

Read more less

Use 10mm Vapes with 14mm Glass Simply Bring harmony to your vape setup with this versatile adapter. This low profile adapter is the super easy way to turn your 14mm female joint into a 10mm female. It allows you to hook up your favorite 14mm female water piece to a 2020 DynaVap M, or any other 10mm male vaporizer or accessory, and you're all set. This low profile adapter will not add any height, is barely noticeable, and fits snugly. Bring flexibility to your vaping rig: Adapt! If low profile isn't your thing, we offer a traditional version as well. Same quality, same functionality, different height.

Read more less

Complete your V.A.S. (Vaporizer Accessory Stand) with a Round Top or Flat Top Glass Stopper. Made from borosilicate glass, the Glass Stopper allows you to fill the reservoir arm with isopropyl alcohol and will prevent the alcohol from evaporating. Isopropyl alcohol is the ultimate cleaning solution for all of your vapes and accessories, so keep it close at hand at all times. Vape enthusiasts know the V.A.S. is the perfect accessory for all of your desktop organizational needs, and the Glass Stopper will give even more utility to your setup.

Read more less

The Maraca Glass Stem combines many different cooling elements in one piece that’s convenient and comfortable to hold and use. The tip end is sized to fit any stainless steel or titanium DynaVap tip, and The Maraca Stem’s glass it thick and durable. Behind the tip is a shotgun carb to clear the entire stem with a massive rush to the head. After the carb is a restriction point followed by an expansion chamber, causing even more cooling. The chamber contains three glass beads to further condition and cool the vapor, and it's enclosed at the back end by a pinch point with three pokes. Finally, three glass nipples agitate the vapor completely before ending at the mouthpiece, much cooler and cleaner than when it left the tip. On top of everything else, it can double as a musical instrument. Name another DynaVap stem that can do that 😉 Key Features: - Clear glass w/red glass beads- 85mm length- Fits any DynaVap tip- Shotgun carb at tip end- Glass beads agitate and filter vapor- Restriction point/expansion chamber adds cooling- Glass nipples finalize conditioning and complete cooling

Read more less

The Bent-Neck Carta Top is the perfect replacement and upgrade for its factory water attachment. It’s sized to fit directly onto your Carta base and has the same percolator and water volume to cool those monster rips the Carta is known for. This piece’s advantage is having the neck stretched and bent at an angle, so it’s not just a straight opening in the top like the original model. The bent neck design more naturally matches the angle you use when dabbing with the Carta, so it's much more comfortable, plus the bend helps eliminate any splashing. The mouthpiece is flared and worked for a better feel and the borosilicate glass is thick and durable, complementing the Carta's rugged design.

Read more less

This Sidestep Adapter is sized 14mm with a male joint at one end and a female joint at the other. There isn’t much vertical difference between the joints, but it moves the connection about 3.5” off to the side of the Mega Globe, so now your vapes and bangers won’t sit directly on your rig itself. Sidesteps are handy to catch debris and reclaim, keeping your water piece cleaner. You’ll also protect your Mega Globe (or another piece, it fits any 14mm rig) from being in direct contact with vapes or hot bangers. Keep your investment safe and save time on maintenance with our Sidestep Adapter for the Mega Globe.

Read more less

The Sneaky Pete Master Adapter™ fits almost all vaporizers to any water tool with a female joint. The adapter itself is two separate individual accessories that perfectly fit together. The smaller piece goes neatly within the larger piece so it's all one very convenient package less than 1.5" tall. The smaller adapter has a gradual inner taper for more narrow round tips, while the larger adapter has distinct cutouts for specific vapes. Together, they fit your bong to any cartridge and all DynaVap stems and bodies. They also adapt for the Arizer Solo 2, Air 2 and ArGo, the Flowermate V-5 Nano, the DaVinci IQ, the RBT Splinters, the E-Nano… Pretty much any vape with a round mouthpiece works with this accessory thanks to its innovative design and silicone flexibility. The Master Adapter covers more vapes than any other adapter on the market. Key Features: - 100% silicone, durable and shape-able- For 10mm, 14mm and 18mm female joints- Works with more vapes than any other adapter- Most affordable way to adapt the most vapes for water use

Read more less

The Aristocrat Stem introduces extra length and sophistication to your DynaVap set-up. Measuring in at an extended 90mm length, the Aristocrat Stem is easier to handle for large hands and also offers some additional cooling. Available in seven striking colors, add the purity of glass and a fancy look to your DynaVap. * DynaVap Tip NOT included. Key Features: - Extended 90mm length- Works with any DynaVap tip- Add the purity of glass to the DynaVap- Does not have a carb hole- Available in seven different color options *Also works perfectly with the Healthy Rips Fury Edge

Read more less

The Strong-Arm DynaVap Adapter V2 will allow you to use your DynaVap Tip directly with a water pipe! Simply place a DynaVap Tip into the Strong-Arm and you're ready to hit your DynaVap through a 10mm, 14mm, or 18mm female water pipe. This is the easiest and most convenient way to use your DynaVap through a water pipe, and your vapour will touch nothing but the purity of glass. Please be gentle and twist the tip into the adapter when inserting, glass stems need a higher degree of care than metal stems. Key Features: - Works with 10mm, 14mm, or 18mm female water pieces- Enhanced tighter fit- Approximately 3" in length

Read more less