Dr. Dabber Ghost² Replacement eChamber — Full Ceramic Atomizer
A genuine replacement eChamber for the Dr. Dabber Ghost², featuring a full ceramic dish, improved knurling grip, and clean, coil-free performance.
Watch the Ghost² in action – full ceramic bucket and advanced heating curves.
Overview
The Ghost² Replacement eChamber restores your vaporizer to peak performance with a full ceramic dish and a refined knurled finish for easier handling. Designed to match original factory specs, this chamber delivers the same clean flavor, fast heat distribution, and coil-free extraction the Ghost² is known for.
If your original atomizer is worn, stained, or producing off-flavors, replacing it with a fresh ceramic chamber is the fastest way to regain full performance.
Key Features
Official OEM Replacement — built by Dr. Dabber for perfect Ghost² compatibility.
Full Ceramic Dish — no coils or exposed metal; side-heated for clean terpene flavor.
Ceramic Vapor Path — preserves purity from chamber to mouthpiece.
Knurled Grip Design — easier to remove, clean, and reinstall.
Even Heat Transfer — consistent extraction across all Ghost² heat presets.
Durable Ceramic Build — resistant to staining, cracking, and heat fatigue.
Compatibility
This eChamber is compatible only with the Dr. Dabber Ghost² portable concentrate vaporizer.
It is not compatible with earlier Ghost models or other brands.
Fully supports all Ghost² temperature presets (420°F–540°F) and all Dynamic Heat Modes.
Why Replace Your Ghost² Chamber?
Heavy use can leave permanent residue and buildup inside the ceramic, which affects flavor and heat performance. A new chamber restores:
Cleaner flavor with a fresh ceramic surface
Smoother vapor and more consistent draws
Better heating efficiency at all temperature levels
More dependable performance during repeated sessions
Cleaning & Maintenance
To keep your new ceramic chamber performing like new:
Swab with a dry cotton swab between hits
Use isopropyl alcohol for deeper cleaning (only when cool)
Avoid metal tools that can scratch the ceramic
Ensure the chamber is fully dry before reheating
FAQ – Ghost² Replacement eChamber
Is this the official Ghost² chamber?
Yes. This is a genuine Dr. Dabber OEM replacement part.
Does it change the temperature performance?
No — it supports every Ghost² preset and every Dynamic Heat Mode.
Will a new chamber improve flavor?
Usually, yes. Old residue is the most common cause of flavor issues.
Can I soak it in alcohol?
Yes, but only when completely cool. Do not soak any electronic components.
Final Thoughts
If your Ghost² isn’t tasting as fresh as it used to or is heating unevenly, the Replacement eChamber is the simplest and most effective upgrade. With a ceramic dish, knurled grip, and clean coil-free heating, this OEM chamber instantly restores that smooth, flavorful Ghost² performance.
Sneaky Pete Vaporizers — your source for genuine Dr. Dabber Ghost² replacement parts.
Dr. Dabber Ghost² — Premium Portable Concentrate Vaporizer
The Dr. Dabber Ghost² delivers a clean, powerful on-the-go concentrate experience with a ceramic chamber, precise temperature control, and dynamic heat modes inside a compact, durable design.
See the Ghost² in action – ceramic bucket design and precision heat control.
Overview
The Ghost² performs at a level far beyond a standard concentrate pen. With a full ceramic bucket, ceramic vapor path, and three dynamic heat curves, it delivers cleaner flavor, smoother pulls, and more consistent extracts compared to most portable devices.
Key Features
Full Ceramic Bucket — side-heated, no coils or wires, pure terpene flavor.
Five Temperature Presets — 420°F–540°F for full control over vapor production.
Dynamic Heating Modes — Ascent, Steady, and Descent profiles.
Ceramic Vapor Path — no silicone or metal taste.
Pocket-Ready Size — approx. 3.5″ × 2″ × 1″; rugged and compact.
Flip-Top Lid — quick loading and spill-resistant design.
Full Disassembly — deep cleaning keeps performance consistent.
USB-C Fast Charging — about 1 hour to full; ~20 sessions per charge.
Temperature Presets (420°F–540°F)
The Ghost² includes five tuned presets:
420°F – maximum flavor
450°F – smooth and light
480°F – balanced and reliable
510°F – dense and strong
540°F – high-temp performance
Dynamic Heat Modes
Ascent Mode — temperature gradually rises during your draw.
Steady Mode — holds a perfectly flat curve.
Descent Mode — starts hot and cools like a quartz banger.
Switch modes with a quick triple-tap. The LED bar updates instantly.
Compact & Durable
At only 3.5″ tall, the Ghost² is extremely portable yet tough enough for everyday carry. The flip-top lid protects the chamber, prevents leaks, and makes loading fast.
Cleaning & Maintenance
A quick dry Q-tip between hits keeps flavor clean. For deeper maintenance, the Ghost² fully disassembles, giving access to the bucket, lid, and entire vapor path.
Battery Life & Charging
USB-C fast charging takes about one hour. A full charge provides roughly 20 complete sessions, and pass-through mode allows emergency use while plugged in.
FAQ – Dr. Dabber Ghost² Vaporizer
What temperatures does the Ghost² support?Five presets from 420°F to 540°F for flavor, balance, or high-temperature performance.
Is the chamber actually ceramic?Yes — the Ghost² features a full ceramic, side-heated bucket with a ceramic vapor path.
How long does the battery last?Around 20 sessions per charge depending on heat mode and temperature.
Can I use any type of concentrate?Yes — it works with all waxes, oils, and concentrates.
Is it easy to clean?Very — swab the bucket between hits and fully disassemble the top when needed.
Final Thoughts
The Dr. Dabber Ghost² is one of the cleanest-tasting and most refined portable concentrate vaporizers available. Its ceramic bucket, precise heat presets, and dynamic heating curves give it performance normally found in larger devices. If you want clean flavor, reliable output, and true pocket-friendly convenience, the Ghost² delivers exceptional value and consistency.
Sneaky Pete Store presents the Dr. Dabber Ghost² — built for clean flavor, precise control, and dependable performance anywhere.
Puffco Proxy J-Hook — Premium Dry-Cooling Glass Attachment
Enhance your Puffco Proxy with dramatically cooler, smoother, water-free hits using this long, bead-filled custom J-Hook.
Overview
The Puffco Proxy J-Hook is a purpose-built glass attachment that replaces the small stock Proxy glass with a longer, smoother, and more cooling vapor path. Designed specifically for the Proxy—no adapters or fit issues—the J-Hook delivers a major upgrade in comfort while preserving the Proxy’s clean flavor and easy portability.
Custom Fit for the Proxy
Instead of using a standard 14mm J-hook with an adapter, this glass piece is engineered exclusively for the Proxy. The fit is secure, airtight, and optimized for airflow. At a full 8 inches in length, the J-Hook provides significantly more cooling distance than the original glass while remaining lightweight and easy to carry.
Inside the J-Hook is a chamber packed with hundreds of tiny glass beads. These beads increase internal surface area, creating a dense cooling matrix that pulls heat out of the vapor before it reaches your mouth. The result: smoother, cooler, easier pulls without needing a water rig.
Key Features
Made for any Puffco Proxy — perfect fit with no adapters required.
8-Inch Vapor Path — long, elegant shape for excellent dry cooling.
Glass Bead Chamber — hundreds of beads absorb heat and smooth vapor.
Water-Free Smoothness — enjoy cooler hits without carrying a bubbler.
Pure Flavor — maintains the Proxy’s clean terp profile.
Portable & Lightweight — large performance, small footprint.
Easy Cleaning — drop into ISO alcohol, shake, rinse, and dry.
Borosilicate Glass — durable and built for daily use.
Performance Upgrade
Compared to the stock Proxy glass, the J-Hook offers a major jump in cooling and smoothness. The extended length, combined with the bead-filled chamber, greatly reduces harshness—especially at higher temperatures—while preserving the Proxy’s full flavor detail.
Cleaning & Maintenance
Cleaning is fast and effortless. Place the J-Hook in a sealable bag with isopropyl alcohol, shake for a few minutes, rinse with warm water, and allow it to air dry. The glass beads clean themselves inside the chamber, restoring the piece to a like-new shine.
Final Thoughts
For Proxy users who want cooler, smoother, water-free hits, the Puffco Proxy J-Hook is one of the best upgrades available. Its long 8-inch shape, bead-filled cooling system, and custom Proxy-specific fit deliver outstanding performance with no extra setup. It’s stylish, functional, and easy to maintain—an ideal accessory for elevating your dry-cooling experience.
Sneaky Pete Vaporizers — premium Puffco Proxy accessories, custom glass, and performance upgrades.
YLL IH 3.0 Induction Heater — 100W Adjustable Power & Precision 🔥
The next evolution of portable heating — the YLL IH 3.0 delivers unmatched power, precision, and consistency for advanced users and newcomers alike.
Sorry, your browser doesn’t support embedded videos.
Overview
The YLL IH 3.0 Induction Heater from YLLV Vape redefines what portable induction technology can do. With a massive 100W adjustable output, dual 21700 battery support, and fine-tuned controls, it delivers powerful performance and exceptional versatility.
Compatible with popular devices like the DynaVap, Tempest, Simrell, and Tornado, the IH 3.0 brings fast, precise heating wherever you go.
Main Features
Adjustable Power (30W–100W): Fine-tune the heat level for customized sessions and full extraction.
Dual 21700 Battery Compatibility: Delivers long life, stable output, and quick recovery between hits.
Depth-Adjustable Coil Chamber: Set the device distance for pinpoint heating control.
Replaceable Glass Tube Chamber: Designed for easy cleaning and pure, untainted flavor.
Auto-Start Detection: Automatically activates heating when your device is inserted.
180° Screen Rotation: Perfect for left- or right-hand operation.
Visible Coil Window: See your alignment clearly and heat with confidence.
Included in the Box
1 × YLL IH 3.0 Device
2 × Glass Tubes
2 × Ceramic Inserts
1 × USB-C Charging Cable
Batteries sold separately. Recommended: Molicel/NPE INR-21700-P42A 45A 4200mAh Flat Top 21700 Battery.
Design & Performance
Built to outperform, the YLL IH 3.0 features dual 21700 cells and a top-end 100W capacity. Its precise digital display lets you adjust power and heating duration down to the second — giving you total control over your experience.
The strong magnetic base, rubberized feet, and transparent coil window create a durable, stable platform that’s intuitive to use and easy to master.
Why Choose the YLL IH 3.0?
Most induction heaters provide speed. The YLL IH 3.0 delivers speed and precision. Its variable wattage and customizable timer let you replicate perfect heating profiles every time — no torch, no guesswork.
With smart auto-start detection, strong magnets, and a compact form factor, this heater delivers desktop-level control in a portable body — all at an incredible value.
Technical Specs
Power Output: 30W–100W Adjustable
Battery Type: Dual 21700 (not included)
Charging: USB-C Fast Charge
Display: OLED Screen, 180° Flip
Heating Type: Automatic Induction Coil
Final Thoughts
The YLL IH 3.0 stands at the top of the portable induction heater category — powerful, smart, and consistent. Whether you prefer gentle flavor draws or hard-hitting sessions, this device lets you define your own heat profile with precision and reliability.
Compact enough for travel, powerful enough for daily use — the IH 3.0 brings professional-grade heating straight to your hands.
Crossing Heated Dab Tool (Hot Knife)
Load clean. Drop clean. No mess.
The Crossing Heated Dab Tool is the easy way to load sticky concentrates into your wax pen or e-rig without scraping the sides of the bowl. A ceramic hot-knife tip, three voltage levels, and simple one-button controls let you warm and release your dab with precision. It’s compact, USB-C rechargeable, and comes with a protective cap for pocket-safe carry.
Key Features
Heated ceramic tip for smooth, mess-free loading
3 voltages (Blue / Green / Red) to match different concentrate textures
Two heat modes: quick cycle (double-click) or manual hold
USB-C charging with included cable
Protective cover cap for safe storage
550 mAh battery for plenty of reloads between charges
One-button operation—fast to learn, easy to use
Why You’ll Like It
Less mess: Warm the tip and your dab slides cleanly into the chamber—no more hard scraping.
Better control: Choose a lower level for softer waxes or higher for firmer concentrates like shatter.
Pocket-friendly: Lightweight, capped, and ready to travel.
How to Use the Crossing Heated Dab Tool
Remove the glass/plastic cap.
Power on: Press the button 5× to turn on (repeat to turn off).
Select voltage: Press 3× to cycle Blue → Green → Red.
Heat the tip:
Quick cycle: Press 2× to start a short auto heat.
Manual: Press & hold to heat while you load.
Scoop your concentrate, hover over the chamber, then warm the tip—after a few seconds the dab will slide offcleanly.
Replace the cap when finished and power off.
Tip: Use Blue/low for most waxes; bump to Red/high for firmer textures.
Battery & Charging
The integrated 550 mAh battery delivers many reloads per charge. Top up with the included USB-C cable. As with any small device, actual run-time will vary by heat level and usage.
Easy Cleaning
While the tip is still warm (not red-hot), wipe it with a vape-safe cleaning wipe to remove residue. Keep the protective cap on during storage to extend tip life and prevent debris.
Specifications
Tip
Ceramic heated “hot-knife” style
Heat Levels
3 voltages (Blue / Green / Red)
Controls
1 button • 5× power • 3× level • 2× cycle • hold to heat
Battery
550 mAh (integrated)
Charging
USB-C
Cap
Included protective cover
Use Case
Loading wax pens & e-rig chambers
What’s in the Box
Crossing Heated Dab Tool (Hot Knife)
Protective tip cover
USB-C charging cable
Owner’s manual
FAQs
Which heat level should I use?
Start on Blue for softer waxes. If the dab doesn’t release cleanly, step up to Green or Red for firmer concentrates like shatter.
How do I keep the tip clean?
Wipe the tip while warm with a vape-safe cleaning wipe every few sessions. Avoid scraping with metal tools.
Will it work with my wax pen or e-rig?
Yes—this tool is brand-agnostic. It simply helps you transfer concentrates cleanly into most chambers.
Is there an auto shut-off?
The quick-cycle heat runs for a short, pre-set interval. Always power off when finished and replace the cap.
Safety Notes
The tip gets hot—keep away from skin, fabrics, and flammables.
Allow the tip to cool before capping or cleaning.
Charge with a quality USB-C cable and reputable power source.
Store capped, out of reach of children and pets.
Vector Mystique Single Flame Torch Lighter
The Vector Mystique pairs a sleek, vertical profile with one of the most comfortable ignition systems we’ve used. At 3.37" tall, 0.78" wide, and 0.94" deep, it’s slim, pocket-friendly, and built from metal for everyday durability.
Key Features
Side-Lever Ignition: Low-effort, natural thumb press to ignite and hold the flame
Ultra-Slim Vertical Design: Tall, narrow body for easy everyday carry
Large Flame Dial: Oversized adjuster at the base—turn with thumb and finger (no tool needed)
Metal Construction: Solid feel and long-lasting durability
Stylish Finishes: Metallic blue or gunmetal satin
The side-lever ignition is the star here: press the small metal lever that rests flush against the body to fire the torch, then keep it comfortably depressed as long as you need. Because you’re holding a lever—not pushing in or flicking sideways—it’s exceptionally easy on the thumb and a great choice for anyone with mobility or grip issues.
With its slim profile, simple operation, and large, easy-to-use flame adjustment, the Vector Mystique is an outstanding everyday carry torch lighter that blends comfort, style, and performance.
Vector Stratos Single Flame Torch Lighter
The Vector Stratos is a single flame torch lighter that stands out with its bold steampunk-inspired design and durable metal build. Compact at 2.87" tall, 1.30" wide, and 0.73" deep, it blends eye-catching style with practical performance.
Key Features
Steampunk Aesthetic: Unique industrial design with tactile controls
Protective Jet Cover: Prevents dust and debris from entering the flame jet
One-Press Ignition: Single button both opens the cover and ignites the flame
Metal Construction: Built to last with premium textured or glossy finishes
Adjustable Flame: Screwdriver-friendly control at the base
Unlike most lighters with exposed jets, the Stratos features a built-in protective cover that flips open as you ignite, keeping the torch clear and ready to use. The push-down ignition is highly tactile — one smooth press opens the cover and sparks the torch, making it feel as satisfying as it is functional.
Available in a textured matte black finish or a glossy sparkle burgundy reminiscent of a sports car, the Vector Stratosdelivers both style and substance for anyone who wants their everyday carry lighter to stand out.
Vector Summit Single Flame Torch Lighter
The Vector Summit combines the classic feel of a flint ignition with the power of a modern butane torch. Measuring 3.38" tall, 0.88" wide, and just 0.67" deep, this slim vertical design is perfect for everyday carry while still offering serious performance.
Key Features
Flint Ignition: Traditional spark-wheel design with modern torch flame
Slim Vertical Build: Compact, portable lighter with a narrow profile
Adjustable Flame Dial: Fingernail or screwdriver-friendly control at the base
Stylish Finishes: Available in gunmetal or bold red matte
Everyday Carry Ready: Lightweight and highly portable design
Instead of electronic ignition, the Vector Summit uses a classic flint-style spark wheel — just flick the wheel to spark, and the butane torch ignites with a clean, blue flame. This makes it a unique option for anyone who enjoys the tactile feel of a traditional lighter but wants the performance of a modern torch.
Sleek, stylish, and pocket-friendly, the Vector Summit is ideal for everyday carry or anyone who appreciates a lighter that blends classic design with modern function.
Vector Speed Single Flame Torch Lighter
The Vector Speed is a compact and powerful single flame torch lighter that delivers reliable performance with smart features in a stylish design. Measuring just 3" tall, 2.5" wide, and 0.75" deep, it’s easy to carry while offering the quality Vector is known for.
Key Features
Angled Flame: 45° flame output for more comfortable lighting
Flame Lock: Hands-free operation with simple thumb control
Fuel Gauge: Transparent window shows butane level at a glance
Large Adjustment Dial: Quickly fine-tune flame size from the base
Stylish Finishes: Available in vibrant colour fade or matte black
The intuitive thumb ignition makes the Vector Speed one of the easiest lighters to use. Just press down on the built-in safety, ignite with a push, and lock the flame on with an upward slide for continuous use. Whether you prefer the sleek matte finish or the eye-catching fade pattern, this lighter is designed to look sharp and work flawlessly.
Built for portability and performance, the Vector Speed Torch Lighter is an excellent choice for anyone seeking a reliable single flame torch that’s easy to use and maintain. With Vector’s reputation for quality, you can count on it for years to come.
Vector Ultra Slim Single Flame Torch Lighter
The Vector Ultra is a sleek, pocket-friendly torch lighter designed for everyday carry. Measuring just 2.4" tall, 1.36" wide, and only 0.45" deep, this ultra-slim design makes it one of the most compact single flame lighters available. Built from durable metal, it feels solid in the hand while staying light and easy to carry.
Key Features
Ultra-Slim Design: Just 0.45" deep for a discreet everyday carry
Angled Flame: 45° flame output for easier, more comfortable lighting
Simple Thumb Ignition: Push-to-the-side action with intuitive grip point
Durable Metal Build: Satin rose gold or metallic speckled blue finish
Adjustable Flame: Fine-tune with a coin or small screwdriver
Operating the Vector Ultra is simple and intuitive. Rest your thumb on the raised grip near the top, push to the side, and the angled flame ignites instantly. The compact flame adjuster at the bottom lets you dial in the flame size for your needs.
If you’re looking for a compact and stylish torch lighter that’s as slim as it is reliable, the Vector Ultra is a perfect choice. Sleek, discreet, and built to last, it’s ideal for anyone who values everyday carry performance without the bulk.
Vapvana All-Star Glass Bowl – Clean Flavour, Smart Airflow
Built specifically for the All-Star heater, the All-Star Glass Bowl brings clean, pure glass performance to your desktop setup. It mirrors the All-Star’s heater profile for efficient heat transfer and dense, flavour-rich vapour, while the glass build keeps the taste crisp and true.
Purpose-Built for the All-Star
This bowl’s geometry matches the All-Star heater shape for consistent extractions and smooth airflow. A replaceable fine-mesh screen is pre-installed, and extra screens are included so you can keep sessions fresh with minimal downtime.
Clear Without Lifting the Heater
A built-in 10 mm pass-through on the side lets you clear your piece without removing the heater head. It’s faster, cleaner, and easier - especially during back-to-back draws.
Fits Most Rigs Out of the Box
The bowl features a 14 mm male joint to pair with the majority of water pieces. Running an 18 mm rig like Vapvana’s Big League Bubbler? You’re covered—an 18 mm adapter is included.
Locked-In, Dialled-In
An included Keck clip (joint clip) secures your connection, helping prevent accidental pulls when you lift the heater or clear the piece.
What’s Included
All-Star Glass Bowl (profile-matched to All-Star heater)
Fine-mesh screen (installed) + extra screens
14mm male joint (bowl base)
18mm adapter
Keck clip (joint clip)
Vapvana All-Star Wired Kit – Affordable Powerhouse Ball Vape
The All-Star Wired Kit by Vapvana is the newest addition to their lineup of high-performance desktop vaporizers. Built with a stainless steel housing and a modular design, the All-Star delivers massive, reliable vapour at a fraction of the price of premium titanium units. If you’ve wanted to experience the upper echelon of ball vape performance without breaking the bank, this kit is your ticket.
Ball Vape Performance Without the Premium Price
The All-Star borrows from Vapvana’s proven design philosophy: powerful heat, efficient airflow, and dense, flavour-rich vapour. While the Screwball remains Vapvana’s flagship titanium heavy-hitter, the All-Star provides an affordable entry point into the same league of performance. With its stainless steel build, diffuser-style heating, and 300 2.5mm ruby balls, the All-Star is engineered to satisfy both daily users and connoisseurs alike.
Customizable Bowl for Microdosing or Full Sessions
One of the standout features of the All-Star is its two-in-one modular bowl. Use it in half-size mode for a 0.1g load - perfect for microdosing or solo use - or switch to full-size mode for a 0.2g load, ideal for sharing or when you want huge, lung-expanding clouds. This flexibility makes the All-Star a versatile choice, bridging the gap between efficiency and raw power.
Back-to-Back Power with Corded Convenience
Unlike portable units that rely on battery life, the All-Star is a corded desktop vaporizer. Once it heats up, it’s ready to deliver back-to-back sessions without losing performance. No downtime, no waiting—just consistent, dense vapour whenever you want it. For daily drivers who want reliability and endurance, a wired setup is the gold standard.
Engineered for Flavour and Reliability
The All-Star’s stainless steel heater and ruby ball-filled diffuser maximize thermal retention and airflow, ensuring every hit is smooth, flavourful, and potent. Combined with the modular bowl, glass joint adapters, and a digital PID temperature controller, the All-Star Wired Kit offers a complete package designed to perform for years.
What’s in the Box
All-Star Wired Heater (stainless steel, pre-assembled with rubies)
All-Star Modular Bowl with removable wooden handle
18mm and 14mm glass adapters for bowl
Digital Temperature Controller (PID)
Power cable (North American)
Heater stand
Scoop & Tamper Tool (SQP)
Wooden cleaning brush
Spare screens & O-rings
Why Choose the All-Star Wired Kit?
If you’re looking for a powerful, affordable ball vape that can stand toe-to-toe with premium models, the All-Star Wired Kit is a clear choice. It combines Vapvana’s reputation for dependable performance with a price point that makes top-tier vapour accessible to more enthusiasts. For anyone wanting to experience the next level of desktop vaporization, the All-Star delivers inning after inning.
Vapvana All-Star Cordless Kit – Wireless Ball Vape Power and Freedom
The All-Star Cordless Kit by Vapvana takes the same affordable power and performance of the All-Star lineup and removes the tether. With a cordless heater head and an organized wooden dugout dock, this system delivers massive, flavour-rich vapour without being tied to a wall. Designed for both flower and concentrates, the All-Star Cordless is a complete dual-use solution built for enthusiasts who want freedom, performance, and convenience in one package.
Wireless Performance, Desktop Reliability
Vapvana is known for its powerful ball vapes, and the All-Star Cordless continues that tradition with a stainless steel heater packed with 300 ruby balls (2.5mm). While the premium Ace system is made from titanium and uses gem-cut rubies with a larger bowl capacity, the All-Star Cordless provides a more accessible entry point to the same high-level performance. You still get dense vapour, strong flavour, and dependable heat - now with true wireless convenience.
Dual-Use Design: Flower or Concentrates
What sets the All-Star Cordless apart from the wired version is its dual-use capability. Out of the box, it’s ready for flower with the All-Star Modular Bowl, which can be used in half-size mode (0.1g microdose) or full-size mode (0.2g heavy hits). But the kit also includes a 25mm quartz auto-spinner banger with pearls and marble top, making it a fully capable concentrate system as well. With the included glass reducer, you can fit the banger onto 10mm or 14mm rigs.
The Dugout Dock: Organized and Ready
The wooden dugout dock is the control centre of the All-Star Cordless Kit. It holds the digital PID controller, heating coil, heat shield, heater stand, and all included accessories in one compact station. Built-in slots for 10mm, 14mm, and 18mm joints mean you can keep everything neatly in place. This isn’t just a heater - it’s a complete desktop setup designed for convenience and everyday use.
Freedom vs. Endurance
Going cordless means you gain tether-free freedom to move and use your setup without being locked to a wall plug. The trade-off is that, unlike the wired version, you won’t get endless back-to-back sessions without breaks. For many users, the ability to untether more than makes up for it, especially with the added dual-use flexibility and all-in-one dock design.
What’s in the Box
All-Star Cordless Heater (stainless steel, pre-assembled with rubies)
All-Star Modular Bowl with removable wooden handle
Heating Coil Assembly (25mm “Hot Hole”)
Wooden Dugout Dock with built-in accessory slots
Quartz Banger (25mm Auto Spinner) with pearls and marble top
Glass Reducer (14mm to 10mm)
Digital Temperature Controller (PID)
Power cable (North American)
Heater Stand Post for the dock
Scoop & Tamper Tool (SQP)
Wooden Cleaning Brush
Spare screens, o-rings, and screws
Why Choose the All-Star Cordless Kit?
If you want premium ball vape performance in a complete, organized package at an affordable price, the All-Star Cordless Kit is your answer. With wireless freedom, dual-use compatibility, and Vapvana’s reputation for reliable performance, this system is built to impress. Whether you’re chasing massive clouds, rich flavour, or the convenience of a docked all-in-one setup, the All-Star Cordless delivers inning after inning.
Puffco Pivot Glass Stems – Enhance Your Portable Concentrate Experience
Upgrade your Puffco Pivot with cooler, smoother, and more flavorful vapor using one of four premium glass stem options designed for enhanced performance.
Overview
The Puffco Pivot already delivers excellent concentrate performance with its stock silicone mouthpiece, but switching to a glass stem instantly elevates flavor, cooling, and overall smoothness. These four custom stems offer improved airflow, increased vapor path length, and specialty cooling features—all without compromising portability.
🔧 Simple Installation – Secure Fit
Each stem is designed to fit the Pivot perfectly. Just open the atomizer lid and slide the glass stem under the silicone lip. It locks into place the same way as the lid and stays secure until removed.
💨 Why Upgrade to Glass?
Glass provides cooler vapor, smoother airflow, and cleaner flavor. These stems extend the vapor path while adding features like bead-filled chambers, spike diffusers, and water filtration. The result is smoother, cooler, and more enjoyable hits—no bulk or extra attachments required.
🧪 Choose Your Cooling: 4 Stem Options
🚀 The Puffco Pivot Evolution Stem
Ideal for users who want maximum dry cooling in a compact form. This 2.5-inch stem is filled with multicolor glass beads that increase internal surface area, slowing vapor and pulling heat before it reaches your lips.
Length: 2.5 inches
Cooling Method: Multicolor glass bead fill
Best for: Maximum dry cooling
🌵 The Puffco Pivot Cactus Stem
At only 1.5 inches long, the Cactus Stem offers compact cooling with three pairs of internal spikes that break up vapor flow and reduce heat. Perfect for on-the-go use with minimal size increase.
Length: 1.5 inches
Cooling Method: Triple-spike vapor disruption
Best for: Discreet cooling with minimal bulk
💧 The Puffco Pivot BubbleStem
For the smoothest possible draw, the 3.5-inch BubbleStem features a small built-in water chamber that functions like a mini bubbler. Just a small amount of water dramatically reduces throat harshness and cools vapor effectively.
Height: 3.5 inches
Cooling Method: Built-in water chamber
Best for: Maximum cooling and smoothness
🔥 The Puffco Pivot 3D Bent Stem
The longest and coolest dry stem in the lineup. The 5.5-inch 3D Bent Stem is packed with full-length 3D cooling spikes that increase surface contact and strip heat from vapor as it travels. A top choice for users seeking dry cooling without sacrificing flavor.
Length: 5.5 inches
Cooling Method: Full-length 3D cooling spikes
Best for: Maximum dry cooling with superior flavor
📦 Features at a Glance
All stems fit securely under the Pivot lid system
No tools or adapters required
Improved cooling and smoother vapor
Made from durable borosilicate glass
100% compatible with all Puffco Pivot units
Final Thoughts
The Puffco Pivot is already one of the most capable portable concentrate vaporizers available, but adding a glass stem unlocks a major upgrade in flavor, cooling, and smoothness. Whether you want compact portability or full cooling performance, this lineup gives you the freedom to customize your Pivot exactly how you like it.
Choose the stem that fits your style and elevate your Pivot experience.
Sneaky Pete Vaporizers — Your source for premium Puffco accessories and performance glass.
The Triple Play Pipe – A Classic Shape With a Functional Twist
Meet the Triple Play Pipe: a familiar favourite reimagined with a subtle yet powerful design upgrade. This is the kind of water pipe that feels instantly familiar — but delivers more flavour, more cooling, and more compatibility with your favourite setups. Whether you’re using a vaporizer with a 14mm water pipe adapter or just love the smooth chug of a great piece, this one’s built for performance.
🔹 Classic Bong Shape – Modern Function
Standing at a compact 10 inches tall, the Triple Play Pipe sports a time-tested silhouette: a broad cone-shaped base for water volume, leading up to a slightly flared comfort-fit mouthpiece. Not too big, not too tight — just right for easy draws and flavour-packed sessions.
🔹 Built for Vaporizers and Adapters
This pipe features an 18mm joint with a 14mm downstem, giving you broad compatibility across most 14mm water pipe adapters used in the vaporizer world. If your vape has a WPA, chances are this piece is plug-and-play.
🔹 The Iconic Chug – With Airflow Upgrades
At the base of the removable downstem, you’ll find a 6-slit classic tube percolator — a tried-and-true design that gives you that deep, familiar bong rumble with a touch of extra airflow. The added side slits help open up the pull, balancing backpressure with satisfying diffusion.
🔹 Triple Chamber Splash Protection
What sets the Triple Play Pipe apart is its upper section. Nestled between the water reservoir and the mouthpiece is a visually striking triple-glass splash catcher. This triple-tiered structure doesn’t just look cool — it actively reduces water splashback, keeping your lips dry and your session clean. It’s a rare blend of form and function in one smooth piece.
🔹 Designed for Ball Vapes – But Great With Any Setup
If you’re using a ball vape or another high-performance desktop vaporizer, you’ll appreciate the cooling capacity here. The large base holds enough water for heat dissipation, while the airflow and percolation aren’t so intense that they mute flavour. It’s the sweet spot between smooth and tasty.
📦 Features at a Glance:
Height: 10” tall
Joint: 18mm female with included 14mm downstem
Percolator: Classic tube-style with 6 diffusion slits
Unique triple-glass splash catcher section
Cone-style base holds solid water volume for cooling
Comfort-fit mouthpiece
Compatible with 14mm water pipe adapters
Ideal for use with vaporizers
🚀 Final Thoughts
The Triple Play Pipe is exactly what it sounds like — a three-way win: iconic design, vaporizer compatibility, and standout splash control. Whether you’re upgrading your setup or adding a new daily driver to your rotation, this piece delivers classic function with a premium touch.
Extra Large Chill Ice Cube Tray Set
The ultimate ice solution for your Chill Steel Pipe. This custom-moulded tray is designed to create the largest possible ice cubes that will still fit perfectly inside your Chill Pipe — no wasted space, no compromises.
Made Specifically for Chill Steel Pipes
Each tray produces seven extra-large cubes engineered to match the internal dimensions of your Chill Pipe. That means you get maximum ice volume for a longer-lasting chill — keeping your water icy cold for up to 24 hours.
Why Use This Instead of Regular Ice?
Perfect Fit — No jamming or melting cubes to make it work
Maximum Chill — Fills the pipe with ice for extended cooling
Purpose-Built — Designed for your Chill, not your cocktail
A Must-Have Accessory
Using regular freezer ice just doesn't cut it. With this tray, you're always ready to load up your Chill Pipe with precision-sized cubes that perform better and last longer. It’s the easiest upgrade you'll ever make.
What’s Included:
1 x Extra Large Ice Cube Tray (7 cube capacity)
Made from durable, food-safe silicone
Upgrade your Chill experience with the ice tray designed to match it — because Chill deserves better than standard cubes.
Chill Lid & Plug Set
Take your Chill Steel Pipe anywhere — without the mess. This custom lid and plug combo seals both ends of your Chill, making it 100% travel-ready and leakproof.
Travel with Ice-Cold Confidence
Whether you’re heading to a friend’s place or just out for the day, this set lets you pre-load your Chill with water and ice at home, seal it tight, and enjoy icy cold hits anywhere. It stays cold for up to 24 hours, so you’re always ready to chill on the go.
Engineered for a Tight, Leakproof Seal
Custom-designed waterproof plugs for both openings
Keeps water locked in and spills locked out
Built for mobility without sacrificing performance
Pairs Perfectly With:
Want the full mobile Chill setup? Use it with our Extra Large Chill Ice Cube Tray to pre-load your pipe with perfectly sized cubes before you head out. No melting mess, no hassle.
What’s Included:
2 x Top Lid Plug
1 x Downstem Plug
For Chill owners who like to keep it cold and keep it moving — this is your go-to upgrade.
The Box by LidaVel — Electronic Vapor/Dab Cooling System
Experience cooler, smoother hits — The Box by LidaVel is a premium electronic cooler designed to chill vapour or dabs without sacrificing flavor.
Sorry, your browser doesn’t support embedded videos.
Watch The Box in action — chilling your hits while preserving flavor.
Overview
The Box by LidaVel is built to cool your vapor or dabs using advanced electronic chilling technology. In just a few minutes, it transforms your sessions — reducing throat irritation, enhancing flavour, and delivering smoother inhale experiences.
Ships from U.S. 🇺🇸 with fast service and dedicated support via SneakyPeteStore.com.
Key Features
Electronic Cooling: Cools in 2–5 minutes to maintain steady chilled output.
14mm Compatibility: Supports most vaporizers, rigs, and glass pieces with 14mm joints.
Easy Maintenance: Removable glass cover and included cleaning tools.
High-Quality Materials: German borosilicate glass, food-safe aluminum, and medical silicone.
Elegant Design: Sleek, minimal, and built for performance and aesthetics.
What’s Included
The Box electronic cooling unit
Glass cover (removable)
14mm Bowl XL
Down stem
Two hookah hoses (0.5m & 1m)
14mm adapters
Cleaning corks
Handle for hose
Glass adapter
Cleaning tools
Power supply cord
Tray/base
Frequently Asked Questions
How does The Box cool vapor and dabs?
It uses electronic cooling technology to reduce vapor temperature quickly and consistently without compromising flavor.
Is it compatible with all vaping rigs?
It works with any device with a standard 14mm glass joint, including desktop vapes and dab rigs.
How easy is it to clean?
Very easy — the glass cover pops off, and the included tools let you do full maintenance in minutes.
What’s it made from?
Premium German borosilicate glass, food-grade aluminum, and medical-grade silicone for durability and purity.
What warranty is included?
It includes a 5-year service warranty for peace of mind with your investment.
Final Thoughts
If you want smoother, cooler, and cleaner sessions, the Box by LidaVel is one of the top cooling upgrades you can get. It brings advanced tech to your setup in a thoughtful, reliable package.
Read our full review here.
Glitterbomb – The Ultimate Indestructible Ice Bong
Turn Heads. Hit Smooth. Never Break.
Meet the Glitterbomb — a limited edition stainless steel bong that’s part art piece, part performance machine. With a stunning glitter finish and a construction built to last a lifetime, this is the kind of pipe you don’t hide in a drawer — you display it proudly and use it relentlessly.
Unbreakable Design with Stainless Steel Power
Made from double-wall, vacuum-insulated stainless steel, the Glitterbomb doesn’t just look incredible — it’s built to withstand anything. The interior features a patented ceramic lining for pure flavour and smooth vapour, giving you the taste of glass with none of the fragility.
Limited Edition Glitter That Lasts
The name says it all — this pipe explodes with colour. The glittering finish is fully sealed and protected, so it won’t fade, flake, or come off during cleaning. This is a true statement piece that’s made to be admired and used.
Engineered for Icy Cool Hits
Twist off the neck, drop in ice, add water, and enjoy the kind of cooling power only vacuum insulation can provide. The Glitterbomb keeps ice frozen for hours, giving you smoother, colder sessions without the constant refill.
Pure Performance from Top to Bottom
Every Glitterbomb includes a glass bowl and indestructible aluminium downstem, with a 14mm female joint that works seamlessly with most vaporizers and water pipe adapters. Food-grade silicone seals keep every hit clean and tight.
Built for Daily Use. Designed to Last Forever.
If you're tired of broken glass, weak cooling, or short-lived gimmicks, the Glitterbomb is your upgrade. Clean it like glass, use it like steel, and never worry about shattering your favourite piece again.
Highlights:
Limited edition glitter finish – fully sealed and protected
Indestructible stainless steel body with double-wall insulation
Patented ceramic interior for pure taste
Compatible with vaporizers and 14mm adapters
Comes with aluminium downstem and glass bowl
Made to handle ice like a champ – cool, smooth, and clean
The Glitterbomb is more than just durable — it's unforgettable. Whether you’re looking for your last bong ever or your most impressive one yet, this pipe delivers in every way.
Tommy Chong x Chill Pipe – Limited Edition Paisley Collection
Retro Vibes. Modern Chill.
The Tommy Chong Limited Edition Chill Pipe – Paisley Collection is a tribute to cannabis culture, style, and one of its most legendary icons. Featuring bold bandana-inspired paisley prints in classic red or blue, this drop brings serious nostalgia with the rugged, high-performance design Chill Pipes are known for.
Old-School Cool Meets New-School Engineering
Behind the vintage paisley print is the Chill Pipe’s legendary stainless steel body — double-wall vacuum insulated to keep your ice colder, longer. The ceramic-lined interior delivers clean, flavour-rich hits with no metallic aftertaste, all wrapped in a bold, collectible shell stamped with Tommy Chong’s seal of approval.
The Chill That Never Quits
Twist off the top, load it with ice, and enjoy icy-smooth draws that last for hours. The durable steel build means no risk of breaking, and no babying required — this is a bong that’s built to use.
Why You Want This Pipe
Exclusive paisley artwork (Official Tommy Chong collab) in red or blue — loud, proud, and collectible
14mm female joint compatible with most bowls & vapes
Glass bowl + indestructible aluminium downstem
Food-grade silicone seals for a perfect, airtight fit
Double-wall vacuum insulation – keeps ice frozen for hours
Ceramic-lined interior – clean hits, no metal taste
Ultra-durable stainless steel body – built to travel, built to last
Easy to clean – just use isopropyl alcohol
Whether you’re lighting up in the backyard or headed to the next sesh, the Tommy Chong x Chill Pipe delivers heavyweight chill with heavyweight style. Limited run. Maximum vibe.
Rubberized Chill Steel Pipe – Rugged, Reliable, and Ready to Chill
Built to Last. Designed to Perform.
The Rubberized Chill Steel Pipe is an absolute beast — combining rugged durability with smooth, icy performance. Featuring a rubberized matte exterior that feels as solid as it looks, this water pipe is made to handle daily use, travel, and any adventure you throw at it. Whether you’re using it at home or on the go, it’s the definition of reliable.
Rugged Finish. Pure Function.
The rubberized coating adds extra grip and a tactical, stealthy look. This is a pipe you’ll want to use and not worry about. The tough exterior adds protection without compromising on style, and the internal construction is just as serious.
Vacuum-Insulated Stainless Steel Core
Inside the steel body, you’ll find double-wall vacuum insulation for unbeatable ice retention. Add to that the ceramic-lined interior, and you’ve got a bong that delivers clean, flavourful hits every time — no metallic taste, no compromise.
Chill Hits Stay Cold Longer
Twist off the neck, drop in ice, and enjoy hours of cool, smooth vapour. Thanks to the vacuum insulation, the Chill holds its temperature far longer than any standard glass bong — and with no risk of shattering along the way.
Includes a Complete, Tough Setup
Each Chill Steel Pipe comes ready to roll with a glass bowl and an indestructible aluminium downstem. The 14mm female joint works with your favourite vapes and adapters, and food-grade silicone seals keep everything tight and clean.
Why Choose the Chill Pipe?
Durable rubberized matte finish – extra grip, sleek look, rugged feel
Unbreakable stainless steel body with double-wall insulation
Glass-like ceramic interior for flavourful, pure draws
Designed to handle ice and cold retention better than glass
Includes aluminium downstem and glass bowl
Low-maintenance and easy to clean with isopropyl alcohol
When you want a bong that’s low-profile in colour but high-performance in function, the Rubberized Chill Steel Pipe is your go-to. Strong, subtle, and seriously satisfying — this is a daily driver with zero compromise.
Mirror Chill Pipe – Limited Edition Stainless Steel Ice Pipe
Sleek. Smooth. Unbreakable.
Meet the Mirror Chill Pipe, a limited edition masterpiece that blends high-end function with polished perfection. Featuring a striking mirror finish and indestructible stainless steel construction, this is more than a pipe — it’s a statement. Built to perform, built to last, and built to turn heads.
Unbreakable by Design, Cool by Nature
Crafted from double-wall, vacuum-insulated stainless steel, the Mirror Chill Pipe is engineered for everyday use with zero compromise. Inside, a patented ceramic lining delivers the clean, smooth taste of glass — without the risk of ever breaking it.
Striking Mirror Finish – Built to Shine
The high-gloss, mirror-polished exterior isn't just for looks — it’s sealed and protected to resist scratches, stains, and wear. This pipe doesn’t just sparkle out of the box; it stays flawless with every use and clean.
Engineered for Ice-Cold Rips
Twist off the top, drop in ice, and let vacuum insulation do the work. The Mirror Chill Pipe keeps ice solid for hours, delivering colder, smoother hits than traditional glass — without the hassle of constant refills.
Serious Performance, Seamless Compatibility
Each Mirror Chill Pipe includes an ultra-durable anodized aluminium downstem and glass bowl, with a 14mm female joint that pairs easily with most vaporizers and water pipe attachments. Food-grade silicone seals ensure every hit is tight, clean, and satisfying.
Built to Be Your Forever Piece
Tired of fragile glass and gimmicky designs? The Mirror Chill Pipe is your upgrade — sleek, strong, and made to go the distance. Easy to clean, impossible to break, and beautiful enough to display.
Highlights:
Limited edition mirror-polished finish – sleek and scratch-resistant
Vacuum-insulated stainless steel body for extreme durability
Patented ceramic interior delivers pure flavor
Compatible with 14mm vaporizers and water pipe adapters
Includes glass bowl and anodized aluminium downstem
Engineered for long-lasting ice retention and ultra-cool hits
The Mirror Chill Pipe is more than a pipe — it’s a legacy piece. If you’re ready to own the last pipe you’ll ever need, this is it.
Dr. Dabber Switch 2: The Ultimate High-Performance E-Rig for Concentrates
For those who prioritize pure dab quality above all else, the Dr. Dabber Switch 2 is a best-in-class concentrate vaporizer that delivers unmatched flavour, precision heating, and efficiency. Built with advanced induction technology, it offers a customizable experience designed to extract the best from your concentrates.
Why the Dr. Dabber Switch 2 Stands Out
1. Patented IR Sensor Technology for Unmatched Precision
Exclusive to the Switch 2, IR sensor technology ensures unparalleled temperature control, making it the first e-rig ever with an integrated IR sensor. This advanced system delivers precision heating that adapts in real time to maintain optimal performance.
2. Omni-Directional Induction Heating for Even Extraction
Unlike traditional coil-based heating systems, the Switch 2 uses advanced induction heating, providing true omnidirectional heating. This ensures the insert heats evenly from the sidewalls and base simultaneously, creating a balanced, efficient vaporization process.
3. No More Failing Atomizers
Included with the Switch 2 is a 20mm Quartz Insert, a 300% increase in volume from the original Dr. Dabber Switch capacity. This expanded chamber allows for dabs of all sizes, offering a consistent, long-lasting experience without the risk of failing atomizers.
4. Dynamic Heating Modes: A True Game-Changer
By refining the heating curves, the Switch 2 introduces three advanced profiles to enhance your session:
Descent Mode: The default setting, which replicates traditional torch dabbing by reducing temperature 1°F per second during your hit. This preserves terpenes and eliminates the burnt taste.
Ascent Mode: Perfect for cold starts and terpene chasing, gradually increasing temperature for a smooth low-temp experience.
Steady Mode: Maintains a stable temperature throughout your hit, dynamically adjusting based on dab size and inhalation rate.
5. App-Enabled Customization
Take control with the Dr. Dabber App, allowing you to:
Customize temperature profiles
Adjust hold times and session lengths
Modify light modes for a personalized experience
Specifications
Material Compatibility: Concentrates
Temperature Range: 250-650°F
Heat-Up Time: 5-30 seconds (depending on setting)
Battery Life: Up to 50 heating cycles per charge
Charging Time: 60-90 minutes for a full charge
Charging Type: USB-C pass-through charging
Warranty: 2-year warranty on battery, charger, and electrical components
Dimensions: Height 9" | Width 4" | Weight 25.6 oz
What's in the Box?
Dr. Dabber Switch 2 Device
Switch 2 Quartz Insert
Switch 2 Carb Cap
Switch 2 Glass Attachment
Dr. Dabber Drop™ Heated Loading Tool
36W Charger
1M USB-C Charging Cable
Who is the Switch 2 For?
Concentrate enthusiasts looking for the best dab experience available.
Users who want full temperature control for optimal extraction.
Those who prefer induction heating over traditional coil-based setups.
Anyone looking for a high-end, long-lasting e-rig with premium performance.
Final Thoughts
The Dr. Dabber Switch 2 is engineered for those who demand the absolute best dab quality. With fast heat-up times, patented IR sensor technology, dynamic heating modes, and advanced induction heating, it delivers flawless, high-performance sessions every time. Whether you're a seasoned concentrate user or upgrading to a top-tier device, the Switch 2 is built to exceed expectations.
Read our blog for a full review of the Dr. Dabber Switch 2.
The PreClean Dry Ash Catcher – Keep Your Bong Cleaner with First-Stage Filtration
Whether you combust or vaporize, keeping your bong clean can be a challenge. That’s where The PreClean Dry Ash Catcher comes in. Acting as a first-stage filtration system, this glass ash catcher is designed to trap ash, flower, and debris before they enter your bong—making it one of the most effective ways to keep your bong cleaner for longer.
It’s much easier to clean a compact glass ash catcher than a large water pipe, and once you start using this kind of bong accessory, you’ll immediately notice the difference in cleanliness and maintenance.
Works with Combustion or Vapour
If you use combustion, this ash catcher for bong setups helps collect the majority of ash right at the bowl, preventing it from clogging up your water pipe.If you’re a vaporizer user, it works like a dry herb catcher, grabbing loose flower bits that would otherwise drop into your bong and gunk it up.
Designed for Larger Setups
These ash catchers have a solid build and a noticeable weight, so they're best paired with larger, heavier water pieces. They will shift the centre of gravity of your setup, so we recommend pairing them with stable bases.
Two Versions – Choose What Fits Your Setup
Twister (Large – Dual Twisting Interior)
A visual standout with serious function, this large dry ash catcher features a dual-twist interior design that looks incredible as vapour passes through. It offers smooth airflow and effective dry filtration—perfect for full-size bong setups.
Shorty (Compact – Opposing Glass Filters)
Smaller and lighter, this compact ash catcher fits medium and smaller bongs with ease. Its dual opposing glass filters efficiently trap ash and flower bits while keeping your rig more balanced and portable.
