The Evolution Stem for the Arizer Go SRT is the ultimate dry cooling upgrade for users who want the smoothest possible experience without adding a water piece. Built around a widened cooling chamber filled with clear glass beads, this stem dramatically increases vapor path disruption and heat absorption for a cooler, more comfortable draw.
If your goal is maximum cooling while keeping things simple and dry, this is the stem to choose.
The Maximum Cooling Dry Stem
Some users prefer the simplicity of a dry stem but still want the coolest vapor possible. That’s exactly what the Evolution Stem is designed to deliver.
Once vapor exits the device, it enters a wider chamber packed with glass beads. Instead of moving straight to your mouth, the vapor is forced to travel through and around the beads, creating a more complex path that cools it significantly before it reaches you.
Glass Bead Cooling Chamber
The defining feature of the Evolution Stem is its enlarged cooling section filled with clear glass beads. These beads serve two key functions:
Disrupt the vapor path, forcing a longer and more complex airflow route
Act as a heat sink, absorbing and holding heat during your session
That absorbed heat is warmth you’re not inhaling, resulting in a noticeably cooler overall experience.
Cooler Vapor Without Water
For users who don’t want the extra setup or maintenance of a water piece, the Evolution Stem delivers the coolest dry vapor experience possible.
It achieves this by combining:
Extended vapor travel
Increased surface area
Heat absorption from the glass beads
The result is smoother, more comfortable vapor even at higher temperatures.
Built-In Glass Screen
The Evolution Stem includes a built-in glass screen, eliminating the need for stock pods or removable metal screens.
No loose metal screens
No pods required
Less hassle when loading, unloading, and cleaning
You still get strong airflow, but with a cleaner, simpler setup.
Ideal for Higher Temperatures
The Arizer Go SRT is capable of producing dense, powerful vapor. The Evolution Stem helps manage that intensity by cooling the vapor before it reaches your mouth.
This makes it ideal for:
Higher temperature sessions
Larger, denser draws
Users looking for the smoothest dry hits possible
Easy to Clean
Despite its advanced design, the Evolution Stem is easy to maintain. Like any glass stem, it can be cleaned with a simple soak.
Because of the internal bead chamber, it may take slightly longer to dry than a standard stem. Placing it in front of a small fan can help speed up the process.
Key Features
Maximum dry cooling design for Arizer Go SRT
Wide cooling chamber filled with glass beads
Increased vapor path disruption for cooler draws
Glass beads act as a heat sink
Built-in glass screen with no pods or metal screens required
Strong airflow with effective cooling
Ideal for high temperature sessions
Easy to clean
FAQ
What makes the Evolution Stem different from a standard stem?
The Evolution Stem uses a bead-filled chamber to disrupt airflow and absorb heat, creating a significantly cooler dry vapor experience compared to a standard straight-through stem.
How does it compare to the 3D Flow Stem?
The 3D Flow Stem improves cooling through airflow disruption, while the Evolution Stem goes further by using a larger bead-filled chamber for maximum cooling. It prioritizes smoothness over raw flavor intensity.
Do I need pods or metal screens with this stem?
No. The built-in glass screen eliminates the need for pods or metal screens entirely.
Does it still have good airflow?
Yes. It maintains strong airflow while adding significant cooling through its internal structure.
Is it good for higher temperature use?
Yes. It’s one of the best options for high temperature sessions when you want smoother, cooler vapor without using water.
Is it hard to clean?
No. It cleans easily with a soak like any glass stem. Drying may take a bit longer due to the bead chamber.
Final Thoughts
The Evolution Stem for the Arizer Go SRT is the best option for users who want maximum cooling in a dry setup. With its bead-filled chamber, built-in glass screen, and efficient airflow, it delivers a smoother experience without adding complexity.
If you want the coolest possible dry vapor, this is the upgrade to get.
See our full review of the Arizer Go SRT Glass Accessories here
The 3D Flow Stem for the Arizer Go SRT is designed for users who prefer a dry setup but still want cooler, smoother vapor. Featuring a unique 3D internal glass spike design, this stem disrupts airflow to reduce heat and improve comfort without needing water filtration.
If you like the simplicity of a dry stem but want a more refined experience, this is a meaningful upgrade.
Advanced 3D Cooling Design
Unlike a standard straight-through stem, the 3D Flow Stem uses strategically placed inverted glass spikes to interrupt and redirect airflow.
Instead of traveling directly from the bowl to your mouth, vapor is forced through a more complex path. This increases surface contact and allows heat to dissipate before it reaches you.
The result is noticeably cooler, smoother vapor without adding water.
Cooler Vapor Without Water
Water filtration isn’t always practical. It adds setup, maintenance, and isn’t ideal for portability.
This stem offers a simpler alternative by providing:
Improved cooling through airflow disruption
Heat absorption from internal glass spikes
Smoother inhales without needing a water piece
You keep the simplicity of dry use while reducing harshness.
Two Length Options
The 3D Flow Stem is available in two sizes:
Regular Length - Matches the original stem and works with the magnetic cap for easy transport
Extended Length - Adds extra length for increased cooling and a more relaxed draw
If portability matters, go regular. If you want more cooling, the extended version delivers.
Perfect for Higher Temperatures
The Arizer Go SRT can produce dense, powerful vapor. This stem helps manage that intensity by cooling vapor before it reaches your mouth.
Ideal for:
Higher temperature sessions
Larger draws
Smoother dry hits
Simple, All-Glass Experience
With full glass construction, you get a clean vapor path and easy maintenance.
No extra parts
Easy to clean
Pure flavor with all-glass airflow
It’s a straightforward upgrade that improves comfort without adding complexity.
Key Features
3D internal glass spike design for airflow disruption
Improved cooling without water filtration
Available in regular and extended lengths
Regular version supports magnetic cap
All-glass construction
Compatible with Arizer Go SRT
Great for high temperature sessions
FAQ
What makes this different from a standard stem?
The internal glass spikes disrupt airflow and absorb heat, creating a longer vapor path that cools the vapor before you inhale.
Do I need a water pipe with this?
No. This stem is designed for dry use while still improving cooling and smoothness.
What’s the difference between regular and extended?
The regular version matches the original stem and works with the magnetic cap, while the extended version adds length for more cooling.
Does it affect airflow?
It slightly changes the draw feel, but is designed to maintain strong airflow while improving cooling.
Is it easy to clean?
Yes. It can be cleaned with a simple soak and rinse like any glass stem.
Is it worth upgrading from the stock stem?
If you want cooler, smoother vapor without using water, it’s a noticeable upgrade over the standard stem.
Final Thoughts
The 3D Flow Stem for the Arizer Go SRT is a simple and effective way to improve dry use. It cools vapor, smooths out the experience, and keeps everything easy to use.
If you want better dry sessions without adding complexity, this is an easy upgrade.
See our full review of the Arizer Go SRT Glass Accessories here
The All-Glass 14mm Water Pipe Adapter for the Arizer Go SRT is the simplest and most effective way to connect your device to a water piece. Designed as a one-piece solution with a built-in glass screen, it eliminates the need for pods and metal screens entirely.
The result is a cleaner airflow path, easier loading, and a much smoother experience - especially when running higher temperatures or taking larger draws.
The Cleanest Way to Use Your Go SRT with Glass
The original setup requires a two-piece system - a pod with a metal screen, plus a separate water pipe adapter. While it works, it adds unnecessary complexity.
This all-glass adapter simplifies everything into a single, streamlined piece. No loose screens, no extra parts, no fiddling - just load and go.
Built-In Glass Screen Design
This adapter features a permanent glass screen with four airflow holes, giving you strong, consistent airflow without relying on metal screens.
No metal screens to install, adjust, or lose
Consistent airflow with a simple 4-hole design
All-glass vapor path for a cleaner experience
You get all the performance without the hassle.
Why Ditch the Metal Screens?
The stock metal screens don’t add much benefit in real-world use, but they do create friction:
They can shift or fall out during use
They make loading more awkward
They often get lost when emptying your material
This all-glass design removes that entire problem. What you’re left with is a simpler, more reliable setup that just works.
Perfect for Water Pipe Use
The 14mm male connection makes this adapter compatible with most standard water pieces, allowing you to cool and condition your vapor for a smoother inhale.
This is especially useful when:
Running higher temperatures
Taking larger, more powerful draws
Wanting a smoother, less harsh experience
If you like to push your sessions a bit further, this is one of the best ways to do it.
One-Piece Simplicity
Instead of juggling a pod and an adapter, this combines everything into a single piece:
Load directly into the adapter
No assembly required
Fewer parts to clean and manage
It’s the most straightforward way to run your Go SRT through glass.
Easy to Clean and Maintain
With no metal screens and fully glass construction, cleaning becomes much easier. A simple soak is all it takes to keep things fresh.
No more dealing with tiny screens or trying to keep everything aligned.
Key Features
All-glass 14mm water pipe adapter
Built-in glass screen with 4 airflow holes
No metal screens required
One-piece design for maximum simplicity
Direct compatibility with Arizer Go SRT
Smoother vapor when used with water filtration
Easier loading, unloading, and cleaning
FAQ
Do I still need to use pods with this adapter?
No. This is a complete one-piece solution with a built-in glass screen, so you can load directly into the adapter without using pods.
Is this compatible with the Arizer Go SRT?
Yes. This adapter is specifically designed to work with the Arizer Go SRT and fits properly without modification.
What size water piece does this fit?
This is a 14mm male adapter, making it compatible with most standard 14mm female water pipe joints.
Does the glass screen affect airflow?
No. The four-hole glass screen is designed to maintain strong airflow while eliminating the need for metal screens.
Is this better than using the stock setup?
If you want a simpler, cleaner, and more user-friendly experience, this is a significant upgrade over the stock pod and metal screen system.
Is it easy to clean?
Yes. The all-glass construction makes cleaning simple - just soak and rinse, with no small parts to manage.
Final Thoughts
The All-Glass 14mm Water Pipe Adapter for the Arizer Go SRT takes an already capable device and makes it easier to use, easier to maintain, and better suited for water pipe sessions.
If you want the cleanest, simplest way to run your Go SRT through glass, this is the upgrade that actually makes a difference.
See our full review of the Arizer Go SRT Glass Accessories here
The All-Glass Pods for the Arizer Go SRT are a simple but meaningful upgrade that improves one of the most overlooked parts of the device. Designed to replace the original pods, these feature a built-in glass screen that eliminates the need for metal screens entirely.
The result is a cleaner, easier, and more enjoyable experience - from loading to cleaning to everyday use.
A Better Take on the Arizer Go SRT Pod
The original pod design works, but metal screens create unnecessary friction in daily use. They can shift, fall out, and make both loading and unloading more frustrating than it needs to be.
These all-glass pods take that same concept and refine it into something far more practical. No loose parts, no fiddling, no guesswork - just a cleaner, more reliable setup.
Built-In Glass Screen Design
Each pod features a permanent glass screen with four airflow holes, giving you excellent airflow without the downsides of metal screens.
No loose screens to deal with or replace
Consistent airflow with a simple 4-hole design
Cleaner vapor path with all-glass construction
You still get strong performance, but with far less hassle.
Easier to Load, Empty, and Clean
This is where these pods really stand out. By removing the metal screen entirely, the entire workflow becomes smoother:
Easier loading with no screen shifting or falling out
Simple unloading without losing screens in your material
Quick cleaning thanks to the all-glass design
It’s a small change that makes a big difference over time.
Same Size, Full Compatibility
These pods are designed to match the exact size and fit of the original Arizer Go SRT pods, so you don’t lose compatibility with your setup.
Works with the Arizer Go SRT
Fits all compatible accessories
Drop-in replacement for original pods
No adjustments needed - just swap them in and go.
Less Hassle, Better Experience
The original metal screen system never added meaningful benefits beyond slight airflow differences, but it did add inconvenience.
These all-glass pods focus on what actually matters:
Simplicity - fewer parts, less frustration
Reliability - nothing to shift, lose, or replace
Ease of use - smoother sessions from start to finish
Key Features
All-glass pod design for cleaner airflow
Built-in glass screen with 4 airflow holes
No metal screens required
Easier loading and unloading
Simple cleaning process
Exact fit for Arizer Go SRT
Compatible with existing accessories
Sold individually, buy one or buy multiple
FAQ
Do these replace the original pods?
Yes. These are a direct replacement for the stock Arizer Go SRT pods, with a built-in glass screen instead of a removable metal one.
Do I still need to use metal screens?
No. The built-in glass screen eliminates the need for metal screens entirely.
Will these affect airflow?
No. The four-hole glass screen maintains strong, consistent airflow.
Are they compatible with accessories?
Yes. They match the size and shape of the original pods and work with all compatible accessories.
Are they easier to clean?
Yes. The all-glass design makes cleaning simple with no loose parts to manage.
Why switch to all-glass pods?
They eliminate the most frustrating part of the original design, creating a cleaner, simpler, and more reliable experience.
Final Thoughts
The All-Glass Pods for the Arizer Go SRT are one of those upgrades that just makes sense. By removing the weakest part of the original design, they deliver a cleaner, simpler, and more user-friendly experience without changing how the device performs.
If you use your Go SRT regularly, this is an easy quality-of-life upgrade you’ll notice every session.
See our full review of the Arizer Go SRT Glass Accessories here
Universal Baller Accessories & Replacement Parts
Everything you need to maintain, replace, and upgrade your Universal Baller — from glass components to airflow tuning and modular performance upgrades.
Overview
The Universal Baller Accessories Collection is your one-stop shop for keeping your setup running at peak performance. Whether you’re replacing a worn component, tuning airflow, or expanding your configuration, you’ll find genuine, purpose-built parts designed to preserve flavor, power, and modular flexibility.
Available Accessories & Upgrades
Glass Bowl Top Replacements
Microdose Adapters
High Airflow Discs
Quartz Inserts
Hybrid Bowl Complete Sets
Glass Joint Replacements & more
Vortex Adapter Set
Glass Bowl
Built for Modularity
One of the Universal Baller’s defining features is its fully modular design. These accessories let you fine-tune your setup for flavor, airflow, extraction speed, and bowl capacity — or restore your system to factory performance with genuine replacement parts.
Why Choose Official Universal Baller Parts?
Designed for Perfect Fit — OEM equipment engineered specifically for the Universal Baller platform.
Flavor-First Materials — glass, quartz, and precision-machined components preserve purity.
Performance Tuning — adjust airflow, thermal mass, and bowl style to match your session.
Long-Term Support — keep your system running like new instead of replacing the entire kit.
Final Thoughts
Whether you’re replacing a single component or building out a fully customized setup, the Universal Baller Accessories Collection gives you access to every upgrade and replacement you need in one place. It’s the easiest way to extend the life, performance, and versatility of one of the most advanced ball vapes on the market.
Sneaky Pete Vaporizers — Official Universal Baller accessories, replacement parts, and performance upgrades for US customers.
Mega Cube Replacement Downstem — Restore Dual-Input Performance
Break it, replace it, or upgrade — the easiest way to keep your Mega Cube performing like new.
This Mega Cube Replacement Downstem is the perfect solution for restoring your setup after an accident or simply keeping a spare on hand. Downstems are one of the most commonly damaged components during cleaning, and this low-cost replacement gets your Mega Cube back to peak performance in seconds.
Beyond replacement, this downstem also unlocks one of the Mega Cube’s most unique capabilities — true dual-input functionality. With both 14mm and 10mm compatibility, you can run two devices into a single water piece at the same time, making it ideal for heavy hitters, shared sessions, or anyone who enjoys experimenting with creative setups.
Features
Direct replacement: Designed specifically for the Mega Cube water piece.
Dual-input capability: Supports simultaneous 14mm and 10mm use.
Perfect spare part: Ideal backup for accidental breaks during cleaning.
Affordable upgrade: Restore your setup without replacing the entire piece.
Why Keep a Spare?
Glass accidents happen — usually during cleaning. Keeping a replacement downstem nearby means you’re never sidelined, and you can continue enjoying the full Mega Cube experience without interruption.
Sneaky Pete Vaporizers — Performance accessories and replacement parts designed to keep your gear running at its best.
Tempest Case — Storage, Tools & Protection
A precision-built storage and tool case designed specifically for the Tempest — durable, compact, and travel-ready.
Sorry, your browser doesn’t support embedded videos.
Overview
The Tempest Case by Mad Heaters is a purpose-built storage and tool solution designed to protect and support your Tempest. Built with a stainless steel body and silicone-lined interior, it keeps your device secure while integrating essential tools for everyday use.
Compact, durable, and thoughtfully designed, the Tempest Case is ideal for home storage or travel, keeping everything you need in one clean, organized package.
Tempest Case Features
Stainless Steel Body: Durable outer shell with a protective silicone-lined interior.
Aluminum Cap: Lightweight and precisely machined for a secure fit.
Integrated Herb Storage: Holds approximately 1–1.5 g of ground material.
Removable Debowler: Makes clearing the bowl quick and easy.
Built-in C-Tool: Convenient access for screen adjustments and maintenance.
Magnetic Lid: Integrated magnet and socket tool for handling Tempest caps.
Travel-Friendly Design: Keeps your Tempest protected and organized on the go.
Specifications
Materials: Stainless steel body, silicone liner, aluminum cap
Dimensions: 163 mm × 25 mm
Weight: 51 g
Storage Capacity: Approx. 1–1.5 g of ground material
Why Choose the Tempest Case?
The Tempest Case is designed with the same attention to detail as the Tempest itself. From integrated tools to rugged construction, it enhances daily use by keeping your device protected, accessible, and ready whenever you need it.
Final Thoughts
Whether you’re storing your Tempest at home or taking it on the road, the Tempest Case delivers reliable protection and smart functionality in a compact form. A must-have accessory for Tempest owners who value organization and build quality.
YLL DynaVap Decapper Stand — Hands-Free Cap Removal
A compact metal decapper stand with a strong magnet, designed for smooth, hands-free removal of any DynaVap cap — including HyperDyn and Armored caps.
Overview
The YLL DynaVap Decapper Stand makes removing a hot DynaVap cap fast, safe, and effortless. Just place your cap onto the magnet, give it a gentle lift or twist, and the stand takes care of the rest — no burned fingers and no awkward juggling.
It’s built from durable metal with a routed groove sized for all DynaVap tips, ensuring stable placement whether you’re using a standard cap, HyperDyn, or the heavier Armored Cap.
Key Features
Hands-Free Decapping — remove hot caps instantly with a smooth lift or twist.
Strong Center Magnet — grips any DynaVap cap securely, including large and heavy styles.
Precision Metal Build — durable, stable, and cut with a groove to hold the device firmly.
Compatible with Every DynaVap Cap — standard, HyperDyn, Armored, and specialty caps.
Great for Faster Reloads — cools caps quicker and improves session flow.
Why Use a Decapper Stand?
If you've ever tried to remove a hot DynaVap cap with your fingers, you know why this accessory exists. The Decapper Stand solves three common problems:
Hot caps that stay warm for longer — especially HyperDyn and Armored caps
Unstable surfaces when trying to cool or remove a cap
Interrupted session flow while waiting for safe handling temperatures
A decapper lets you lift the cap the moment you’re done heating, giving you quicker cooldowns and faster reloads every time.
Compatibility
Works with all DynaVap caps, including:
Standard Caps
HyperDyn Cap
Armored Cap
Compatible with every DynaVap tip and stem style.
Final Thoughts
The YLL DynaVap Decapper Stand is one of those small upgrades that instantly improves the way you use your DynaVap. With a strong magnet, clean metal construction, and full compatibility with all caps — even the big ones — it’s a simple tool that makes every session smoother, safer, and more enjoyable.
Sneaky Pete Vaporizers — premium DynaVap accessories shipped fast across the USA.
Puffco Proxy J-Hook — Premium Dry-Cooling Glass Attachment
Enhance your Puffco Proxy with dramatically cooler, smoother, water-free hits using this long, bead-filled custom J-Hook.
Overview
The Puffco Proxy J-Hook is a purpose-built glass attachment that replaces the small stock Proxy glass with a longer, smoother, and more cooling vapor path. Designed specifically for the Proxy—no adapters or fit issues—the J-Hook delivers a major upgrade in comfort while preserving the Proxy’s clean flavor and easy portability.
Custom Fit for the Proxy
Instead of using a standard 14mm J-hook with an adapter, this glass piece is engineered exclusively for the Proxy. The fit is secure, airtight, and optimized for airflow. At a full 8 inches in length, the J-Hook provides significantly more cooling distance than the original glass while remaining lightweight and easy to carry.
Inside the J-Hook is a chamber packed with hundreds of tiny glass beads. These beads increase internal surface area, creating a dense cooling matrix that pulls heat out of the vapor before it reaches your mouth. The result: smoother, cooler, easier pulls without needing a water rig.
Key Features
Made for any Puffco Proxy — perfect fit with no adapters required.
8-Inch Vapor Path — long, elegant shape for excellent dry cooling.
Glass Bead Chamber — hundreds of beads absorb heat and smooth vapor.
Water-Free Smoothness — enjoy cooler hits without carrying a bubbler.
Pure Flavor — maintains the Proxy’s clean terp profile.
Portable & Lightweight — large performance, small footprint.
Easy Cleaning — drop into ISO alcohol, shake, rinse, and dry.
Borosilicate Glass — durable and built for daily use.
Performance Upgrade
Compared to the stock Proxy glass, the J-Hook offers a major jump in cooling and smoothness. The extended length, combined with the bead-filled chamber, greatly reduces harshness—especially at higher temperatures—while preserving the Proxy’s full flavor detail.
Cleaning & Maintenance
Cleaning is fast and effortless. Place the J-Hook in a sealable bag with isopropyl alcohol, shake for a few minutes, rinse with warm water, and allow it to air dry. The glass beads clean themselves inside the chamber, restoring the piece to a like-new shine.
Final Thoughts
For Proxy users who want cooler, smoother, water-free hits, the Puffco Proxy J-Hook is one of the best upgrades available. Its long 8-inch shape, bead-filled cooling system, and custom Proxy-specific fit deliver outstanding performance with no extra setup. It’s stylish, functional, and easy to maintain—an ideal accessory for elevating your dry-cooling experience.
Sneaky Pete Vaporizers — premium Puffco Proxy accessories, custom glass, and performance upgrades.
Crossing Heated Dab Tool (Hot Knife)
Load clean. Drop clean. No mess.
The Crossing Heated Dab Tool is the easy way to load sticky concentrates into your wax pen or e-rig without scraping the sides of the bowl. A ceramic hot-knife tip, three voltage levels, and simple one-button controls let you warm and release your dab with precision. It’s compact, USB-C rechargeable, and comes with a protective cap for pocket-safe carry.
Key Features
Heated ceramic tip for smooth, mess-free loading
3 voltages (Blue / Green / Red) to match different concentrate textures
Two heat modes: quick cycle (double-click) or manual hold
USB-C charging with included cable
Protective cover cap for safe storage
550 mAh battery for plenty of reloads between charges
One-button operation—fast to learn, easy to use
Why You’ll Like It
Less mess: Warm the tip and your dab slides cleanly into the chamber—no more hard scraping.
Better control: Choose a lower level for softer waxes or higher for firmer concentrates like shatter.
Pocket-friendly: Lightweight, capped, and ready to travel.
How to Use the Crossing Heated Dab Tool
Remove the glass/plastic cap.
Power on: Press the button 5× to turn on (repeat to turn off).
Select voltage: Press 3× to cycle Blue → Green → Red.
Heat the tip:
Quick cycle: Press 2× to start a short auto heat.
Manual: Press & hold to heat while you load.
Scoop your concentrate, hover over the chamber, then warm the tip—after a few seconds the dab will slide offcleanly.
Replace the cap when finished and power off.
Tip: Use Blue/low for most waxes; bump to Red/high for firmer textures.
Battery & Charging
The integrated 550 mAh battery delivers many reloads per charge. Top up with the included USB-C cable. As with any small device, actual run-time will vary by heat level and usage.
Easy Cleaning
While the tip is still warm (not red-hot), wipe it with a vape-safe cleaning wipe to remove residue. Keep the protective cap on during storage to extend tip life and prevent debris.
Specifications
Tip
Ceramic heated “hot-knife” style
Heat Levels
3 voltages (Blue / Green / Red)
Controls
1 button • 5× power • 3× level • 2× cycle • hold to heat
Battery
550 mAh (integrated)
Charging
USB-C
Cap
Included protective cover
Use Case
Loading wax pens & e-rig chambers
What’s in the Box
Crossing Heated Dab Tool (Hot Knife)
Protective tip cover
USB-C charging cable
Owner’s manual
FAQs
Which heat level should I use?
Start on Blue for softer waxes. If the dab doesn’t release cleanly, step up to Green or Red for firmer concentrates like shatter.
How do I keep the tip clean?
Wipe the tip while warm with a vape-safe cleaning wipe every few sessions. Avoid scraping with metal tools.
Will it work with my wax pen or e-rig?
Yes—this tool is brand-agnostic. It simply helps you transfer concentrates cleanly into most chambers.
Is there an auto shut-off?
The quick-cycle heat runs for a short, pre-set interval. Always power off when finished and replace the cap.
Safety Notes
The tip gets hot—keep away from skin, fabrics, and flammables.
Allow the tip to cool before capping or cleaning.
Charge with a quality USB-C cable and reputable power source.
Store capped, out of reach of children and pets.
Vector Mystique Single Flame Torch Lighter
The Vector Mystique pairs a sleek, vertical profile with one of the most comfortable ignition systems we’ve used. At 3.37" tall, 0.78" wide, and 0.94" deep, it’s slim, pocket-friendly, and built from metal for everyday durability.
Key Features
Side-Lever Ignition: Low-effort, natural thumb press to ignite and hold the flame
Ultra-Slim Vertical Design: Tall, narrow body for easy everyday carry
Large Flame Dial: Oversized adjuster at the base—turn with thumb and finger (no tool needed)
Metal Construction: Solid feel and long-lasting durability
Stylish Finishes: Metallic blue or gunmetal satin
The side-lever ignition is the star here: press the small metal lever that rests flush against the body to fire the torch, then keep it comfortably depressed as long as you need. Because you’re holding a lever—not pushing in or flicking sideways—it’s exceptionally easy on the thumb and a great choice for anyone with mobility or grip issues.
With its slim profile, simple operation, and large, easy-to-use flame adjustment, the Vector Mystique is an outstanding everyday carry torch lighter that blends comfort, style, and performance.
Vector Stratos Single Flame Torch Lighter
The Vector Stratos is a single flame torch lighter that stands out with its bold steampunk-inspired design and durable metal build. Compact at 2.87" tall, 1.30" wide, and 0.73" deep, it blends eye-catching style with practical performance.
Key Features
Steampunk Aesthetic: Unique industrial design with tactile controls
Protective Jet Cover: Prevents dust and debris from entering the flame jet
One-Press Ignition: Single button both opens the cover and ignites the flame
Metal Construction: Built to last with premium textured or glossy finishes
Adjustable Flame: Screwdriver-friendly control at the base
Unlike most lighters with exposed jets, the Stratos features a built-in protective cover that flips open as you ignite, keeping the torch clear and ready to use. The push-down ignition is highly tactile — one smooth press opens the cover and sparks the torch, making it feel as satisfying as it is functional.
Available in a textured matte black finish or a glossy sparkle burgundy reminiscent of a sports car, the Vector Stratosdelivers both style and substance for anyone who wants their everyday carry lighter to stand out.
Vector Summit Single Flame Torch Lighter
The Vector Summit combines the classic feel of a flint ignition with the power of a modern butane torch. Measuring 3.38" tall, 0.88" wide, and just 0.67" deep, this slim vertical design is perfect for everyday carry while still offering serious performance.
Key Features
Flint Ignition: Traditional spark-wheel design with modern torch flame
Slim Vertical Build: Compact, portable lighter with a narrow profile
Adjustable Flame Dial: Fingernail or screwdriver-friendly control at the base
Stylish Finishes: Available in gunmetal or bold red matte
Everyday Carry Ready: Lightweight and highly portable design
Instead of electronic ignition, the Vector Summit uses a classic flint-style spark wheel — just flick the wheel to spark, and the butane torch ignites with a clean, blue flame. This makes it a unique option for anyone who enjoys the tactile feel of a traditional lighter but wants the performance of a modern torch.
Sleek, stylish, and pocket-friendly, the Vector Summit is ideal for everyday carry or anyone who appreciates a lighter that blends classic design with modern function.
Vector Speed Single Flame Torch Lighter
The Vector Speed is a compact and powerful single flame torch lighter that delivers reliable performance with smart features in a stylish design. Measuring just 3" tall, 2.5" wide, and 0.75" deep, it’s easy to carry while offering the quality Vector is known for.
Key Features
Angled Flame: 45° flame output for more comfortable lighting
Flame Lock: Hands-free operation with simple thumb control
Fuel Gauge: Transparent window shows butane level at a glance
Large Adjustment Dial: Quickly fine-tune flame size from the base
Stylish Finishes: Available in vibrant colour fade or matte black
The intuitive thumb ignition makes the Vector Speed one of the easiest lighters to use. Just press down on the built-in safety, ignite with a push, and lock the flame on with an upward slide for continuous use. Whether you prefer the sleek matte finish or the eye-catching fade pattern, this lighter is designed to look sharp and work flawlessly.
Built for portability and performance, the Vector Speed Torch Lighter is an excellent choice for anyone seeking a reliable single flame torch that’s easy to use and maintain. With Vector’s reputation for quality, you can count on it for years to come.
Vector Ultra Slim Single Flame Torch Lighter
The Vector Ultra is a sleek, pocket-friendly torch lighter designed for everyday carry. Measuring just 2.4" tall, 1.36" wide, and only 0.45" deep, this ultra-slim design makes it one of the most compact single flame lighters available. Built from durable metal, it feels solid in the hand while staying light and easy to carry.
Key Features
Ultra-Slim Design: Just 0.45" deep for a discreet everyday carry
Angled Flame: 45° flame output for easier, more comfortable lighting
Simple Thumb Ignition: Push-to-the-side action with intuitive grip point
Durable Metal Build: Satin rose gold or metallic speckled blue finish
Adjustable Flame: Fine-tune with a coin or small screwdriver
Operating the Vector Ultra is simple and intuitive. Rest your thumb on the raised grip near the top, push to the side, and the angled flame ignites instantly. The compact flame adjuster at the bottom lets you dial in the flame size for your needs.
If you’re looking for a compact and stylish torch lighter that’s as slim as it is reliable, the Vector Ultra is a perfect choice. Sleek, discreet, and built to last, it’s ideal for anyone who values everyday carry performance without the bulk.
Puffco Pivot Glass Stems – Enhance Your Portable Concentrate Experience
Upgrade your Puffco Pivot with cooler, smoother, and more flavorful vapor using one of four premium glass stem options designed for enhanced performance.
Overview
The Puffco Pivot already delivers excellent concentrate performance with its stock silicone mouthpiece, but switching to a glass stem instantly elevates flavor, cooling, and overall smoothness. These four custom stems offer improved airflow, increased vapor path length, and specialty cooling features—all without compromising portability.
🔧 Simple Installation – Secure Fit
Each stem is designed to fit the Pivot perfectly. Just open the atomizer lid and slide the glass stem under the silicone lip. It locks into place the same way as the lid and stays secure until removed.
💨 Why Upgrade to Glass?
Glass provides cooler vapor, smoother airflow, and cleaner flavor. These stems extend the vapor path while adding features like bead-filled chambers, spike diffusers, and water filtration. The result is smoother, cooler, and more enjoyable hits—no bulk or extra attachments required.
🧪 Choose Your Cooling: 4 Stem Options
🚀 The Puffco Pivot Evolution Stem
Ideal for users who want maximum dry cooling in a compact form. This 2.5-inch stem is filled with multicolor glass beads that increase internal surface area, slowing vapor and pulling heat before it reaches your lips.
Length: 2.5 inches
Cooling Method: Multicolor glass bead fill
Best for: Maximum dry cooling
🌵 The Puffco Pivot Cactus Stem
At only 1.5 inches long, the Cactus Stem offers compact cooling with three pairs of internal spikes that break up vapor flow and reduce heat. Perfect for on-the-go use with minimal size increase.
Length: 1.5 inches
Cooling Method: Triple-spike vapor disruption
Best for: Discreet cooling with minimal bulk
💧 The Puffco Pivot BubbleStem
For the smoothest possible draw, the 3.5-inch BubbleStem features a small built-in water chamber that functions like a mini bubbler. Just a small amount of water dramatically reduces throat harshness and cools vapor effectively.
Height: 3.5 inches
Cooling Method: Built-in water chamber
Best for: Maximum cooling and smoothness
🔥 The Puffco Pivot 3D Bent Stem
The longest and coolest dry stem in the lineup. The 5.5-inch 3D Bent Stem is packed with full-length 3D cooling spikes that increase surface contact and strip heat from vapor as it travels. A top choice for users seeking dry cooling without sacrificing flavor.
Length: 5.5 inches
Cooling Method: Full-length 3D cooling spikes
Best for: Maximum dry cooling with superior flavor
📦 Features at a Glance
All stems fit securely under the Pivot lid system
No tools or adapters required
Improved cooling and smoother vapor
Made from durable borosilicate glass
100% compatible with all Puffco Pivot units
Final Thoughts
The Puffco Pivot is already one of the most capable portable concentrate vaporizers available, but adding a glass stem unlocks a major upgrade in flavor, cooling, and smoothness. Whether you want compact portability or full cooling performance, this lineup gives you the freedom to customize your Pivot exactly how you like it.
Choose the stem that fits your style and elevate your Pivot experience.
Sneaky Pete Vaporizers — Your source for premium Puffco accessories and performance glass.
Flaka Zylo Portable E-Rig: A Compact, Affordable Concentrate Vaporizer
Looking for an easy-to-use, budget-friendly way to enjoy concentrates? The Flaka Zylo Portable E-Rig is the perfect entry-level concentrate vaporizer for beginners while also being an excellent secondary device for experienced users who want something compact and efficient.
What Makes the Flaka Zylo a Great Choice?
1. Affordable & Beginner-Friendly
If you’re new to concentrates, the Zylo provides a hassle-free way to get started. It’s designed to be simple to use while still delivering a solid, reliable experience without the high cost of premium e-rigs.
2. Ultra-Portable & Compact
At a fraction of the size of larger e-rigs, the Zylo is small enough to take anywhere, making it an ideal on-the-go concentrate vaporizer. It’s lightweight, pocket-friendly, and easy to transport.
3. Great Performance for the Price
Despite its affordability, the Zylo still delivers smooth, flavourful vapour. It’s perfect for those who want a reliable daily driver without breaking the bank.
4. Easy-to-Use Operation
Simple button controls for a no-fuss experience
Preset temperature settings for quick adjustments
Fast heat-up time so you can start your session quickly
Who is the Flaka Zylo For?
Newcomers to concentrates looking for an affordable, user-friendly option
Experienced users wanting a budget-friendly backup or travel rig
Anyone who values portability in a compact concentrate vaporizer
Package Contents
1 x Flaka Zylo Portable Concentrate E-Rig
1 x Charging Cable
1 x User Manual
Final Thoughts
The Flaka Zylo Portable E-Rig is one of the best budget-friendly concentrate vaporizers available. Whether you're looking to explore concentrates for the first time or need a reliable, portable backup device, the Zylo delivers great performance without the high price tag.
Introducing the Vector Quattro Butane Torch
The Quattro Butane Torch by Vector is engineered to deliver massive power in a highly portable design. Combining strength and convenience, this torch is perfect for those who need a reliable, high-performance lighter, especially in outdoor environments.
Unmatched Power in a Compact Size
Don’t be fooled by its small form factor—the Quattro packs a serious punch with its four-flame design. The flames are tightly spaced to generate immense heat quickly, making this torch ideal for heating devices that need concentrated power. Its compact size, at W 0.92″ x L 1.06″ x H 3.5″, makes it easy to carry in any pocket or bag.
Built for the Outdoors
Thanks to its excellent wind resistance, the Vector Quattro excels in outdoor conditions. Whether you’re on a hike or at a beach, you can count on this torch to perform reliably.
Perfect Resting Place for Your Devices
A thoughtful design feature of the Quattro is the cigar rest located on top, which doubles as a resting spot for your DynaVap, Anvil, or event a joint in between hits. This multifunctional detail adds extra value for those who enjoy vaping and smoking, offering convenience without sacrificing style.
Powerful Flames and Easy Ignition
The Quattro’s four flames do not converge but are positioned close together, providing massive heat over a small area in a short time. To use, simply flip up the top and pull down on the trigger to ignite the torch. The torch is also equipped with a visual fuel gauge, so you can easily check your butane levels before heading out.
Sleek Design with Easy Adjustability
The Quattro not only performs well but looks great, too. Its stunning red finish feels comfortable in hand, combining both aesthetics and practicality. The torch also features a large flame adjustment dial on the bottom, making it easy to fine-tune the flame size.
Dimensions
- Width: 0.92″
- Length: 1.06″
- Height: 3.5″
The Quattro Butane Torch by Vector is the perfect blend of power, portability, and elegance, providing everything you need in a high-performance lighter. Whether you're outdoors or at home, this torch delivers reliable, concentrated heat in a sleek, easy-to-use package.
Introducing the Ironquad Butane Torch by Vector
The Ironquad by Vector is the epitome of class and power in a portable package. Designed for those who need a robust 4-flame torch with a wide flame pattern, this torch delivers high performance while maintaining a sleek, elegant look. Whether you're using it for cigars, vaporizers, or joints, the Ironquad is built to impress.
Large Fuel Reservoir with Easy Monitoring
Equipped with a healthy fuel reservoir, the Ironquad ensures you have plenty of butane to power its four flames. The fuel window located on the back of the torch allows you to easily keep track of fuel levels, so you can refill before running out. This is especially handy for a 4-flame torch, as it naturally uses more fuel than single-flame models.
Effortless Flame Adjustment
Adjusting the flame size and temperature is a breeze with the Ironquad. The large, easy-access dial at the bottom is designed for convenience, allowing you to modify the flame without any fiddly components. Although there is some flame variance, this torch is primarily built for power, making it a go-to choice for those who need serious heat output.
Innovative Cigar Rest for Versatility
One of the standout features of the Ironquad is its built-in cigar rest, which is not only perfect for cigars but also for resting your DynaVap, Anvil, or joint between hits. The large trench size ensures maximum safety, offering a stable resting spot for your devices while maintaining the torch’s elegant aesthetic.
Powerful 4-Flame Design for Maximum Heating
The Ironquad’s four flames create a wider flame pattern, ideal for full-device heating rather than focusing on a single point. This allows for more even and efficient heating across larger surfaces. You can also rotate the lighter 90° to achieve a different heating pattern, giving you more control over how your device heats. Perfect for outdoor use, this torch works well in windy conditions and compensates for colder air with its massive heat output.
Ergonomic and Easy to Use
Operating the Ironquad is simple and intuitive. Flip up the dust cover with your thumb, then pull down on the trigger button to ignite the four flames. The combination of its ergonomic design and solid build quality ensures a smooth, satisfying user experience every time.
Dimensions
- Width: 1.37″
- Length: 0.94″
- Height: 3.40″
The Ironquad is substantial yet remains portable and easy to carry, fitting comfortably in your pocket. Its classy, high-end feel, combined with its functional features like the cigar rest, makes it an excellent choice for anyone seeking a premium 4-flame torch with maximum versatility and performance.
Effortless Maintenance with Permanent Glass Screen
The Tinymight 2 Extended 3D Stem features a permanent glass screen, ensuring easy maintenance and hassle-free cleaning. This durable design makes it a reliable companion for your vaping sessions.
Ideal Bowl Capacity: The Goldilocks Setting
With its perfectly balanced bowl capacity, the Tinymight 2 Extended 3D Stem hits the sweet spot—not too big, not too small—making it ideal for users who want just the right amount of material for their sessions.
Comfortable Mouthpiece for Enhanced Experience
The stem comes with a comfortable mouthpiece, designed for a pleasant and ergonomic vaping experience, reducing strain and making your sessions more enjoyable.
Extended Length for Superior Cooling
Measuring about 6" in total length, the extended design of this stem provides added cooling by allowing more time for the vapour to cool down. The additional glass material also helps dissipate heat, ensuring a smoother draw.
Advanced Cooling with 3D Glass Nipples
The stem is further enhanced with 3D glass nipples—small indentations that force the vapour to weave through the stem rather than taking a straight path. This innovative design cools the vapour more effectively.
Comfortable and Convenient Vaping
Thanks to its extended length, the Tinymight 2 Extended 3D Stem offers a more comfortable vaping experience, allowing you to hold your device at a more relaxed distance from your face.
Cool Down Your VENTY with the VENTY Bead Stem
Many of our favourite devices come equipped by default with a relatively short output that does very little to substantially impact the cooling of the vapour that’s created, resulting in unwanted coughs and unnecessary sore throats. Ideally, you’re going to want to run your rig through water for the best cooling, but if you’re out and about, that’s rarely an option. The VENTY Bead Stem is an incredibly effective cooling stem that will work with several of the most popular and powerful devices available. Let’s dig into what makes the VENTY Bead Stem so great.
Familiar Technology Executes Impressively for Better Cooling
By now, most of us are familiar with ball vapes, but for those who aren’t, essentially your flower is vaporized by a wand that’s head is full of quartz balls heated by an electric coil. With the VENTY Bead Stem, we went in the exact opposite direction; the quartz beads in the stem act to pull heat from your vapour to provide a more enjoyable session. These balls are on the larger side and are effective at drawing a tonne of heat out of your vapour while providing less airflow restriction than the smaller balls you’ll find in other stems.
A Lateral Evolution of the Rocket Stem
Speaking of the Rocket Stem, the Bead Stem has a thinner profile making it easier to take on the go. You can also remove the beads in the Bead Stem, making it even easier to clean than the Rocket Stem. The Bead Stem has a two-piece glass section, one section that holds the quartz balls in place and the second part that connects to the stem through a gasket connection. This choice for a two-piece construction allows for the easiest maintenance and maximum airflow possible.
Effective, Compacted and Ready to Take with You
Like our popular Rocket Stems, the VENTY Bead Stem attaches to your device with a silicone connector. The VENTY Bead Stem is a highly efficient, compact stem that will definitely outperform the standard cooling unit that your device was shipped with.
The Sneaky Pete Globe™ is a classic water pipe that fits the perfect volume of water for premium vapour cooling and hydration. This was our first custom piece, designed to provide functional, high-quality, and affordable glass for everyone.
Built by a high-end manufacturer to our specifications, the Globe features versatile 14mm female joints that works natively with all of our adapters and a huge variety of others. It will work with concentrate or dry herb vaporizers, bangers, or traditional bowls.
The glass stem mouthpiece, which is also included, provides a great alternative way to use it.
Premium XL Bowl Upgrade
Introducing the 18mm Female XL Glass Injector Bowl, a premium upgrade from the standard option.
Maximized Compatibility
Featuring an unfrosted 18mm female input joint, this injector bowl ensures your vaporizer slides in and out with ease. It's designed to fit a wide range of popular devices, ending in the widely used 14mm male joint size.
Enhanced XL Capacity For Heavy Hitters
This XL version offers a significantly larger bowl capacity compared to the original model. With double the size of the regular bowl, it's ideal for those who want bigger hits. You can pack a substantial amount of flower for massive hits or use a smaller amount for regular function.
Robust Metal Screen
The rigid metal screen stays securely in place, even during stirring. The fluted bowl design allows the screen to fit snugly, providing a durable solution when handled with care. Replacement screens are also available if you need a fresh one.
Easy To Handle
The 18mm Female XL Glass Injector Bowl comes with a sturdy glass arm on the side, making it easy to move and handle, even when hot.
Combustion Enthusiast's Dream
Unlike most of our pipes, The Sparrow Pipe is crafted specifically for those who savour the traditional art of combustion. It's a perfect blend of elegance and functionality, designed to elevate your smoking experience.
Also Available in 14mm
The Sparrow also comes in a 14mm version, perfect for use with your favourite vaporizer.
Sturdy and Stylish Design
Standing at a total height of 5.5”, The Sparrow Pipe is both compact and stylish. Its 3” flat bottom ensures stability on any surface, so you can enjoy your session without any wobbling.
Generous Bowl Capacity
The Sparrow Pipe features a generously sized bowl, allowing you to pack a significant amount of flower per load. However, you're in control – you don’t have to fill it entirely every time. The built-in bowl design means you don't have to worry about breaking or losing a separate bowl.
Innovative Ash Control
The bowl's smaller neck helps keep ash out of the pipe's body, maintaining a cleaner smoking experience. This feature, combined with the mini stereo matrix percolator, enhances airflow and bubbling for a smoother draw.
Elegant Mouthpiece
The built-in mouthpiece is both practical and elegant, fitting comfortably in your mouth with a lip guard to ensure perfect positioning. At 3.5” long, it keeps your face away from the flame while lighting.
Make The Sparrow Sing
Make The Sparrow Pipe sing with your favourite flower. We particularly enjoy it with cannabis. The Sparrow Pipe is more than just a smoking accessory; it's a statement piece for those who appreciate quality and design.
---
Key Features:
- Height: 5.5”
- Stable Base: 3” flat bottom
- Generous Bowl: Large enough for significant flower packing
- Built-in Bowl: No separate pieces to break
- Ash Control: Smaller neck to prevent ash build-up
- Percolator: Mini stereo matrix for enhanced airflow and bubbling
- Mouthpiece: 3.5” long with lip guard for comfort and safety
Experience the superior design and performance of The Sparrow Pipe, where tradition meets innovation in every puff.
