BY Sneaky Pete Store

Sneaky Pete Half-Bowl Converter™

BY Sneaky Pete Store
39 reviews
Watch Video

   Sneaky Pete says:

What if I told you that you could increase the amount of time that your flower lasts with one small addition to your DynaVap tip? The Sneaky Pete Half-Bowl Converter is useful to any DynaVap owner who wants to increase the efficiency of their device.   

Designed by Sneaky Pete and manufactured by DynaVap, you’re receiving an adapter produced with the high level of precision and quality DynaVap is known for. The pure titanium Half-Bowl Converter turns any DynaVap tip with an adjust-a-bowl into the perfect half-bowl setup.  

While the stock adjust-a-bowls are great, getting your CCD perfectly placed and locked into the half-bowl setting can be time consuming and difficult. You also need a pristine CCD to have the best chance of adjusting your bowl. The Converter quashes all these issues. Just pop in the Half-Bowl Converter and your CCD will easily snap into place. It takes seconds and there is no chance of it coming out until you want it to. Although the Converter fits snug, it's super easy to remove it for cleaning or if you want to switch back to a full bowl setup.  

The half-bowl position provides better flavor and efficiency as you’ll more thoroughly consume your material. On top of that, you’ll be rotating your material in and out more often, resulting in more green/fresh hits. The Half-Bowl Converter also adds thermal mass to the DynaVap tip which can produce a more complete extraction from a single hit. During in-house tests, we were seeing the biggest DynaVap hits that we’d ever produced. A nice side-effect, for sure. 

The Sneaky Pete Half-Bowl Converter works with induction heaters or a torch and is a super inexpensive accessory that will pay for itself quickly. Get more bang for your buck and enjoy your flower longer with the Half-Bowl Converter.

Each Half-Bowl Converter includes a titanium CCD, and comes in a single or a two-pack.

$24.97 USD
Best price guaranteed
$24.97 USD
Best price guaranteed

Free shipping for orders over $60 within the USA.
Fast, low-cost and discrete shipping.

Assurance Images
Assurance Images
39 reviews

   Sneaky Pete says:

What if I told you that you could increase the amount of time that your flower lasts with one small addition to your DynaVap tip? The Sneaky Pete Half-Bowl Converter is useful to any DynaVap owner who wants to increase the efficiency of their device.   

Designed by Sneaky Pete and manufactured by DynaVap, you’re receiving an adapter produced with the high level of precision and quality DynaVap is known for. The pure titanium Half-Bowl Converter turns any DynaVap tip with an adjust-a-bowl into the perfect half-bowl setup.  

While the stock adjust-a-bowls are great, getting your CCD perfectly placed and locked into the half-bowl setting can be time consuming and difficult. You also need a pristine CCD to have the best chance of adjusting your bowl. The Converter quashes all these issues. Just pop in the Half-Bowl Converter and your CCD will easily snap into place. It takes seconds and there is no chance of it coming out until you want it to. Although the Converter fits snug, it's super easy to remove it for cleaning or if you want to switch back to a full bowl setup.  

The half-bowl position provides better flavor and efficiency as you’ll more thoroughly consume your material. On top of that, you’ll be rotating your material in and out more often, resulting in more green/fresh hits. The Half-Bowl Converter also adds thermal mass to the DynaVap tip which can produce a more complete extraction from a single hit. During in-house tests, we were seeing the biggest DynaVap hits that we’d ever produced. A nice side-effect, for sure. 

The Sneaky Pete Half-Bowl Converter works with induction heaters or a torch and is a super inexpensive accessory that will pay for itself quickly. Get more bang for your buck and enjoy your flower longer with the Half-Bowl Converter.

Each Half-Bowl Converter includes a titanium CCD, and comes in a single or a two-pack.

Sneaky Pete Half-Bowl Converter™ Review & User Guide

Sneaky Pete Half-Bowl Converter™ Review & User Guide

BENEFITS OF THE HALF-BOWL POSITION

Conserve flower, maximize flavor

I prefer the half-bowl position because it offers two main benefits, the most obvious one is that you’re using half the amount of flower in each bowl. Consider the already small amount that would normally go into a full-sized DynaVap bowl and cut that in half, by doing so you’re going to start conserving a tonne of flower. The other benefit is that you’ll get way more fresh hits because you’re switching out your load and getting the tasty flavor of fresh flower twice as often. I also find that I get better effects from a fresh bowl.

module image

WHY I CREATED THE HALF-BOWL CONVERTER

I'm tired of fiddling around with flimsy CCDs

module image

DynaVap have been improving the operation of Adjust-A-Bowl on recent models, but if you’re like me, you still often struggle to get the CCD into the half-bowl position. If you don’t have a brand new pristine CCD it’s virtually impossible to get it to lock properly into that position. CCDs aren’t the toughest things around, bending them out of shape and usefulness happens far more often than I would prefer. So I sat down to think about this problem, what would be the best way to go about solving this little conundrum? Then a light bulb came on and this little idea emerged from the vaporous thoughts swirling in my mind, so simple but so effective - the Sneaky Pete Half-Bowl Converter.

WHAT IS THE HALF-BOWL CONVERTER?

A sturdy base for the CCD to sit on in half-bowl position

module image

As you can see, the Half-Bowl Converter is a tiny piece of gear, but it’s going to have a huge impact on how you’re able to use your DynaVap. It’s a precision machined piece of titanium, I had DynaVap themselves handle the production, so it's sized to perfectly fit in a DynaVap tip, sitting exactly below the level where the CCD needs to be to achieve the half-bowl position. It provides a sturdy base for the CCD to sit on, preventing you from pushing it past the half-bowl position, while maintaining all the normal function of your DynaVap. Fiddling around while trying to gently ease the CCD into position is now a thing of the past.

You can use the Half-Bowl Converter in any DynaVap which has the Adjust-A-Bowl feature, so that’s any titanium tip (like on the Vong, for example), the 2020 M, and the 2021 M. It also works with a titanium or stainless steel CCD. The Half-Bowl Converter will not negatively affect the function of your DynaVap in any way, and you can still use it with a butane torch or an induction heater like usual.

HOW TO USE THE HALF-BOWL CONVERTER

Just drop it in

module image

It couldn’t be easier to use, with the CCD removed from your DynaVap tip, drop the Half-Bowl Converter inside, with the flat side of the Converter facing downwards into the bowl. It’ll rest there, held in only by gravity for now, so removing it is as simple as tipping the DynaVap upside-down. Then you just need to put the CCD into the tip and push it down with a small tool or the condenser, until it rests in place on top of the Half-Bowl Converter. That’s it, it’s locked in place, it won’t fall out no matter how hard you shake it, a rock-solid solution to a half-bowl conversion that is only going to come out when you want it to.

Removing the Half-Bowl Converter is also super easy, it’s sized so that a DynaVap condenser fits perfectly through the middle, just put the condenser into the bottom of the DynaVap tip, and through the Half-Bowl Converter to push the CCD out. The Half-Bowl Converter may get a little stuck in there if it’s a bit dirty and there’s build-up, but some isopropyl alcohol will quickly remove the build-up and set the Converter free. Personally I just leave it in there permanently, throwing the whole tip, Converter, and CCD assembly into iso alcohol when it needs a clean.

BENEFITS OF THE HALF-BOWL CONVERTER

Thicker hits and less bent CCDs

The Half-Bowl Converter has two unique benefits - one is that you’re going to go through far less CCDs and save money on replacements. The Converter provides a solid foundation that maintains the integrity of your CCD, meaning you don’t need to replace them anywhere near as often. Even if you have a CCD that has been bent out of shape a little you can just straighten it as best you can with your fingers, it doesn’t have to be perfect, then push it down into the DynaVap tip and onto the Half-Bowl Converter with a condenser to flatten it further and lock it into place.

The second benefit, and the most interesting one in my mind, is that the added titanium of the Half-Bowl Converter increases the thermal mass in the DynaVap tip, directly below the flower. Heating the tip at the bottom of the cap, which is where I usually heat mine, is going to delay the click by a couple of seconds, meaning that you’re going to get a hotter oven and a thicker hit. If you don’t want a thicker hit just apply the heat closer to the top of the cap like normal and it’ll mitigate any extra heat you can get from the Converter. Since I’ve had these in stock I have not set up a single DynaVap tip without using one, and I much prefer making use of that extra thermal mass because of what it does to my hits, I just love that extra thickness.

module image

Sneaky Pete Half-Bowl Converter™

$24.97 USD
Best price guaranteed

Free shipping for orders over $60 within the USA.
Fast, low-cost and discrete shipping.

Assurance Images
Assurance Images
Customer Reviews
4.9 Based on 39 Reviews
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • Dynavap
  • hits
  • screen
  • pack
  • bowl
  • clouds
  • flower
  • extraction
  • performance
  • Pete
A
09/14/2021
Anonymous
United States United States
Awesome for half bowl users!

For an overpriced tiny piece of metal (sorry Pete), I love these things! Have one for each of my Dynas. Love the half bowl setting in general and these seem to improve heating and extraction (not sure why or how — some kind of voodoo). Not for everyone for sure, but if you already know you like the half bowl setting then would highly recommend.

S
09/11/2021
scoob
United States United States
Perfect / must have accessory for dynavap

Every one of my dynavap tips has one of these in it.. well except for one that is my full packet. Trust me when I say the half pack is the was to go and this makes us so easy. I was so sick of fooling around with screens and using 2 diff size nail heads to sandwich the screen and try and get those darn screens in right place only to have my product pushed through and stuck in my clean bb9. ****. The screen will click on perfect using this and you can tight pack it, if that’s your thing.

DM
09/03/2021
Daniel M.
United States United States
Must have accessory

Was having issues getting the right pack and the proper full extraction…once I purchased the half bowl converter I can honestly say Ive become a daily vapcap user and love using it … will buy a few more and wont use my tips without it ! The taste and hits are so fresh, way easier to clean and thicker clouds … truly love it !

JF
08/29/2021
Jerry F.
United States United States
Sneaky Pete Half-Bowl Converter

What I initially thought might be a frivolous and needless expense turned out to be a useful and reliable little device well worth the expense. I ordered two more.

A
08/04/2021
Anonymous
United States United States
Huge Help in Maintaining Tolerance

I have CHS and shouldn't be smoking too much. I used vape 5 caps on the regular. This will help immensely on cutting back.

JM
07/30/2021
Joseph M.
United States United States
It does exactly what it's advertised to do.

Easy to use, easy to install, no issues with durability or sizing.

A
07/30/2021
Anonymous
United States United States
Work great

Only use half bowls so this works out great for not shifting the screen during debowling.

A
07/27/2021
Anonymous
United States United States
Dyna beast mode

These work nicely, pick some up.

A
07/22/2021
Anonymous
United States United States
Genius tool from Sneaky Pete

Bout damn time. Get the two pack now. I never dynavap without one. Don’t think about it. Do it!

A
07/07/2021
Anonymous
United States United States
Great for micrososing

Great, saves a lot on bud. Hard to get the amount dialed in correctly, but once u do it’s a dream

A
07/07/2021
Anonymous
United States United States
Finally a Solution

My apologies for the late review and that you had to send a couple of requests Anticipating time on the road I had the package sent to my July 4th spot so I had to chase it and not the other way around. Now a few days later I have begun the ‘test’. So the night before I watched Pete and George on Teatime launching this product, I had of course for the umpteenth time while stirring pushed the CCD down from it’s 1/2 way groove to the bottom of the tip. I had never been pleased with that result. Well as soon as the teatime discussion turned to Pete’s idea I was sold. I have put one in my OG Omni XL and the other in a 2020 M. Testing the Omni right now. I love that I can push a nug down, break it up as I vape with a tool and even give it a stir and the CCD doesn’t budge. It might even be helping to intensify the vapor. I am not apposed to testing for that though. Anyway finally a solution to my woes and in my world that is value. Aka Bernie

RS
07/07/2021
Ricardo S.
United States United States
Sneaky Pete Half-Bowl Converter

Great idea but have to learn how to heat.

JY
07/06/2021
Justin Y.
United States United States
Perfect Solution!

Works great! If you like the half bowl size and clean your dynavap often this thing makes it a lot easier to get the ccd back in place.

RS
07/06/2021
Robert S.
United States United States
Gamechanger

Simple design yet profound improvements. If you are a heavy hitter you can clear your dynavap in one hit with these things. A little pricey but will pay for itself in no time. Massive clouds + money saved = no brainer! Great job Sneaky Pete you knocked it out of the park here with the half bowl converter.

SH
07/06/2021
Steve H.
United States United States
Awesome!

This is really a cleaver idea, much more efficient!

A
07/06/2021
Anonymous
United States United States
Game Changer!!!

IT. WAS. AMAZING. While I use less amount of flower, the effect is even more powerful than when I used the whole bowl.

A
07/05/2021
Anonymous
United States United States
Works as advertised, love it

It works exactly as shown. I prefer it

A
07/05/2021
Anonymous
United States United States
Best accessory to date.

The half bowl converter merges need and want if that makes sense. The issue with putting the screen at the halfway point of the bowl no longer exists. And the hits are super thick and flavorful. Perfect tool.

JN
07/02/2021
Joseph N.
United States United States
Cool product

Actually I have not used it yet. I just bought it to support the company. The whole buying experience has been great though. Thanks Tom from support.

JJ
06/25/2021
Jon J.
United States United States
It is what is what it is...

It adds a bit of Mass which is Great to add flavor and save Flower...

Sneaky Pete Half-Bowl Converter™

$24.97 USD
Best price guaranteed

Free shipping for orders over $60 within the USA.
Fast, low-cost and discrete shipping.

Sneaky Discreet Shipping
Glass Protect Badge