Products

The Crafty+/Mighty+/DynaVap 14mm Whip Adapter 14mm Whip Adapter is the perfect way to add some length to your air-path and cool your hits through a water pipe while using these top-notch dry herb vaporizers. This super direct and straightforward way to lower your vapour temperature attaches directly to the stock mouthpiece of your Crafty or Mighty; there is no need to remove the cooling unit. When using the Whip Adapter, you can keep your vape upright, there is no need to invert it, just hold it in your hand, sit it on a table, or whatever you prefer. Measuring just under 35cm long, the business end of the Whip ends in a 14mm male joint for maximum compatibility. The end which attaches to the mouthpiece of your vaporizer has a nice tight fit for a perfect seal. A great option for any owner of a Crafty, Crafty+, Mighty, or Mighty+, add the 14mm Whip Adapter for an easy, viable cooling option. This adapter will also work with any standard DynaVap body to add a 14mm male whip adapter to your favorite VapCap!

Read more less

Crossing Heated Dab Tool (Hot Knife) Load clean. Drop clean. No mess. The Crossing Heated Dab Tool is the easy way to load sticky concentrates into your wax pen or e-rig without scraping the sides of the bowl. A ceramic hot-knife tip, three voltage levels, and simple one-button controls let you warm and release your dab with precision. It’s compact, USB-C rechargeable, and comes with a protective cap for pocket-safe carry. Key Features Heated ceramic tip for smooth, mess-free loading 3 voltages (Blue / Green / Red) to match different concentrate textures Two heat modes: quick cycle (double-click) or manual hold USB-C charging with included cable Protective cover cap for safe storage 550 mAh battery for plenty of reloads between charges One-button operation—fast to learn, easy to use Why You’ll Like It Less mess: Warm the tip and your dab slides cleanly into the chamber—no more hard scraping. Better control: Choose a lower level for softer waxes or higher for firmer concentrates like shatter. Pocket-friendly: Lightweight, capped, and ready to travel. How to Use the Crossing Heated Dab Tool Remove the glass/plastic cap. Power on: Press the button 5× to turn on (repeat to turn off). Select voltage: Press 3× to cycle Blue → Green → Red. Heat the tip: Quick cycle: Press 2× to start a short auto heat. Manual: Press & hold to heat while you load. Scoop your concentrate, hover over the chamber, then warm the tip—after a few seconds the dab will slide offcleanly. Replace the cap when finished and power off. Tip: Use Blue/low for most waxes; bump to Red/high for firmer textures. Battery & Charging The integrated 550 mAh battery delivers many reloads per charge. Top up with the included USB-C cable. As with any small device, actual run-time will vary by heat level and usage. Easy Cleaning While the tip is still warm (not red-hot), wipe it with a vape-safe cleaning wipe to remove residue. Keep the protective cap on during storage to extend tip life and prevent debris. Specifications Tip Ceramic heated “hot-knife” style Heat Levels 3 voltages (Blue / Green / Red) Controls 1 button • 5× power • 3× level • 2× cycle • hold to heat Battery 550 mAh (integrated) Charging USB-C Cap Included protective cover Use Case Loading wax pens & e-rig chambers What’s in the Box Crossing Heated Dab Tool (Hot Knife) Protective tip cover USB-C charging cable Owner’s manual FAQs Which heat level should I use? Start on Blue for softer waxes. If the dab doesn’t release cleanly, step up to Green or Red for firmer concentrates like shatter. How do I keep the tip clean? Wipe the tip while warm with a vape-safe cleaning wipe every few sessions. Avoid scraping with metal tools. Will it work with my wax pen or e-rig? Yes—this tool is brand-agnostic. It simply helps you transfer concentrates cleanly into most chambers. Is there an auto shut-off? The quick-cycle heat runs for a short, pre-set interval. Always power off when finished and replace the cap. Safety Notes The tip gets hot—keep away from skin, fabrics, and flammables. Allow the tip to cool before capping or cleaning. Charge with a quality USB-C cable and reputable power source. Store capped, out of reach of children and pets.

Read more less

Perfect Fit for Your DC Cobra Enail The DC 25mm Quartz Banger is designed to be the ideal match for your DC Cobra Enail system. With a 25mm diameter, it seamlessly fits into the system’s coil, ensuring a smooth and consistent experience every time. Versatile for Traditional Use For those who appreciate the classic approach, this banger is perfect. It works effortlessly with a traditional torch or any other 25mm enail system, offering versatility without compromising quality. Built to Last Crafted from high-quality quartz, this banger is made to withstand years of use. Its durable construction ensures longevity, making it a reliable addition to your concentrate setup. Features: Beveled Edge: Provides a snug seal for enhanced performance. 2.5mm Thick Wall: Offers durability and heat retention. 4mm Thick Bottom Puck: Ensures even heat distribution. Deep Bucket: Accommodates larger dabs with ease. Frosted Joints: For a secure and stylish connection. Low Profile Neck: Designed for a sleek and ergonomic experience. 14mm Male Connection: Works with 14mm female water pieces.

Read more less

Mega Cube Replacement Downstem — Restore Dual-Input Performance Break it, replace it, or upgrade — the easiest way to keep your Mega Cube performing like new. This Mega Cube Replacement Downstem is the perfect solution for restoring your setup after an accident or simply keeping a spare on hand. Downstems are one of the most commonly damaged components during cleaning, and this low-cost replacement gets your Mega Cube back to peak performance in seconds. Beyond replacement, this downstem also unlocks one of the Mega Cube’s most unique capabilities — true dual-input functionality. With both 14mm and 10mm compatibility, you can run two devices into a single water piece at the same time, making it ideal for heavy hitters, shared sessions, or anyone who enjoys experimenting with creative setups. Features Direct replacement: Designed specifically for the Mega Cube water piece. Dual-input capability: Supports simultaneous 14mm and 10mm use. Perfect spare part: Ideal backup for accidental breaks during cleaning. Affordable upgrade: Restore your setup without replacing the entire piece. Why Keep a Spare? Glass accidents happen — usually during cleaning. Keeping a replacement downstem nearby means you’re never sidelined, and you can continue enjoying the full Mega Cube experience without interruption. Sneaky Pete Vaporizers — Performance accessories and replacement parts designed to keep your gear running at its best.

Read more less

Dr. Dabber Drop – The Heated Loading Tool Reimagined The Dr. Dabber Drop is the long-awaited evolution of the original heated loading tool—the iconic Budder Cutter, first released in 2014. Redesigned from the ground up, this next-generation tool makes loading sticky, hard-to-manage waxes and oils into your eRig, banger, or pen faster, cleaner, and more efficient than ever. The Successor to a Game-Changer This is more than just an update. The Dr. Dabber Drop is a complete reimagining of one of the most innovative concentrate tools ever created. With a sleeker design, better performance, and enhanced versatility, it delivers everything you loved about the original—plus a whole lot more. Multi-Use Compatibility Whether you’re using an electric dab rig, a traditional setup, or a vape pen, the Dr. Dabber Drop fits seamlessly into your routine. It’s the ideal solution for anyone tired of messy loading or wasting concentrates on sticky tools that just don’t work. Calibrated Heating That Won’t Waste Your Concentrates The Drop features a carefully calibrated heating element that delivers just the right amount of heat—enough to handle sticky extracts, but not enough to burn or vaporize your valuable concentrates. It heats up quickly and maintains a stable temperature throughout use. Two Heat Settings for Total Control With dual heat settings, the Dr. Dabber Drop gives you the flexibility to handle any concentrate type with confidence. Toggle between heat levels depending on the thickness or consistency of your wax or oil. Designed for Everyday Convenience It’s not just functional—it’s smart. The Dr. Dabber Drop features a magnetic cap that attaches to the back of the unit while in use, so you never lose it. And with USB-C charging (cable included), it’s always ready when you are. Features At a Glance Next-gen heated loading tool for concentrates Successor to the original Budder Cutter (2014) Works with eRigs, bangers, and vape pens Prevents waste—doesn’t burn or vaporize concentrates Dual heat settings for different concentrate types Magnetic cap and USB-C charging included

Read more less

Dr. Dabber Switch 2: The Ultimate High-Performance E-Rig for Concentrates For those who prioritize pure dab quality above all else, the Dr. Dabber Switch 2 is a best-in-class concentrate vaporizer that delivers unmatched flavour, precision heating, and efficiency. Built with advanced induction technology, it offers a customizable experience designed to extract the best from your concentrates. Why the Dr. Dabber Switch 2 Stands Out 1. Patented IR Sensor Technology for Unmatched Precision Exclusive to the Switch 2, IR sensor technology ensures unparalleled temperature control, making it the first e-rig ever with an integrated IR sensor. This advanced system delivers precision heating that adapts in real time to maintain optimal performance. 2. Omni-Directional Induction Heating for Even Extraction Unlike traditional coil-based heating systems, the Switch 2 uses advanced induction heating, providing true omnidirectional heating. This ensures the insert heats evenly from the sidewalls and base simultaneously, creating a balanced, efficient vaporization process. 3. No More Failing Atomizers Included with the Switch 2 is a 20mm Quartz Insert, a 300% increase in volume from the original Dr. Dabber Switch capacity. This expanded chamber allows for dabs of all sizes, offering a consistent, long-lasting experience without the risk of failing atomizers. 4. Dynamic Heating Modes: A True Game-Changer By refining the heating curves, the Switch 2 introduces three advanced profiles to enhance your session: Descent Mode: The default setting, which replicates traditional torch dabbing by reducing temperature 1°F per second during your hit. This preserves terpenes and eliminates the burnt taste. Ascent Mode: Perfect for cold starts and terpene chasing, gradually increasing temperature for a smooth low-temp experience. Steady Mode: Maintains a stable temperature throughout your hit, dynamically adjusting based on dab size and inhalation rate. 5. App-Enabled Customization Take control with the Dr. Dabber App, allowing you to: Customize temperature profiles Adjust hold times and session lengths Modify light modes for a personalized experience Specifications Material Compatibility: Concentrates Temperature Range: 250-650°F Heat-Up Time: 5-30 seconds (depending on setting) Battery Life: Up to 50 heating cycles per charge Charging Time: 60-90 minutes for a full charge Charging Type: USB-C pass-through charging Warranty: 2-year warranty on battery, charger, and electrical components Dimensions: Height 9" | Width 4" | Weight 25.6 oz What's in the Box? Dr. Dabber Switch 2 Device Switch 2 Quartz Insert Switch 2 Carb Cap Switch 2 Glass Attachment Dr. Dabber Drop™ Heated Loading Tool 36W Charger 1M USB-C Charging Cable Who is the Switch 2 For? Concentrate enthusiasts looking for the best dab experience available. Users who want full temperature control for optimal extraction. Those who prefer induction heating over traditional coil-based setups. Anyone looking for a high-end, long-lasting e-rig with premium performance. Final Thoughts The Dr. Dabber Switch 2 is engineered for those who demand the absolute best dab quality. With fast heat-up times, patented IR sensor technology, dynamic heating modes, and advanced induction heating, it delivers flawless, high-performance sessions every time. Whether you're a seasoned concentrate user or upgrading to a top-tier device, the Switch 2 is built to exceed expectations. Read our blog for a full review of the Dr. Dabber Switch 2.

Read more less

Keep Your Water Pipe Clean Dry Herb Catchers are the must-have accessory that you never knew you needed. When using a water piece, as you inhale through a vaporizer, small bits of flower will inevitably pass through the adapter and enter into your water piece, which can make a mess. A Dry Herb Catcher sits on the intake joint of your water piece, and acts as first stage filtration to prevent the majority of that flower from entering into your water piece, keeping it way cleaner for much longer. As they are made from glass and hold no water themselves, they will not reduce the flavour or strength of that delicious vapour. A Dry Herb Catcher can come in different shapes and styles, all having their own unique advantages. You can select from the Barrel, High Airflow, or the Mr. Twister version of Dry Herb Catcher, depending on your preferences.  All of our Dry Herb Catchers feature a 14mm female input joint and a 14mm male output joint. Read our full in-depth review of 25 Hits With A Dry Herb Catcher here.

Read more less

This stainless steel herb funnel makes filling your favorite vaporizer simple and tidy. Place the funnel into the top of the chamber and gently pour your herb in. It helps to eliminate the mess and inconvenience that can take place when pouring directly from the grinder into a vaporizer. Works best with finely ground materials, but will also work with a more coarse blend.

Read more less

DynaVap B Tip Works With All Stems Introducing the DynaVap B Tip – the perfect accessory for any DynaVap user! Like all of DynaVap's tips, this stainless steel tip is designed to work with any DynaVap stem on the market to maximize its compatibility. Permanent Half-Bowl Size Is More Efficient One unique aspect of the DynaVap B Tip is that rather than an Adjust-A-Bowl, this Tip rather has a permanent half-bowl size. Utilizing the half-bowl offers you an efficient way of consuming less flower but with more intense effects and flavour. A single fin design allows the material to heat up quickly so you can make use of all of your active ingredient in a hurry. Fresh Bowls Taste Better & Are Stronger Want stronger effects from your session? Change out your bowl more often and experience intense flavour and fresh effects with every single bowl. In addition to its great features, this accessory is also very affordable and a no-brainer for all DynaVap users. Get your DynaVap B Tip today and start saving even more flower with the incredibly efficient addition!

Read more less

The DynaVap B2 takes the original B concept and turns it up a notch — a larger 0.075 g bowl, an ultra-durable silicone stem, and the new DynaTorch lighter, all in one ready-to-go kit. Sorry, your browser doesn’t support embedded videos. Watch the DynaVap B2 in action — bigger bowl, better flavor, and built to travel. Overview The DynaVap B2 keeps the simplicity of the B but adds more power and polish. The 0.075 g bowl, stainless-steel airpath, and heat-resistant silicone stem create smooth, flavorful draws with minimal upkeep. The kit also ships with the new DynaTorch lighter and a protective tin case — everything you need to start fresh. Ships from the USA 🇺🇸 with fast, tracked delivery and American support from SneakyPeteStore.com. Key Features 0.075 g bowl: roughly 50% larger than the original B for richer sessions. Silicone stem: O-ring-free, anti-roll, and built to handle daily use. Stainless-steel airpath for clean taste and long-term durability. 10 mm water-pipe fit for cooler and smoother vapor. DynaTorch included — custom butane lighter inspired by the DynaVap cap. Protective tin case keeps your B2 and DynaTorch together on the go. Induction-heater compatible for hands-free heating options. Tip-swappable with other DynaVap tips for custom sessions. What’s Included 1 × DynaVap B2 device (silicone stem + stainless-steel tip & condenser) 1 × DynaTorch butane lighter 1 × Protective tin case (cap-inspired design) Performance & Design Portable and built to last, the DynaVap B2 offers precision manual heating with zero electronics. The soft-touch silicone stem stays cool while the steel airpath preserves purity of flavor. Pair it with a torch or induction heater for consistent results every time. B vs B2 — At a Glance Bowl Size: 0.075 g (~50% larger than the B) Tip Design: Refined geometry for better heat distribution Stem: Anti-roll silicone design with O-ring-free connection Lighter: DynaTorch included in every kit Case: Protective tin included for travel Specifications Bowl Capacity: 0.075 g (fixed) Stem Material: Silicone (O-ring-free design) Airpath: Stainless Steel Water-Piece Fit: 10 mm connection Heating Method: Butane torch (included) or induction heater Case: Cap-style protective tin Who It’s For The DynaVap B2 is ideal for anyone who wants a low-maintenance manual vaporizer that’s built to travel. It’s an affordable way to enter the DynaVap ecosystem without compromising flavor or build quality. Frequently Asked Questions What’s different about the B2? The B2 adds a larger bowl, refined tip, and silicone stem with anti-roll geometry plus the DynaTorch and protective case included in the box. Is the B2 induction-heater compatible? Yes — its stainless-steel tip and cap work with nearly all standard DynaVap-style induction heaters. Is the CCD adjustable? No — the 0.075 g bowl is fixed for easy, repeatable loads. Can I swap tips? Yes — most DynaVap tips fit securely on the B2 stem. Will it fit a water pipe? Yes — the 10 mm connection makes it ready for compact water cooling. Read our full in-depth review of DynaVap B2 Review (2025): Bigger Bowl, Silicone Stem & DynaTorch Included here.

Read more less

Upgrade Your DynaVap: The BallR Cap for Enhanced Convection Vaping Transform your DynaVap into a powerful ball vape with the BallR Cap—a revolutionary upgrade designed for better flavour, improved heat retention, and a pure convection experience. What Is the BallR Cap? The BallR Cap is an extended-length cap that works with any standard DynaVap tip. Inside the top portion, stainless steel balls absorb and retain heat from your torch or induction heater. When you inhale, the stored heat washes over your flower, providing a true ball vape experience with increased power and efficiency. Why Upgrade to the BallR Cap? Full Convection Heating: Unlike traditional DynaVap caps, which rely heavily on conduction, the BallR Cap shifts your vaping experience to pure convection. Heat is retained in the stainless steel balls and only released when you inhale, maximizing flavour and efficiency. Stronger, More Potent Vapour: By eliminating preheating of your flower, terpenes and volatile compounds remain intact until inhalation, ensuring better flavour and stronger effects. Improved Heat Retention: The stainless steel balls act as a heat reservoir, allowing for more consistent, powerful draws. Universal Compatibility: Works with any standard DynaVap tip, making it an easy upgrade for any DynaVap user. How to Use the BallR Cap Attach the BallR Cap to any standard DynaVap tip. Heat the cap using a torch or induction heater until it clicks. Inhale for a smooth, convection-powered vaporization experience. Enjoy the improved flavour, efficiency, and vapour density. FAQs About the BallR Cap Q: Will this fit my existing DynaVap setup?A: Yes! The BallR Cap is compatible with any standard DynaVap tip, making it a seamless upgrade. Q: How is this different from a regular DynaVap cap?A: Unlike a standard cap, the BallR Cap uses stainless steel balls to retain heat, shifting the device to true convection vaping. Q: Does this work with induction heaters?A: Yes! The BallR Cap works with both torch and induction heating, although performance is optimized for specific induction heaters like the Wand. Q: Is this more efficient than a regular DynaVap cap?A: Yes! Better heat retention means you extract more from your material with less waste, making your sessions more efficient and flavourful. Why Choose the BallR Cap? Enhanced Vapour Quality: Stronger, smoother, and more flavourful convection vapor. Budget-Friendly Upgrade: Affordable price for a game-changing enhancement. Versatile & Durable: Works with any standard DynaVap tip, built to last. Optimized for Induction & Torch Heating: Best performance with The Wand heater. Elevate your DynaVap experience with the BallR Cap—the most accessible way to enjoy the power of ball vapes in a portable format.

Read more less

There’s something about the simplicity of glass. DynaVap brings you the BB3, BB6 and BB9 glass stems to translate that straightforwardness and transparency to your DynaVap tips and experience. Available in three different sizes, with three colors available for each, the BB system is the simplest and purest way to use your DynaVap. The BBs work with any tip or cap that you own, and do not require a condenser like most of the DynaVap and after-market stems. Working well dry or through water filtration, the BB features an airport to easily clear a water piece without needing to remove the stem. The tube itself is fitted with glass nipples that both cool the extraction air by creating a more complex vapor pathway and act to hold the blue diffusion balls in place. As the shortest and most travel friendly stem, the BB3 has three diffusion balls and works with a 10mm female joint. The middle sized BB6 includes six diffusion balls and works with either a 14mm or 10mm female joint. Lastly, the largest BB9 offers the most cooling, with nine diffusion balls and like its middle sister, it works well with either 10mm or 14mm female joints. By bringing you the BB system, DynaVap now has a glass option for its well-known tips. Enjoy the purity and simplicity of glass with the DynaVap BB3, 6 and 9 stems.

Read more less

Bonger Silicone Water Pipe Adapter Those who think there’s only one way to skin a deer aren’t being creative enough. The boys at DynaVap get that, big time, and are always finding new ways for you to enjoy your current products in new and valuable ways. Enter the DynaVap Bonger, a new silicone accessory to use your favourite DynaVap tip and cap combination through a water piece. Use With Any Tip & Cap DynaVap is respected for the flexibility in their lineup, and this ingenious little guy is the perfect way to interface a DynaVap with a water piece. The Bonger works with any current tip and cap in their roster, showing the tendency towards compatibility that DynaVap has worked hard to establish. Stainless Airpath Only 45mm in length, the Bonger works with both 10mm and 14mm water pieces directly without needing another adapter. We’re really stoked on the stainless-steel condenser that runs directly from the CCD in your tip down through the Bonger and then out to the water piece. This takes the Bonger beyond just an adapter and adds both the purity of a stainless airpath and the easy-cleaning nature of metal to the system. Affordable & Airport-Free And for the first time ever… this DynaVap does NOT include an Airport! I know right? Mind blown. But the airflow is perfect for maximum thickness and milkiness action; adding additional airflow is totally unnecessary, this is engineered for performance. This super affordable accessory comes in black or green/black variation. If you already own a DynaVap tip and cap, the Bonger is your easy avenue to using them through water, which is probably our favourite way to use a DynaVap to begin with.

Read more less

Cap Armor — Stainless Steel Sleeve Upgrade for DynaVap Captive Caps More mass. More heat retention. More power — without replacing the cap you already love. Cap Armor is a precision-machined stainless steel sleeve designed to snap over a compatible DynaVap Captive Cap, adding serious thermal mass and heat retention to your setup. Think of it as a modular alternative to an Armored Cap: you keep using the cap you already trust, but you gain a smoother, more consistent heat cycle and a noticeable bump in extraction performance. The big quality-of-life upgrade is heating. With the added mass surrounding the cap, heat spreads more evenly through the sleeve, so you can point your torch and heat without constantly spinning your device. That means less technique, less hot-spotting, and an easier path to repeatable results—especially for anyone chasing that “one-hit” style extraction. In real-world use, Cap Armor helps push your DynaVap toward full extractions in 1–2 heat cycles with less guesswork. Because it’s modular, Cap Armor can be installed or removed whenever you want. It’s not difficult to take on and off, but if you plan on using it daily, many users prefer dedicating one to each cap in their rotation. It’s inexpensive, it’ll last forever, and it’s one of those upgrades that just makes the whole DynaVap experience easier and more effective. Features Modular performance upgrade: Precision-machined stainless steel sleeve that clicks onto compatible Captive Caps to add mass instantly. Enhanced heat retention: Added thermal mass smooths heating, extends cycles, and improves thermal consistency. No-spin heating: More even heat spread means you can aim the torch and heat without constant rotation. Stronger extractions: Helps achieve full extraction in 1–2 heat cycles. Microdose friendly: Still works with the DynaVap half-bowl setting for extremely efficient small loads. Built to last: Stainless steel construction designed for years of daily use. Compatibility Compatible with: Captive Caps in good condition Not recommended for use with: Non-Captive Caps, dented caps, PVD-coated caps, or Special Edition engraved caps How to Use Install: With your Captive Cap on an assembled device, gently press the cap into Cap Armor until you hear an audible click. Remove: While the cap is installed on a tip, brace your thumb on the digger-outer against the tip, then gently wiggle and pull Cap Armor off. Do not push from the top to separate—this may dent the cap. Notes Because this is a press-fit design, minor dents or impressions on the upper crimp of the Captive Cap are possible. This is normal and will not affect function of either part. Sneaky Pete Vaporizers — U.S. source for DynaVap parts, performance upgrades, and accessories. Read our full in-depth review of Cap Armor Upgrade for DynaVap: More Heat Retention, Less Technique, Better Results here.

Read more less

The new Captive Cap will help to keep your Cap right where it should be; on your device. The new Captive Cap brings about enhanced functional geometry, creating more evenly distributed airflow. In addition, the heat up and cool down 'clicks' are more noticeable. The updated Captive Cap stays firmly in place, while still rotating freely on the DynaVap. The new Cap will work on any DynaVap tip to allow for full cross compatibility.

Read more less

The DynaVap series is another killer vaporizer that doesn't need a battery! The units are absolutely tiny but provide an amazing vapor experience. The Stainless Steel Circumferential Compression Diffuser (CCD) acts as both a screen for your DynaVap and to adjust the size of the bowl. The precision cut discs allow for maximum airflow to pass through while filtering out any particulate and preventing you from inhaling plant matter. These Stainless CCDs can be used with either the stainless steel or titanium tips. The Titanium Circumferential Compression Diffuser (CCD) acts as both a screen for your DynaVap and to adjust the size of the bowl. The precision cut discs allow for maximum airflow to pass through, while filtering out any particulate and preventing you from inhaling plant matter. Titanium is often considered the material of choice by vaporizer enthusiasts, and these CCDs have been specially engineered for superior airflow. These Titanium CCDs can be used with either the stainless steel or titanium tips. A 3 Pack of either metal will last you for months and months of regular use. The CCDs will last for some time with regular care; replace when looking worn, bent, or clogged beyond repair.

Read more less

The DynaVap DynaCoil is made from a single piece of precision-engineered titanium and works to fully vaporize almost any variety or consistency of concentrate. The porous design of the DynaCoil allows the concentrate to soak in and fully saturate the coil, meaning a lot of surface area for vaporization of your concentrate and great airflow regardless of your load size. This method of vaporization means you get outstanding flavor and great efficiency from your concentrate. A must-have accessory for any DynaVap owner interested in concentrates!

Read more less

The DynaKit Basic has everything you need for your DynaVap! This kit is designed as a one-purchase solution for all common items you may lose or need to replace through regular wear and tear. Many people buy these items individually and spend quite a bit more, so you may want to consider bundling everything at once to save time and money!

Read more less

The DynaStash is a sweet complement to your DynaVap vaporizer, coming in many attractive wood options. The reserve itself holds a generous amount of ground material, making it super easy to load your DynaVap: simply press into the material, twist, and you're ready to go. The DynaStash also has a compartment to store your DynaVap so you can keep it all together in one neat pack. And the magnet holds your DynaVap when not in use, allowing it to cool down between hits. A great little accessory for all DynaVap users. Key features: - Handmade in the USA.- Each DynaStash has a unique grain pattern so no two are alike.- Holds any DynaVap vaporizer except XL models or the Fat Mouthpiece.- The magnet holds your DynaVap between hits, even while hot.- The large storage reserve holds enough ground material for many bowls.- The ER models include a removable silicone container to store concentrates.- Available in a variety of woods.

Read more less